All of lore.kernel.org
 help / color / mirror / Atom feed
From: Manish Ahuja <ahuja@austin.ibm.com>
To: linuxppc-dev@ozlabs.org
Cc: mahuja@us.ibm.com, linasvepstas@gmail.com, lkessler@us.ibm.com,
	strosake@us.ibm.com
Subject: [PATCH 4/8] pseries: phyp dump: use sysfs to release reserved mem
Date: Mon, 07 Jan 2008 18:21:57 -0600	[thread overview]
Message-ID: <4782C225.3060305@austin.ibm.com> (raw)
In-Reply-To: <4782B985.2090508@austin.ibm.com>


Check to see if there actually is data from a previously
crashed kernel waiting. If so, Allow user-sapce tools to
grab the data (by reading /proc/kcore). When user-space 
finishes dumping a section, it must release that memory
by writing to sysfs. For example,

  echo "0x40000000 0x10000000" > /sys/kernel/release_region

will release 256MB starting at the 1GB.  The released memory
becomes free for general use.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>

------
 arch/powerpc/platforms/pseries/phyp_dump.c |  101 +++++++++++++++++++++++++++--
 1 file changed, 96 insertions(+), 5 deletions(-)

Index: linux-2.6.24-rc3-git1/arch/powerpc/platforms/pseries/phyp_dump.c
===================================================================
--- linux-2.6.24-rc3-git1.orig/arch/powerpc/platforms/pseries/phyp_dump.c	2007-11-21 13:15:05.000000000 -0600
+++ linux-2.6.24-rc3-git1/arch/powerpc/platforms/pseries/phyp_dump.c	2007-11-21 13:24:30.000000000 -0600
@@ -12,17 +12,24 @@
  */
 
 #include <linux/init.h>
+#include <linux/kobject.h>
 #include <linux/mm.h>
+#include <linux/of.h>
 #include <linux/pfn.h>
 #include <linux/swap.h>
+#include <linux/sysfs.h>
 
 #include <asm/page.h>
 #include <asm/phyp_dump.h>
+#include <asm/rtas.h>
 
 /* Global, used to communicate data between early boot and late boot */
 static struct phyp_dump phyp_dump_global;
 struct phyp_dump *phyp_dump_info = &phyp_dump_global;
 
+static int ibm_configure_kernel_dump;
+
+/* ------------------------------------------------- */
 /**
  * release_memory_range -- release memory previously lmb_reserved
  * @start_pfn: starting physical frame number
@@ -52,18 +59,102 @@ release_memory_range(unsigned long start
 	}
 }
 
-static int __init phyp_dump_setup(void)
+/* ------------------------------------------------- */
+/**
+ * sysfs_release_region -- sysfs interface to release memory range.
+ *
+ * Usage:
+ *   "echo <start addr> <length> > /sys/kernel/release_region"
+ *
+ * Example:
+ *   "echo 0x40000000 0x10000000 > /sys/kernel/release_region"
+ *
+ * will release 256MB starting at 1GB.
+ */
+static ssize_t
+store_release_region(struct kset *kset, const char *buf, size_t count)
 {
+	unsigned long start_addr, length, end_addr;
 	unsigned long start_pfn, nr_pages;
+	ssize_t ret;
 
-	/* If no memory was reserved in early boot, there is nothing to do */
-	if (phyp_dump_info->init_reserve_size == 0)
-		return 0;
+	ret = sscanf(buf, "%lx %lx", &start_addr, &length);
+	if (ret != 2)
+		return -EINVAL;
+
+	/* Range-check - don't free any reserved memory that
+	 * wasn't reserved for phyp-dump */
+	if (start_addr < phyp_dump_info->init_reserve_start)
+		start_addr = phyp_dump_info->init_reserve_start;
+
+	end_addr = phyp_dump_info->init_reserve_start +
+			phyp_dump_info->init_reserve_size;
+	if (start_addr+length > end_addr)
+		length = end_addr - start_addr;
+
+	/* Release the region of memory assed in by user */
+	start_pfn = PFN_DOWN(start_addr);
+	nr_pages = PFN_DOWN(length);
+	release_memory_range (start_pfn, nr_pages);
+
+	return count;
+}
+
+static ssize_t
+show_release_region(struct kset * kset, char *buf)
+{
+	return sprintf(buf, "ola\n");
+}
+
+static struct subsys_attribute rr = __ATTR(release_region, 0600,
+					 show_release_region,
+					 store_release_region);
+
+/* ------------------------------------------------- */
+
+static void release_all (void)
+{
+	unsigned long start_pfn, nr_pages;
 
-	/* Release memory that was reserved in early boot */
+	/* Release all memory that was reserved in early boot */
 	start_pfn = PFN_DOWN(phyp_dump_info->init_reserve_start);
 	nr_pages = PFN_DOWN(phyp_dump_info->init_reserve_size);
 	release_memory_range(start_pfn, nr_pages);
+}
+
+static int __init phyp_dump_setup(void)
+{
+	struct device_node *rtas;
+	const int *dump_header;
+	int header_len = 0;
+	int rc;
+
+	/* If no memory was reserved in early boot, there is nothing to do */
+	if (phyp_dump_info->init_reserve_size == 0)
+		return 0;
+
+	/* Return if phyp dump not supported */
+	ibm_configure_kernel_dump = rtas_token("ibm,configure-kernel-dump");
+	if (ibm_configure_kernel_dump == RTAS_UNKNOWN_SERVICE) {
+		release_all();
+		return -ENOSYS;
+	}
+
+	/* Is there dump data waiting for us? */
+	rtas = of_find_node_by_path("/rtas");
+	dump_header = of_get_property(rtas, "ibm,kernel-dump", &header_len);
+	if (dump_header == NULL) {
+		release_all();
+		return 0;
+	}
+
+	/* Should we create a dump_subsys, analogous to s390/ipl.c ? */
+	rc = subsys_create_file(&kernel_subsys, &rr);
+	if (rc) {
+		printk (KERN_ERR "phyp-dump: unable to create sysfs file (%d)\n", rc);
+		release_all();
+		return 0;
+	}
 
 	return 0;
 }

  parent reply	other threads:[~2008-01-08  0:22 UTC|newest]

Thread overview: 64+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-01-07 23:45 [PATCH 0/8] pseries: phyp dump: hypervisor-assisted dump Manish Ahuja
2008-01-08  0:13 ` [PATCH 1/8] pseries: phyp dump: Docmentation Manish Ahuja
2008-01-09  4:29   ` Nathan Lynch
2008-01-09  4:58     ` Michael Ellerman
2008-01-09 15:31     ` Linas Vepstas
2008-01-09 18:44       ` Nathan Lynch
2008-01-09 19:28         ` Manish Ahuja
2008-01-09 22:59         ` Michael Ellerman
2008-01-09 23:18           ` Manish Ahuja
2008-01-10  2:47           ` Linas Vepstas
2008-01-10  3:55             ` Michael Ellerman
2008-01-10  2:33         ` Linas Vepstas
2008-01-10  3:17           ` Olof Johansson
2008-01-10  4:12             ` Linas Vepstas
2008-01-10  4:52               ` Michael Ellerman
2008-01-10 16:21               ` Olof Johansson
2008-01-10 16:34                 ` Linas Vepstas
2008-01-10 21:46                   ` Mike Strosaker
2008-01-11  1:26                     ` Nathan Lynch
2008-01-11 16:57                       ` Linas Vepstas
2008-01-14  5:24                         ` Olof Johansson
2008-01-14 15:21                           ` Linas Vepstas
2008-01-08  0:16 ` [PATCH 2/8] pseries: phyp dump: config file Manish Ahuja
2008-01-08  3:18   ` Stephen Rothwell
2008-01-08  0:21 ` Manish Ahuja [this message]
2008-01-08  3:45   ` [PATCH 4/8] pseries: phyp dump: use sysfs to release reserved mem Stephen Rothwell
2008-01-08 18:34     ` Linas Vepstas
2008-01-08  0:25 ` [PATCH 3/8] pseries: phyp dump: reserve-release proof-of-concept Manish Ahuja
2008-01-08  3:16   ` Stephen Rothwell
2008-01-16  4:21   ` Paul Mackerras
2008-01-08  0:28 ` [PATCH 5/8] pseries: phyp dump: register dump area Manish Ahuja
2008-01-08  3:59   ` Stephen Rothwell
2008-01-08  0:35 ` [PATCH 6/8] pseries: phyp dump: debugging print routines Manish Ahuja
2008-01-08  0:49   ` Arnd Bergmann
2008-01-08  4:03   ` Stephen Rothwell
2008-01-08  0:37 ` [PATCH 7/8] pseries: phyp dump: Unregister and print dump areas Manish Ahuja
2008-01-08  4:25   ` Stephen Rothwell
2008-01-08 22:56     ` Manish Ahuja
2008-01-08  0:39 ` [PATCH 8/8] pseries: phyp dump: Tracking memory range freed Manish Ahuja
2008-02-12  6:31 ` [PATCH 0/8] pseries: phyp dump: hypervisor-assisted dump Manish Ahuja
2008-02-12  6:53   ` [PATCH 1/8] pseries: phyp dump: Docmentation Manish Ahuja
2008-02-12  7:08   ` [PATCH 2/8] pseries: phyp dump: reserve-release proof-of-concept Manish Ahuja
2008-02-12  8:48     ` Michael Ellerman
2008-02-12 16:38       ` Manish Ahuja
2008-02-14  3:46     ` Tony Breeds
2008-02-14 23:12       ` Olof Johansson
2008-02-15  7:16         ` Manish Ahuja
2008-02-12  7:11   ` [PATCH 3/8] pseries: phyp dump: use sysfs to release reserved mem Manish Ahuja
2008-02-12 10:08     ` Stephen Rothwell
2008-02-12 16:40       ` Manish Ahuja
2008-02-15  1:05     ` Tony Breeds
2008-02-15  7:17       ` Manish Ahuja
2008-02-15 22:32         ` Tony Breeds
2008-02-15 17:30       ` Linas Vepstas
2008-02-12  7:14   ` [PATCH 4/8] pseries: phyp dump: register dump area Manish Ahuja
2008-02-12 10:11     ` Stephen Rothwell
2008-02-12 16:31       ` Manish Ahuja
2008-02-12  7:16   ` [PATCH 5/8] pseries: phyp dump: debugging print routines Manish Ahuja
2008-02-12  7:18   ` [PATCH 6/8] pseries: phyp dump: Invalidate and print dump areas Manish Ahuja
2008-02-12 10:18     ` Stephen Rothwell
2008-02-12 16:32       ` Manish Ahuja
2008-02-13 21:43     ` Manish Ahuja
2008-02-12  7:20   ` [PATCH 7/8] pseries: phyp dump: Tracking memory range freed Manish Ahuja
2008-02-12  7:21   ` [PATCH 8/8] pseries: phyp dump: config file Manish Ahuja

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4782C225.3060305@austin.ibm.com \
    --to=ahuja@austin.ibm.com \
    --cc=linasvepstas@gmail.com \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=lkessler@us.ibm.com \
    --cc=mahuja@us.ibm.com \
    --cc=strosake@us.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.