From: Philip Langdale <philipl@overt.org>
To: linux-kernel@vger.kernel.org, Pierre Ossman <drzeus@drzeus.cx>,
sdhci-devel@list.drzeus.cx
Subject: [PATCH] mmc: Handle suspend/resume in Ricoh MMC disabler
Date: Sat, 29 Dec 2007 00:11:42 -0800 [thread overview]
Message-ID: <4776013E.3070806@overt.org> (raw)
As pci config space is reinitialised on a suspend/resume cycle, the
disabler needs to work its magic at resume time. For symmetry this
change also explicitly enables the controller at suspend time but
it's not strictly necessary.
Signed-off-by: Philipl Langdale <philipl@overt.org>
--- linux-2.6.24/drivers/mmc/host/ricoh_mmc.c 2007-12-28 17:18:18.000000000 -0800
+++ linux-2.6.24-phil/drivers/mmc/host/ricoh_mmc.c 2007-12-29 00:05:30.000000000 -0800
@@ -41,6 +41,46 @@
MODULE_DEVICE_TABLE(pci, pci_ids);
+static int ricoh_mmc_disable(struct pci_dev *fw_dev)
+{
+ u8 write_enable;
+ u8 disable;
+
+ pci_read_config_byte(fw_dev, 0xCB, &disable);
+ if (disable & 0x02) {
+ printk(KERN_INFO DRIVER_NAME
+ ": Controller already disabled. Nothing to do.\n");
+ return -ENODEV;
+ }
+
+ pci_read_config_byte(fw_dev, 0xCA, &write_enable);
+ pci_write_config_byte(fw_dev, 0xCA, 0x57);
+ pci_write_config_byte(fw_dev, 0xCB, disable | 0x02);
+ pci_write_config_byte(fw_dev, 0xCA, write_enable);
+
+ printk(KERN_INFO DRIVER_NAME
+ ": Controller is now disabled.\n");
+
+ return 0;
+}
+
+static int ricoh_mmc_enable(struct pci_dev *fw_dev)
+{
+ u8 write_enable;
+ u8 disable;
+
+ pci_read_config_byte(fw_dev, 0xCA, &write_enable);
+ pci_read_config_byte(fw_dev, 0xCB, &disable);
+ pci_write_config_byte(fw_dev, 0xCA, 0x57);
+ pci_write_config_byte(fw_dev, 0xCB, disable & ~0x02);
+ pci_write_config_byte(fw_dev, 0xCA, write_enable);
+
+ printk(KERN_INFO DRIVER_NAME
+ ": Controller is now re-enabled.\n");
+
+ return 0;
+}
+
static int __devinit ricoh_mmc_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
@@ -61,26 +101,12 @@
while ((fw_dev = pci_get_device(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, fw_dev))) {
if (PCI_SLOT(pdev->devfn) == PCI_SLOT(fw_dev->devfn) &&
pdev->bus == fw_dev->bus) {
- u8 write_enable;
- u8 disable;
-
- pci_read_config_byte(fw_dev, 0xCB, &disable);
- if (disable & 0x02) {
- printk(KERN_INFO DRIVER_NAME
- ": Controller already disabled. Nothing to do.\n");
+ if (ricoh_mmc_disable(fw_dev) != 0) {
return -ENODEV;
}
- pci_read_config_byte(fw_dev, 0xCA, &write_enable);
- pci_write_config_byte(fw_dev, 0xCA, 0x57);
- pci_write_config_byte(fw_dev, 0xCB, disable | 0x02);
- pci_write_config_byte(fw_dev, 0xCA, write_enable);
-
pci_set_drvdata(pdev, fw_dev);
- printk(KERN_INFO DRIVER_NAME
- ": Controller is now disabled.\n");
-
break;
}
}
@@ -96,30 +122,51 @@
static void __devexit ricoh_mmc_remove(struct pci_dev *pdev)
{
- u8 write_enable;
- u8 disable;
struct pci_dev *fw_dev = NULL;
fw_dev = pci_get_drvdata(pdev);
BUG_ON(fw_dev == NULL);
- pci_read_config_byte(fw_dev, 0xCA, &write_enable);
- pci_read_config_byte(fw_dev, 0xCB, &disable);
- pci_write_config_byte(fw_dev, 0xCA, 0x57);
- pci_write_config_byte(fw_dev, 0xCB, disable & ~0x02);
- pci_write_config_byte(fw_dev, 0xCA, write_enable);
-
- printk(KERN_INFO DRIVER_NAME
- ": Controller is now re-enabled.\n");
+ ricoh_mmc_enable(fw_dev);
pci_set_drvdata(pdev, NULL);
}
+static int ricoh_mmc_suspend (struct pci_dev *pdev, pm_message_t state)
+{
+ struct pci_dev *fw_dev = NULL;
+
+ fw_dev = pci_get_drvdata(pdev);
+ BUG_ON(fw_dev == NULL);
+
+ printk(KERN_INFO DRIVER_NAME ": Suspending.\n");
+
+ ricoh_mmc_enable(fw_dev);
+
+ return 0;
+}
+
+static int ricoh_mmc_resume (struct pci_dev *pdev)
+{
+ struct pci_dev *fw_dev = NULL;
+
+ fw_dev = pci_get_drvdata(pdev);
+ BUG_ON(fw_dev == NULL);
+
+ printk(KERN_INFO DRIVER_NAME ": Resuming.\n");
+
+ ricoh_mmc_disable(fw_dev);
+
+ return 0;
+}
+
static struct pci_driver ricoh_mmc_driver = {
.name = DRIVER_NAME,
.id_table = pci_ids,
.probe = ricoh_mmc_probe,
.remove = __devexit_p(ricoh_mmc_remove),
+ .suspend = ricoh_mmc_suspend,
+ .resume = ricoh_mmc_resume,
};
/*****************************************************************************\
next reply other threads:[~2007-12-29 8:58 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-29 8:11 Philip Langdale [this message]
2008-01-05 22:20 ` [PATCH] mmc: Handle suspend/resume in Ricoh MMC disabler Pierre Ossman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4776013E.3070806@overt.org \
--to=philipl@overt.org \
--cc=drzeus@drzeus.cx \
--cc=linux-kernel@vger.kernel.org \
--cc=sdhci-devel@list.drzeus.cx \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.