All of lore.kernel.org
 help / color / mirror / Atom feed
* DCF receiver as frequency normal ?
@ 2008-01-06 11:15 Erik Jakobsen
  2008-01-08 21:15 ` John Magliacane
  0 siblings, 1 reply; 2+ messages in thread
From: Erik Jakobsen @ 2008-01-06 11:15 UTC (permalink / raw)
  To: linux-hams

Hi.

Up here in Denmark we used to use the Kalundborg Longwave transmitter as
frequency normal for frequency coumters.
This did stop at the first of year 2007 as the station closed.

I then thought, if I could use many of the DCF clocks I have here in the
house.

Has anyone made that, or know where to find information about such a
project ?

-- 
Venlig hilsen - Best regards - Erik Jakobsen
Licensed HAM-RADIO with the callsign OZ4KK
http://www.urbakken.dk
Registered Linux user #114875 with http://counter.li.org


^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: DCF receiver as frequency normal ?
  2008-01-06 11:15 DCF receiver as frequency normal ? Erik Jakobsen
@ 2008-01-08 21:15 ` John Magliacane
  0 siblings, 0 replies; 2+ messages in thread
From: John Magliacane @ 2008-01-08 21:15 UTC (permalink / raw)
  To: Erik Jakobsen, linux-hams

--- Erik Jakobsen <erik_ja@mail.tele.dk> wrote:

> Hi.
> 
> Up here in Denmark we used to use the Kalundborg Longwave
> transmitter as frequency normal for frequency coumters.
> This did stop at the first of year 2007 as the station closed.
> 
> I then thought, if I could use many of the DCF clocks I have
> here in the house.
> 
> Has anyone made that, or know where to find information about
> such a project ?

I think it might be rather difficult since most DCF, MSF, WWVB
time code receivers are essentially TRF designs with a tuning
fork crystal to provide the needed selectivity.

A receiver using synchronous detection might be better suited for
DCF carrier reception and extraction.

DCF's 77.5 kHz is a bit odd, but there is probably a way of
dividing a stable crystal oscillator down in a way that it can
be phase compared to DCF's carrier, with the resulting error
voltage being fed back to the crystal oscillator to steer it
into agreement with DCF's atomically controlled carrier.

I use a synchronous detection approach in the US using WWVB's
carrier on 60 kHz.  My homebrew receiver disciplines a 10 MHz
crystal oscillator which in turn serves as a timebase for my
homebrew frequency counter.  It works very well.


73, de John, KD2BD


Visit John on the Web at:

	http://kd2bd.ham.org/
.
.
.
.


      ____________________________________________________________________________________
Never miss a thing.  Make Yahoo your home page. 
http://www.yahoo.com/r/hs

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2008-01-08 21:15 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-01-06 11:15 DCF receiver as frequency normal ? Erik Jakobsen
2008-01-08 21:15 ` John Magliacane

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.