From: Jan Kiszka <jan.kiszka-kv7WeFo6aLtBDgjK7y7TUQ@public.gmane.org>
To: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Cc: kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: Re: [PATCH] align gdbstub with QEMU
Date: Thu, 20 Dec 2007 15:57:25 +0100 [thread overview]
Message-ID: <476A82D5.8040306@siemens.com> (raw)
In-Reply-To: <476290CA.2040001-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Avi Kivity wrote:
> Jan Kiszka wrote:
>> Jan Kiszka wrote:
>>
>>> We've noticed some problems with current gdbstub in kvm's qemu:
>>>
>>> # qemu-system-x86_64 -hda myimage -S -s &
>>> # gdb
>>> (gdb) tar re :1234
>>> Remote debugging using :1234
>>> Remote 'g' packet reply is too long:
>>> 000000000000000000000000000000000000[...]
>>>
>>> This issue did not occur with QEMU from CVS. As I was aware of an
>>> x86_64-related problem in QEMU's gdbstub, I merged its current state
>>> into kvm - and things start to work again. Find the update patch below.
>>>
>>
>> Any feedback on this? Any chance to see this patch (or some similar
>> version) in kvm-57?
>>
>>
>
> Sorry for the non-response. I am hoping to get qemu-cvs merged for
> kvm-57, which will naturally include this. If that doesn't work out
> (i.e. we discover regressions), and if this is important for you, I will
> apply the patch.
The qemu update did take place for -57, but a bit too mechanically.
Please merge this patch to finally fix the gdbstub.
Thanks,
Jan
Remove left-over from qemu CVS update.
Signed-off-by: Jan Kiszka <jan.kiszka-kv7WeFo6aLtBDgjK7y7TUQ@public.gmane.org>
---
qemu/gdbstub.c | 136 ---------------------------------------------------------
1 file changed, 1 insertion(+), 135 deletions(-)
Index: kvm-userspace/qemu/gdbstub.c
===================================================================
--- kvm-userspace.orig/qemu/gdbstub.c
+++ kvm-userspace/qemu/gdbstub.c
@@ -225,141 +225,7 @@ static int put_packet(GDBState *s, char
return 0;
}
-#if defined(TARGET_X86_64)
-
-static int cpu_gdb_read_registers(CPUState *env, uint8_t *mem_buf)
-{
- uint8_t *p = mem_buf;
- int i, fpus;
-
-#define PUTREG(x) do { \
- target_ulong reg = tswapl(x); \
- memcpy(p, ®, sizeof reg); \
- p += sizeof reg; \
- } while (0)
-#define PUTREG32(x) do { \
- uint32_t reg = tswap32(x); \
- memcpy(p, ®, sizeof reg); \
- p += sizeof reg; \
- } while (0)
-#define PUTREGF(x) do { \
- memcpy(p, &(x), 10); \
- p += sizeof (x); \
- } while (0)
-
- PUTREG(env->regs[R_EAX]);
- PUTREG(env->regs[R_EBX]);
- PUTREG(env->regs[R_ECX]);
- PUTREG(env->regs[R_EDX]);
- PUTREG(env->regs[R_ESI]);
- PUTREG(env->regs[R_EDI]);
- PUTREG(env->regs[R_EBP]);
- PUTREG(env->regs[R_ESP]);
- PUTREG(env->regs[8]);
- PUTREG(env->regs[9]);
- PUTREG(env->regs[10]);
- PUTREG(env->regs[11]);
- PUTREG(env->regs[12]);
- PUTREG(env->regs[13]);
- PUTREG(env->regs[14]);
- PUTREG(env->regs[15]);
-
- PUTREG(env->eip);
- PUTREG32(env->eflags);
- PUTREG32(env->segs[R_CS].selector);
- PUTREG32(env->segs[R_SS].selector);
- PUTREG32(env->segs[R_DS].selector);
- PUTREG32(env->segs[R_ES].selector);
- PUTREG32(env->segs[R_FS].selector);
- PUTREG32(env->segs[R_GS].selector);
- /* XXX: convert floats */
- for(i = 0; i < 8; i++) {
- PUTREGF(env->fpregs[i]);
- }
- PUTREG32(env->fpuc);
- fpus = (env->fpus & ~0x3800) | (env->fpstt & 0x7) << 11;
- PUTREG32(fpus);
- PUTREG32(0); /* XXX: convert tags */
- PUTREG32(0); /* fiseg */
- PUTREG32(0); /* fioff */
- PUTREG32(0); /* foseg */
- PUTREG32(0); /* fooff */
- PUTREG32(0); /* fop */
-
-#undef PUTREG
-#undef PUTREG32
-#undef PUTREGF
-
- return p - mem_buf;
-}
-
-static void cpu_gdb_write_registers(CPUState *env, uint8_t *mem_buf, int size)
-{
- uint8_t *p = mem_buf;
- uint32_t junk;
- int i, fpus;
-
-#define GETREG(x) do { \
- target_ulong reg; \
- memcpy(®, p, sizeof reg); \
- x = tswapl(reg); \
- p += sizeof reg; \
- } while (0)
-#define GETREG32(x) do { \
- uint32_t reg; \
- memcpy(®, p, sizeof reg); \
- x = tswap32(reg); \
- p += sizeof reg; \
- } while (0)
-#define GETREGF(x) do { \
- memcpy(&(x), p, 10); \
- p += 10; \
- } while (0)
-
- GETREG(env->regs[R_EAX]);
- GETREG(env->regs[R_EBX]);
- GETREG(env->regs[R_ECX]);
- GETREG(env->regs[R_EDX]);
- GETREG(env->regs[R_ESI]);
- GETREG(env->regs[R_EDI]);
- GETREG(env->regs[R_EBP]);
- GETREG(env->regs[R_ESP]);
- GETREG(env->regs[8]);
- GETREG(env->regs[9]);
- GETREG(env->regs[10]);
- GETREG(env->regs[11]);
- GETREG(env->regs[12]);
- GETREG(env->regs[13]);
- GETREG(env->regs[14]);
- GETREG(env->regs[15]);
-
- GETREG(env->eip);
- GETREG32(env->eflags);
- GETREG32(env->segs[R_CS].selector);
- GETREG32(env->segs[R_SS].selector);
- GETREG32(env->segs[R_DS].selector);
- GETREG32(env->segs[R_ES].selector);
- GETREG32(env->segs[R_FS].selector);
- GETREG32(env->segs[R_GS].selector);
- /* XXX: convert floats */
- for(i = 0; i < 8; i++) {
- GETREGF(env->fpregs[i]);
- }
- GETREG32(env->fpuc);
- GETREG32(fpus); /* XXX: convert fpus */
- GETREG32(junk); /* XXX: convert tags */
- GETREG32(junk); /* fiseg */
- GETREG32(junk); /* fioff */
- GETREG32(junk); /* foseg */
- GETREG32(junk); /* fooff */
- GETREG32(junk); /* fop */
-
-#undef GETREG
-#undef GETREG32
-#undef GETREGF
-}
-
-#elif defined(TARGET_I386)
+#if defined(TARGET_I386)
static int cpu_gdb_read_registers(CPUState *env, uint8_t *mem_buf)
{
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
next prev parent reply other threads:[~2007-12-20 14:57 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-07 13:24 [PATCH] align gdbstub with QEMU Jan Kiszka
[not found] ` <47594974.4010805-kv7WeFo6aLtBDgjK7y7TUQ@public.gmane.org>
2007-12-14 11:57 ` Jan Kiszka
[not found] ` <47626F8F.8010806-kv7WeFo6aLtBDgjK7y7TUQ@public.gmane.org>
2007-12-14 14:18 ` Avi Kivity
[not found] ` <476290CA.2040001-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
2007-12-14 14:27 ` Jan Kiszka
[not found] ` <476292CD.3020703-kv7WeFo6aLtBDgjK7y7TUQ@public.gmane.org>
2007-12-14 14:31 ` Avi Kivity
2007-12-20 14:57 ` Jan Kiszka [this message]
[not found] ` <476A82D5.8040306-kv7WeFo6aLtBDgjK7y7TUQ@public.gmane.org>
2007-12-20 15:06 ` Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=476A82D5.8040306@siemens.com \
--to=jan.kiszka-kv7wefo6altbdgjk7y7tuq@public.gmane.org \
--cc=avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org \
--cc=kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.