From: Dennison Williams <evoltech@2inches.com>
To: linux-crypto@vger.kernel.org
Subject: Re: ext3 filesystem is not recognized after losetup -e aes
Date: Mon, 07 Jan 2008 12:37:28 -0800 [thread overview]
Message-ID: <47828D88.2080903@2inches.com> (raw)
In-Reply-To: <477F2813.3010003@2inches.com>
I am pretty confident that this problem is somewhere in the block driver
/ crypto driver combo and am considering digging through the code.
Before I do can anyone point me in the direction pertinent documentation
, specific drivers, etc.?
Dennison Williams wrote:
> Here is the setup: MD software RAID 5 on 4 disks (md0), a LVM logical
> volume (/dev/volume_group/logical_volume) comprised of one physical
> device (/dev/md0), a encryption layer provided by the cryptoloop driver
> (losetup -e aes /dev/loop0 /dev/volume_group/logical_volume), then a
> EXT3 file system (mkfs.ext3 /dev/loop0).
>
> Recently the RAID device kicked out one of the disks during a large file
> transfer. After re-adding the disk to the array whith "mdadm /dev/mdo
> -add /dev/sde (smartctl didn't report
> anything wrong with it, I am not sure why this happened), authenticating
> against the cryptographic layer, then trying to mount the drive, I get
> the following error:
>
> [root@storage redhat]# mount -t ext3 /dev/loop1 /terrorbyte/1/
> mount: wrong fs type, bad option, bad superblock on /dev/loop1,
>
> The message in /var/log/message is:
> VFS: Can't find ext3 filesystem on dev loop1.
>
> I then tried to e2fsck the /dev/loop1 partition with all of the
> different blocks that were reported from:
> mke2fs -n /dev/loop1
> with no luck still.
>
> I don't think that LVM has anything to do with it, because on another
> volume group, that didn't loose any drives, there is a encrypted logical
> volume that has the same problem. Actually all of the drives that I
> have encrypted have this problem now. I am unsure of where the problem
> actually is, and how to go about debugging it. Any suggestions would be
> appreciated.
>
> Sincerely,
> Dennison Williams
> -
> To unsubscribe from this list: send the line "unsubscribe linux-crypto" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
*****************************************************************
* To communicate with me securely, please email me and I will *
* send you my public key. We can then verify each others *
* fingerprints in person, or over the phone. *
* *
* I am open and willing to talk about setting up PGP, the *
* security problems inherent with PGP, and alternatives to PGP *
* for secure electronic communication. *
*****************************************************************
prev parent reply other threads:[~2008-01-07 20:37 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-05 6:47 ext3 filesystem is not recognized after losetup -e aes Dennison Williams
2008-01-06 0:32 ` Dennison Williams
2008-01-07 20:37 ` Dennison Williams [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47828D88.2080903@2inches.com \
--to=evoltech@2inches.com \
--cc=linux-crypto@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.