From: Harald Dunkel <harald.dunkel@t-online.de>
To: Takashi Iwai <tiwai@suse.de>
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.6.24-rc7, intel audio: alsa doesn't say a beep
Date: Wed, 09 Jan 2008 07:03:18 +0100 [thread overview]
Message-ID: <478463A6.2070106@t-online.de> (raw)
In-Reply-To: <s5h63y42oy6.wl%tiwai@suse.de>
Takashi Iwai wrote:
>
> Did you enable CONFIG_SND_HDA_POWER_SAVE feature? And which hardware
> (laptop, product name, whatever) exactly?
>
CONFIG_SND_HDA_POWER_SAVE is not set.
Hardware is a Dell XPS M1330. CPU is Core2 Duo T7500, 2.20GHz,
2 GByte RAM. lspci:
00:00.0 Host bridge: Intel Corporation Mobile Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PCI Express Root Port (rev 0c)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation Mobile LPC Interface Controller (rev 02)
00:1f.1 IDE interface: Intel Corporation Mobile IDE Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation Mobile SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation Unknown device 0427 (rev a1)
03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd Unknown device 0832 (rev 05)
03:01.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
09:00.0 Ethernet controller: Broadcom Corporation Unknown device 1713 (rev 02)
0c:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
> Also, please show the contents of /proc/asound/card0/codec#* files.
> Do you see difference in these files between with and without the
> patch?
>
See below. There is no difference between both.
Regards
Harri
========================================================================
Codec: SigmaTel STAC9228
Address: 0
Vendor Id: 0x83847616
Subsystem Id: 0x10280209
Revision Id: 0x100201
No Modem Function Group found
Default PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: ofs=0x00, nsteps=0x0e, stepsize=0x05, mute=0
Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1
Node 0x02 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x7f 0x7f]
Power: 0x0
Node 0x03 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0xff 0xff]
Power: 0x0
Node 0x04 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0xff 0xff]
Power: 0x0
Node 0x05 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0xff 0xff]
Power: 0x0
Node 0x06 [Vendor Defined Widget] wcaps 0xfd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0xff 0xff]
Power: 0x0
Node 0x07 [Audio Input] wcaps 0x1d0541: Stereo
Power: 0x0
Connection: 1
0x1b
Node 0x08 [Audio Input] wcaps 0x1d0541: Stereo
Power: 0x0
Connection: 1
0x1c
Node 0x09 [Audio Input] wcaps 0x1d0541: Stereo
Power: 0x0
Connection: 1
0x1d
Node 0x0a [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x08173f: IN OUT HP Detect
Pin Default 0x02214020: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Green
Pin-ctls: 0xc0: OUT HP
Connection: 2
0x02* 0x03
Node 0x0b [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x08173f: IN OUT HP Detect
Pin Default 0x02a19080: [Jack] Mic at Ext Front
Conn = 1/8, Color = Pink
Pin-ctls: 0x24: IN
Connection: 2
0x02 0x03*
Node 0x0c [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x081737: IN OUT Detect
Pin Default 0x0181304e: [Jack] Line In at Ext Rear
Conn = 1/8, Color = Blue
Pin-ctls: 0x20: IN
Connection: 1
0x03
Node 0x0d [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x08173f: IN OUT HP Detect
Pin Default 0x01014010: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
Pin-ctls: 0x40: OUT
Connection: 1
0x02
Node 0x0e [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x081737: IN OUT Detect
Pin Default 0x01a19040: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
Pin-ctls: 0x24: IN
Connection: 1
0x04
Node 0x0f [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x081737: IN OUT Detect
Pin Default 0x01011012: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x40: OUT
Connection: 1
0x05
Node 0x10 [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0837: IN OUT Detect
Pin Default 0x01016011: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Orange
Pin-ctls: 0x40: OUT
Connection: 1
0x04
Node 0x11 [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0837: IN OUT Detect
Pin Default 0x40000100: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x00:
Connection: 1
0x03
Node 0x12 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x40000100: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x00:
Node 0x13 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x40000100: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x00:
Node 0x14 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x40000100: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x00:
Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 9
0x0e 0x12 0x0f 0x0b* 0x0c 0x0d 0x0a 0x10 0x11
Node 0x16 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 9
0x0e* 0x12 0x0f 0x0b 0x0c 0x0d 0x0a 0x10 0x11
Node 0x17 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 9
0x0e* 0x12 0x0f 0x0b 0x0c 0x0d 0x0a 0x10 0x11
Node 0x18 [Audio Selector] wcaps 0x300103: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Connection: 1
0x15
Node 0x19 [Audio Selector] wcaps 0x300103: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Connection: 1
0x16
Node 0x1a [Audio Selector] wcaps 0x300103: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Connection: 1
0x17
Node 0x1b [Audio Selector] wcaps 0x30090d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 3
0x18* 0x13 0x14
Node 0x1c [Audio Selector] wcaps 0x30090d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 3
0x19* 0x13 0x14
Node 0x1d [Audio Selector] wcaps 0x30090d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 3
0x1a* 0x13 0x14
Node 0x1e [Audio Output] wcaps 0x40211: Stereo Digital
PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Node 0x1f [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital
Node 0x20 [Audio Input] wcaps 0x140311: Stereo Digital
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Connection: 1
0x22
Node 0x21 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x01442070: [Jack] SPDIF Out at Ext Rear
Conn = RCA, Color = Grey
Pin-ctls: 0x40: OUT
Connection: 5
0x1e* 0x1f 0x1b 0x1c 0x1d
Node 0x22 [Pin Complex] wcaps 0x430681: Stereo Digital
Pincap 0x0810024: IN EAPD Detect
Pin Default 0x40000100: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x00:
Power: 0x0
Node 0x23 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=0
Amp-Out vals: [0x00]
Node 0x24 [Volume Knob Widget] wcaps 0x600000: Mono
next prev parent reply other threads:[~2008-01-09 6:03 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-07 19:53 2.6.24-rc7, intel audio: alsa doesn't say a beep Harald Dunkel
2008-01-08 7:24 ` Takashi Iwai
2008-01-08 10:10 ` Ingo Molnar
2008-01-08 17:01 ` Harald Dunkel
2008-01-08 17:43 ` Takashi Iwai
2008-01-09 6:03 ` Harald Dunkel [this message]
2008-01-09 7:31 ` Takashi Iwai
2008-01-09 20:10 ` Harald Dunkel
2008-01-10 13:30 ` Takashi Iwai
2008-01-10 22:02 ` Harald Dunkel
2008-01-11 6:49 ` Takashi Iwai
2008-01-11 21:55 ` Harald Dunkel
2008-01-13 11:17 ` Takashi Iwai
2008-01-14 20:46 ` Harald Dunkel
2008-01-15 10:07 ` Takashi Iwai
2008-01-12 9:41 ` Harald Dunkel
2008-01-12 17:11 ` Daniel Hazelton
2008-01-14 11:04 ` Takashi Iwai
2008-01-14 21:03 ` Daniel Hazelton
2008-01-15 10:08 ` Takashi Iwai
2008-01-15 19:00 ` Daniel Hazelton
2008-01-13 11:26 ` Takashi Iwai
2008-01-16 6:53 ` Harald Dunkel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=478463A6.2070106@t-online.de \
--to=harald.dunkel@t-online.de \
--cc=linux-kernel@vger.kernel.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.