From: Anderson Briglia <anderson.briglia@indt.org.br>
To: ext David Cohen <david.cohen@indt.org.br>
Cc: linux-omap@vger.kernel.org, linux-omap-open-source@linux.omap.com
Subject: Re: [PATCH 1/2] OMAP Security HW accel: Adding base address and interruption on header files.
Date: Tue, 11 Dec 2007 11:10:26 -0400 [thread overview]
Message-ID: <475EA862.8020708@indt.org.br> (raw)
In-Reply-To: <1196980234-14975-1-git-send-email-david.cohen@indt.org.br>
Hi David,
I just tested and it is working fine.
Acked-by: Anderson Briglia <anderson.briglia@indt.org.br>
ext David Cohen wrote:
> This patch adds the base address and interruption on header files for the
> OMAP security hw module acceleration.
>
> Signed-off-by: David Cohen <david.cohen@indt.org.br>
> ---
> include/asm-arm/arch-omap/irqs.h | 2 ++
> include/asm-arm/arch-omap/omap16xx.h | 5 +++++
> include/asm-arm/arch-omap/omap24xx.h | 8 ++++++++
> 3 files changed, 15 insertions(+), 0 deletions(-)
>
> diff --git a/include/asm-arm/arch-omap/irqs.h b/include/asm-arm/arch-omap/irqs.h
> index ec58dfd..1242696 100644
> --- a/include/asm-arm/arch-omap/irqs.h
> +++ b/include/asm-arm/arch-omap/irqs.h
> @@ -177,6 +177,7 @@
> #define INT_1610_DMA_CH14 (61 + IH2_BASE)
> #define INT_1610_DMA_CH15 (62 + IH2_BASE)
> #define INT_1610_NAND (63 + IH2_BASE)
> +#define INT_1610_SHA1MD5 (91 + IH2_BASE)
>
> /*
> * OMAP-730 specific IRQ numbers for interrupt handler 2
> @@ -264,6 +265,7 @@
> #define INT_24XX_GPTIMER10 46
> #define INT_24XX_GPTIMER11 47
> #define INT_24XX_GPTIMER12 48
> +#define INT_24XX_SHA1MD5 51
> #define INT_24XX_I2C1_IRQ 56
> #define INT_24XX_I2C2_IRQ 57
> #define INT_24XX_HDQ_IRQ 58
> diff --git a/include/asm-arm/arch-omap/omap16xx.h b/include/asm-arm/arch-omap/omap16xx.h
> index db85276..d576e59 100644
> --- a/include/asm-arm/arch-omap/omap16xx.h
> +++ b/include/asm-arm/arch-omap/omap16xx.h
> @@ -44,6 +44,11 @@
> #define OMAP16XX_DSPREG_SIZE SZ_128K
> #define OMAP16XX_DSPREG_START 0xE1000000
>
> +#define OMAP16XX_SEC_BASE 0xFFFE4000
> +#define OMAP16XX_SEC_DES (OMAP16XX_SEC_BASE + 0x0000)
> +#define OMAP16XX_SEC_SHA1MD5 (OMAP16XX_SEC_BASE + 0x0800)
> +#define OMAP16XX_SEC_RNG (OMAP16XX_SEC_BASE + 0x1000)
> +
> /*
> * ---------------------------------------------------------------------------
> * Interrupts
> diff --git a/include/asm-arm/arch-omap/omap24xx.h b/include/asm-arm/arch-omap/omap24xx.h
> index adc89a8..3d6673d 100644
> --- a/include/asm-arm/arch-omap/omap24xx.h
> +++ b/include/asm-arm/arch-omap/omap24xx.h
> @@ -48,6 +48,7 @@
> #define OMAP2420_PRM_BASE OMAP2420_CM_BASE
> #define OMAP2420_SDRC_BASE (L3_24XX_BASE + 0x9000)
> #define OMAP2420_SMS_BASE 0x68008000
> +#define OMAP2420_SEC_BASE (L4_24XX_BASE + 0xA0000)
>
> #define OMAP2430_32KSYNCT_BASE (L4_WK_243X_BASE + 0x20000)
> #define OMAP2430_PRCM_BASE (L4_WK_243X_BASE + 0x6000)
> @@ -77,6 +78,13 @@
> /* Camera */
> #define OMAP24XX_CAMERA_BASE (L4_24XX_BASE + 0x52000)
>
> +/* Security */
> +#define OMAP2420_SEC_RNG_BASE (OMAP2420_SEC_BASE + 0x0000)
> +#define OMAP2420_SEC_DES_BASE (OMAP2420_SEC_BASE + 0x2000)
> +#define OMAP2420_SEC_SHA1MD5_BASE (OMAP2420_SEC_BASE + 0x4000)
> +#define OMAP2420_SEC_AES_BASE (OMAP2420_SEC_BASE + 0x6000)
> +#define OMAP2420_SEC_PKA_BASE (OMAP2420_SEC_BASE + 0x8000)
> +
> #if defined(CONFIG_ARCH_OMAP2420)
>
> #define OMAP2_32KSYNCT_BASE OMAP2420_32KSYNCT_BASE
next parent reply other threads:[~2007-12-11 15:10 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1196980234-14975-1-git-send-email-david.cohen@indt.org.br>
2007-12-11 15:10 ` Anderson Briglia [this message]
[not found] ` <1196980234-14975-2-git-send-email-david.cohen@indt.org.br>
2007-12-11 15:15 ` [PATCH 2/2] OMAP SHA1/MD5 module: Add suppor for SHA1/MD5 algorithm on OMAP Anderson Briglia
2007-12-12 7:20 ` Vivek Kutal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=475EA862.8020708@indt.org.br \
--to=anderson.briglia@indt.org.br \
--cc=david.cohen@indt.org.br \
--cc=linux-omap-open-source@linux.omap.com \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.