Re: [lm-sensors] abituguru3 does not work with Abit IX38

[Hans de Goede <j.w.r.degoede@hhs.nl>]

[-- Attachment #1: Type: text/plain, Size: 924 bytes --]

David Bender wrote:
> Hi all,
>   I am attempting to use abituguru3 with my Abit IX38 motherboard. Error message is
> 
> abituguru3: error unknown motherboard ID: 001C. Please report this to the
> abituguru3 maintainer (see MAINTAINERS)
> 
> Kernel version is 2.6.23-r5, gentoo sources.
>

This is already fixed in 2.6.24, patch attached for your pleasure.


> I understand later versions of abit boards may not be supported, but my CPU fan
> is spinning way faster than it should and drives me crazy. Any pointers or test
> programs would be appreciated.
> 

I'm afraid that the abituguru3 driver only supports reading sensors and 
sensors settings, the pwm part is completely unsupported, not even 
reading the settings is supported.

However one can usually fully tune the fan settings in Abit's BIOS, and 
if you can hear the fan I guess you're close enough to the machine to 
get into its BIOS setup :)

Regards,

Hans

[-- Attachment #2: hwmon-abituguru3-new-motherboards-v2.patch --]
[-- Type: text/x-patch, Size: 2575 bytes --]

This patch adds support for 2 new motherboards to the abituguru3 driver. This
time with list terminators and closing brackets, sorry about the bad previous
patch.

Signed-of-by: Hans de Goede <j.w.r.degoede@hhs.nl>
diff -up linux-2.6.23.x86_64/drivers/hwmon/abituguru3.c~ linux-2.6.23.x86_64/drivers/hwmon/abituguru3.c
--- linux-2.6.23.x86_64/drivers/hwmon/abituguru3.c~	2007-10-21 00:47:36.000000000 +0200
+++ linux-2.6.23.x86_64/drivers/hwmon/abituguru3.c	2007-10-21 00:47:36.000000000 +0200
@@ -530,6 +530,60 @@ static const struct abituguru3_motherboa
 		{ "AUX3 Fan",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
+	{ 0x001B, "unknown", {
+		{ "CPU Core",		 0, 0, 10, 1, 0 },
+		{ "DDR3",		 1, 0, 20, 1, 0 },
+		{ "DDR3 VTT",		 2, 0, 10, 1, 0 },
+		{ "CPU VTT",		 3, 0, 10, 1, 0 },
+		{ "MCH 1.25V",		 4, 0, 10, 1, 0 },
+		{ "ICHIO 1.5V",		 5, 0, 10, 1, 0 },
+		{ "ICH 1.05V",		 6, 0, 10, 1, 0 },
+		{ "ATX +12V (24-Pin)",	 7, 0, 60, 1, 0 },
+		{ "ATX +12V (8-pin)",	 8, 0, 60, 1, 0 },
+		{ "ATX +5V",		 9, 0, 30, 1, 0 },
+		{ "+3.3V",		10, 0, 20, 1, 0 },
+		{ "5VSB",		11, 0, 30, 1, 0 },
+		{ "CPU",		24, 1, 1, 1, 0 },
+		{ "System",		25, 1, 1, 1, 0 },
+		{ "PWM Phase1",		26, 1, 1, 1, 0 },
+		{ "PWM Phase2",		27, 1, 1, 1, 0 },
+		{ "PWM Phase3",		28, 1, 1, 1, 0 },
+		{ "PWM Phase4",		29, 1, 1, 1, 0 },
+		{ "PWM Phase5",		30, 1, 1, 1, 0 },
+		{ "CPU Fan",		32, 2, 60, 1, 0 },
+		{ "SYS Fan",		34, 2, 60, 1, 0 },
+		{ "AUX1 Fan",		33, 2, 60, 1, 0 },
+		{ "AUX2 Fan",		35, 2, 60, 1, 0 },
+		{ "AUX3 Fan",		36, 2, 60, 1, 0 },
+		{ NULL, 0, 0, 0, 0, 0 } }
+	},
+	{ 0x001C, "unknown", {
+		{ "CPU Core",		 0, 0, 10, 1, 0 },
+		{ "DDR2",		 1, 0, 20, 1, 0 },
+		{ "DDR2 VTT",		 2, 0, 10, 1, 0 },
+		{ "CPU VTT",		 3, 0, 10, 1, 0 },
+		{ "MCH 1.25V",		 4, 0, 10, 1, 0 },
+		{ "ICHIO 1.5V",		 5, 0, 10, 1, 0 },
+		{ "ICH 1.05V",		 6, 0, 10, 1, 0 },
+		{ "ATX +12V (24-Pin)",	 7, 0, 60, 1, 0 },
+		{ "ATX +12V (8-pin)",	 8, 0, 60, 1, 0 },
+		{ "ATX +5V",		 9, 0, 30, 1, 0 },
+		{ "+3.3V",		10, 0, 20, 1, 0 },
+		{ "5VSB",		11, 0, 30, 1, 0 },
+		{ "CPU",		24, 1, 1, 1, 0 },
+		{ "System",		25, 1, 1, 1, 0 },
+		{ "PWM Phase1",		26, 1, 1, 1, 0 },
+		{ "PWM Phase2",		27, 1, 1, 1, 0 },
+		{ "PWM Phase3",		28, 1, 1, 1, 0 },
+		{ "PWM Phase4",		29, 1, 1, 1, 0 },
+		{ "PWM Phase5",		30, 1, 1, 1, 0 },
+		{ "CPU Fan",		32, 2, 60, 1, 0 },
+		{ "SYS Fan",		34, 2, 60, 1, 0 },
+		{ "AUX1 Fan",		33, 2, 60, 1, 0 },
+		{ "AUX2 Fan",		35, 2, 60, 1, 0 },
+		{ "AUX3 Fan",		36, 2, 60, 1, 0 },
+		{ NULL, 0, 0, 0, 0, 0 } }
+	},
 	{ 0x0000, NULL, { { NULL, 0, 0, 0, 0, 0 } } }
 };
 

[-- Attachment #3: Type: text/plain, Size: 153 bytes --]

_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors