From mboxrd@z Thu Jan  1 00:00:00 1970
Message-ID: <476805F3.5000409@domain.hid>
Date: Tue, 18 Dec 2007 19:40:03 +0200
From: Maksym Veremeyenko <verem@domain.hid>
MIME-Version: 1.0
References: <0C9896A4B6D338488AD6FFFE58BAEF1001DB8EEF@serveur3.lgm.com>
	<4762A57F.2020909@domain.hid>
	<0C9896A4B6D338488AD6FFFE58BAEF1001EECC33@domain.hid>
	<4767FA80.1060403@domain.hid>
	<0C9896A4B6D338488AD6FFFE58BAEF1001EECCF9@domain.hid>
In-Reply-To: <0C9896A4B6D338488AD6FFFE58BAEF1001EECCF9@domain.hid>
Content-Type: text/plain; charset=KOI8-U; format=flowed
Content-Transfer-Encoding: quoted-printable
Subject: Re: [Xenomai-help] CP-118U RTDM Driver
List-Id: Help regarding installation and common use of Xenomai
	<xenomai.xenomai.org>
List-Unsubscribe: <https://mail.gna.org/listinfo/xenomai-help>,
	<mailto:xenomai-help-request@domain.hid>
List-Archive: </public/xenomai-help>
List-Post: <mailto:xenomai@xenomai.org>
List-Help: <mailto:xenomai-help-request@domain.hid>
List-Subscribe: <https://mail.gna.org/listinfo/xenomai-help>,
	<mailto:xenomai-help-request@domain.hid>
To: DOURNES Guillaume <Guillaume.DOURNES@lgm.fr>
Cc: xenomai@xenomai.org

DOURNES Guillaume =D0=C9=DB=C5=D4:
> Even if I add the baud_base parameter, the rxevent never appears.
> Moreover when I test the mother board port, the rtser0 number increase =
in cat /proc/xenomai/irq when the soft is running. But when I test a moxa=
 port, the rtser0 number stay always to the same value (7000 in my last t=
est).
could you provide complete modprobe command and output.
could you check jumper setting on moxa board.

--=20
________________________________________
Maksym Veremeyenko