From: Alexander Graf <alex@csgraf.de>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH 7/9] Intel Mac machine
Date: Tue, 08 Jan 2008 16:22:57 +0100 [thread overview]
Message-ID: <47839551.2070804@csgraf.de> (raw)
[-- Attachment #1: Type: text/plain, Size: 240 bytes --]
To leave the default behavior unchanged, this adds a "mac" machine
definition for x86 that automatically chooses the right hardware for an
emulated Intel Mac.
As x86 did not really know about models, the also adds a simple model
interface.
[-- Attachment #2: qemu-intelmac.patch --]
[-- Type: text/x-patch, Size: 8982 bytes --]
Index: qemu-snapshot-2008-01-08_05/hw/boards.h
===================================================================
--- qemu-snapshot-2008-01-08_05.orig/hw/boards.h
+++ qemu-snapshot-2008-01-08_05/hw/boards.h
@@ -23,6 +23,7 @@ int qemu_register_machine(QEMUMachine *m
extern QEMUMachine bareetraxfs_machine;
/* pc.c */
+extern QEMUMachine mac_machine;
extern QEMUMachine pc_machine;
extern QEMUMachine isapc_machine;
Index: qemu-snapshot-2008-01-08_05/hw/pc.c
===================================================================
--- qemu-snapshot-2008-01-08_05.orig/hw/pc.c
+++ qemu-snapshot-2008-01-08_05/hw/pc.c
@@ -57,6 +57,12 @@ static PITState *pit;
static IOAPICState *ioapic;
static PCIDevice *i440fx_state;
+enum pc_model {
+ MODEL_ISA = 0,
+ MODEL_PCI = 1,
+ MODEL_MAC = 2
+};
+
static void ioport80_write(void *opaque, uint32_t addr, uint32_t data)
{
}
@@ -708,7 +714,7 @@ static void pc_init1(int ram_size, int v
const char *boot_device, DisplayState *ds,
const char *kernel_filename, const char *kernel_cmdline,
const char *initrd_filename,
- int pci_enabled, const char *cpu_model)
+ int model, const char *cpu_model)
{
char buf[1024];
int ret, linux_boot, i;
@@ -730,11 +736,15 @@ static void pc_init1(int ram_size, int v
/* init CPUs */
if (cpu_model == NULL) {
+ if(model == MODEL_MAC) {
+ cpu_model = "coreduo";
+ } else {
#ifdef TARGET_X86_64
- cpu_model = "qemu64";
+ cpu_model = "qemu64";
#else
- cpu_model = "qemu32";
+ cpu_model = "qemu32";
#endif
+ }
}
for(i = 0; i < smp_cpus; i++) {
@@ -751,7 +761,7 @@ static void pc_init1(int ram_size, int v
}
register_savevm("cpu", i, 4, cpu_save, cpu_load, env);
qemu_register_reset(main_cpu_reset, env);
- if (pci_enabled) {
+ if (model > MODEL_ISA) {
apic_init(env);
}
vmport_init(env);
@@ -888,7 +898,7 @@ static void pc_init1(int ram_size, int v
i8259 = i8259_init(cpu_irq[0]);
ferr_irq = i8259[13];
- if (pci_enabled) {
+ if (model > MODEL_ISA) {
pci_bus = i440fx_init(&i440fx_state, i8259);
piix3_devfn = piix3_init(pci_bus, -1);
} else {
@@ -901,7 +911,7 @@ static void pc_init1(int ram_size, int v
register_ioport_write(0xf0, 1, 1, ioportF0_write, NULL);
if (cirrus_vga_enabled) {
- if (pci_enabled) {
+ if (model > MODEL_ISA) {
pci_cirrus_vga_init(pci_bus,
ds, phys_ram_base + vga_ram_addr,
vga_ram_addr, vga_ram_size);
@@ -910,13 +920,13 @@ static void pc_init1(int ram_size, int v
vga_ram_addr, vga_ram_size);
}
} else if (vmsvga_enabled) {
- if (pci_enabled)
+ if (model > MODEL_ISA)
pci_vmsvga_init(pci_bus, ds, phys_ram_base + ram_size,
ram_size, vga_ram_size);
else
fprintf(stderr, "%s: vmware_vga: no PCI bus\n", __FUNCTION__);
} else {
- if (pci_enabled) {
+ if (model > MODEL_ISA) {
pci_vga_init(pci_bus, ds, phys_ram_base + vga_ram_addr,
vga_ram_addr, vga_ram_size, 0, 0);
} else {
@@ -930,12 +940,18 @@ static void pc_init1(int ram_size, int v
register_ioport_read(0x92, 1, 1, ioport92_read, NULL);
register_ioport_write(0x92, 1, 1, ioport92_write, NULL);
- if (pci_enabled) {
- ioapic = ioapic_init();
+
+ switch(model) {
+ case MODEL_MAC:
+ applesmc_init();
+ lpc_init(pci_bus, piix3_devfn, i8259);
+ case MODEL_PCI:
+ ioapic = ioapic_init();
+ break;
}
pit = pit_init(0x40, i8259[0]);
pcspk_init(pit);
- if (pci_enabled) {
+ if (model > MODEL_ISA) {
pic_set_alt_irq_func(isa_pic, ioapic_set_irq, ioapic);
}
@@ -955,15 +971,21 @@ static void pc_init1(int ram_size, int v
for(i = 0; i < nb_nics; i++) {
nd = &nd_table[i];
if (!nd->model) {
- if (pci_enabled) {
- nd->model = "ne2k_pci";
- } else {
- nd->model = "ne2k_isa";
+ switch(model) {
+ case MODEL_ISA:
+ nd->model = "ne2k_isa";
+ break;
+ case MODEL_MAC:
+ nd->model = "rtl8139";
+ break;
+ default:
+ nd->model = "ne2k_pci";
+ break;
}
}
if (strcmp(nd->model, "ne2k_isa") == 0) {
pc_init_ne2k_isa(nd, i8259);
- } else if (pci_enabled) {
+ } else if (model > MODEL_ISA) {
if (strcmp(nd->model, "?") == 0)
fprintf(stderr, "qemu: Supported ISA NICs: ne2k_isa\n");
pci_nic_init(pci_bus, nd, -1);
@@ -989,19 +1011,25 @@ static void pc_init1(int ram_size, int v
hd[i] = NULL;
}
- if (pci_enabled) {
- pci_piix3_ide_init(pci_bus, hd, piix3_devfn + 1, i8259);
- } else {
- for(i = 0; i < MAX_IDE_BUS; i++) {
- isa_ide_init(ide_iobase[i], ide_iobase2[i], i8259[ide_irq[i]],
- hd[MAX_IDE_DEVS * i], hd[MAX_IDE_DEVS * i + 1]);
- }
+ switch(model) {
+ case MODEL_MAC:
+ pci_ich6_ide_init(pci_bus, hd, piix3_devfn + 1, i8259);
+ break;
+ case MODEL_PCI:
+ pci_piix3_ide_init(pci_bus, hd, piix3_devfn + 1, i8259);
+ break;
+ default:
+ for(i = 0; i < 2; i++) {
+ isa_ide_init(ide_iobase[i], ide_iobase2[i], i8259[ide_irq[i]],
+ hd[MAX_IDE_DEVS * i], hd[MAX_IDE_DEVS * i + 1]);
+ }
+ break;
}
i8042_init(i8259[1], i8259[12], 0x60);
DMA_init(0);
#ifdef HAS_AUDIO
- audio_init(pci_enabled ? pci_bus : NULL, i8259);
+ audio_init((model > MODEL_ISA) ? pci_bus : NULL, i8259);
#endif
for(i = 0; i < MAX_FD; i++) {
@@ -1015,11 +1043,11 @@ static void pc_init1(int ram_size, int v
cmos_init(ram_size, boot_device, hd);
- if (pci_enabled && usb_enabled) {
+ if ((model > MODEL_ISA) && usb_enabled) {
usb_uhci_piix3_init(pci_bus, piix3_devfn + 2);
}
- if (pci_enabled && acpi_enabled) {
+ if ((model > MODEL_ISA) && acpi_enabled) {
uint8_t *eeprom_buf = qemu_mallocz(8 * 256); /* XXX: make this persistent */
i2c_bus *smbus;
@@ -1034,7 +1062,7 @@ static void pc_init1(int ram_size, int v
i440fx_init_memory_mappings(i440fx_state);
}
- if (pci_enabled) {
+ if (model > MODEL_ISA) {
int max_bus;
int bus, unit;
void *scsi;
@@ -1053,6 +1081,18 @@ static void pc_init1(int ram_size, int v
}
}
+static void pc_init_mac(int ram_size, int vga_ram_size,
+ const char *boot_device, DisplayState *ds,
+ const char *kernel_filename,
+ const char *kernel_cmdline,
+ const char *initrd_filename,
+ const char *cpu_model)
+{
+ pc_init1(ram_size, vga_ram_size, boot_device, ds,
+ kernel_filename, kernel_cmdline,
+ initrd_filename, MODEL_MAC, cpu_model);
+}
+
static void pc_init_pci(int ram_size, int vga_ram_size,
const char *boot_device, DisplayState *ds,
const char *kernel_filename,
@@ -1062,7 +1102,7 @@ static void pc_init_pci(int ram_size, in
{
pc_init1(ram_size, vga_ram_size, boot_device, ds,
kernel_filename, kernel_cmdline,
- initrd_filename, 1, cpu_model);
+ initrd_filename, MODEL_PCI, cpu_model);
}
static void pc_init_isa(int ram_size, int vga_ram_size,
@@ -1074,7 +1114,7 @@ static void pc_init_isa(int ram_size, in
{
pc_init1(ram_size, vga_ram_size, boot_device, ds,
kernel_filename, kernel_cmdline,
- initrd_filename, 0, cpu_model);
+ initrd_filename, MODEL_ISA, cpu_model);
}
QEMUMachine pc_machine = {
@@ -1083,6 +1123,12 @@ QEMUMachine pc_machine = {
pc_init_pci,
};
+QEMUMachine mac_machine = {
+ "mac",
+ "Intel-Mac",
+ pc_init_mac,
+};
+
QEMUMachine isapc_machine = {
"isapc",
"ISA-only PC",
Index: qemu-snapshot-2008-01-08_05/vl.c
===================================================================
--- qemu-snapshot-2008-01-08_05.orig/vl.c
+++ qemu-snapshot-2008-01-08_05/vl.c
@@ -7881,6 +7881,7 @@ static void register_machines(void)
{
#if defined(TARGET_I386)
qemu_register_machine(&pc_machine);
+ qemu_register_machine(&mac_machine);
qemu_register_machine(&isapc_machine);
#elif defined(TARGET_PPC)
qemu_register_machine(&heathrow_machine);
reply other threads:[~2008-01-08 15:11 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47839551.2070804@csgraf.de \
--to=alex@csgraf.de \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.