From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from correo.ziv.es (correo.ziv.es [212.55.31.237]) by ozlabs.org (Postfix) with ESMTP id 7F013DDDF7 for ; Fri, 28 Dec 2007 02:17:50 +1100 (EST) Message-ID: <4773C21B.5000206@ziv.es> Date: Thu, 27 Dec 2007 16:17:47 +0100 From: "Miguel Angel Alvarez" MIME-Version: 1.0 To: "Miguel Angel Alvarez" Subject: Re: Using SPI in lite5200 References: <477385A4.8020808@ziv.es> In-Reply-To: <477385A4.8020808@ziv.es> Content-Type: text/plain; format=flowed; charset="iso-8859-1" Cc: linuxppc-embedded@ozlabs.org List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Hi It seems the problem is much harder that I thought. I was trying to use=20 SPI_MOSI, SPI_MISO, SPI_SS and SPI_CLK lines in the PSC3 of my MPC5200,=20 and this made me thought that I could use the "mpc52xx-psc-spi" driver. Reading better the user guide, I have found that the "mpc52xx-psc-spi"=20 driver is related to the "codec" spi of the PSC3 and not to the SPI=20 subsystem. Am I right? In this case... Which code should I use as "master driver"?=20 mpc52xx-devices.c talks about a "mpc52xx-spi" driver, but I cannot find=20 it. Does it exist? All suggestions will be appreciated. Thanks Miguel =C1ngel=20 =20 ----------------------------------------- PLEASE NOTE = ------------------------------------------- This message, along with any attachments, may be confidential or legally = privileged.=20 It is intended only for the named person(s), who is/are the only = authorized recipients. If this message has reached you in error, kindly destroy it without = review and notify the sender immediately. Thank you for your help. =B5SysCom uses virus scanning software but excludes any liability for = viruses contained in any attachment. =20 ------------------------------------ ROGAMOS LEA ESTE TEXTO = ------------------------------- Este mensaje y sus anexos pueden contener informaci=F3n confidencial y/o = con derecho legal.=20 Est=E1 dirigido =FAnicamente a la/s persona/s o entidad/es rese=F1adas = como =FAnico destinatario autorizado. Si este mensaje le hubiera llegado por error, por favor elim=EDnelo sin = revisarlo ni reenviarlo y notif=EDquelo inmediatamente al remitente. = Gracias por su colaboraci=F3n. =20 =B5SysCom utiliza software antivirus, pero no se hace responsable de los = virus contenidos en los ficheros anexos.