Re: [PATCH 2/5] Warp Base Platform - dts

[Sean MacLennan <smaclennan@pikatech.com>]

Josh Boyer wrote:
> On Fri, 11 Jan 2008 01:15:48 -0500
> Sean MacLennan <smaclennan@pikatech.com> wrote:
> This looks pretty darn good, minus the missing GPIO node (see comment
> in patch 1).
>   
Thanks. I have added the gpio and tested it.

Cheers,
   Sean

Signed-off-by: Sean MacLennan <smaclennan@pikatech.com>
---
--- /dev/null	2005-11-20 22:22:37.000000000 -0500
+++ arch/powerpc/boot/dts/warp.dts	2008-01-11 15:58:03.000000000 -0500
@@ -0,0 +1,234 @@
+/*
+ * Device Tree Source for PIKA Warp
+ *
+ * Copyright (c) 2008 PIKA Technologies
+ *   Sean MacLennan <smaclennan@pikatech.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "pika,warp";
+	compatible = "pika,warp";
+	dcr-parent = <&/cpus/cpu@0>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		serial0 = &UART0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,440EP";
+			reg = <0>;
+			clock-frequency = <0>; /* Filled in by zImage */
+			timebase-frequency = <0>; /* Filled in by zImage */
+			i-cache-line-size = <20>;
+			d-cache-line-size = <20>;
+			i-cache-size = <8000>;
+			d-cache-size = <8000>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0 0>; /* Filled in by zImage */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-440ep","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0c0 009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-440ep","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0d0 009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-440ep";
+		dcr-reg = <00e 002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-440ep";
+		dcr-reg = <00c 002>;
+	};
+
+	plb {
+		compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by zImage */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
+			dcr-reg = <010 2>;
+		};
+
+		DMA0: dma {
+			compatible = "ibm,dma-440ep", "ibm,dma-440gp";
+			dcr-reg = <100 027>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
+			dcr-reg = <180 62>;
+			num-tx-chans = <4>;
+			num-rx-chans = <2>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0 1 2 3 4>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
+					/*RXEOB*/ 1 &UIC0 b 4
+					/*SERR*/  2 &UIC1 0 4
+					/*TXDE*/  3 &UIC1 1 4
+					/*RXDE*/  4 &UIC1 2 4>;
+		};
+
+		POB0: opb {
+		  	compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		  	ranges = <00000000 0 00000000 80000000
+			          80000000 0 80000000 80000000>;
+		  	interrupt-parent = <&UIC1>;
+		  	interrupts = <7 4>;
+		  	clock-frequency = <0>; /* Filled in by zImage */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
+				dcr-reg = <012 2>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				interrupts = <5 1>;
+				interrupt-parent = <&UIC1>;
+
+				fpga@2,0 {
+					compatible = "pika,fpga";
+			   		reg = <2 0 2200>;
+					interrupts = <18 8>;
+					interrupt-parent = <&UIC0>;
+				};
+
+				nor_flash@0,0 {
+					compatible = "amd,s29gl512n", "cfi-flash";
+					bank-width = <2>;
+					reg = <0 0 4000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0 180000>;
+					};
+					partition@180000 {
+						label = "root";
+						reg = <180000 3480000>;
+					};
+					partition@3600000 {
+						label = "user";
+						reg = <3600000 900000>;
+					};
+					partition@3f00000 {
+						label = "fpga";
+						reg = <3f00000 40000>;
+					};
+					partition@3f40000 {
+						label = "env";
+						reg = <3f40000 40000>;
+					};
+					partition@3f80000 {
+						label = "u-boot";
+						reg = <3f80000 80000>;
+					};
+				};
+			};
+
+			UART0: serial@ef600300 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <ef600300 8>;
+		   		virtual-reg = <ef600300>;
+		   		clock-frequency = <0>; /* Filled in by zImage */
+		   		current-speed = <1c200>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <0 4>;
+	   		};
+
+			IIC0: i2c@ef600700 {
+				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
+				reg = <ef600700 14>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <2 4>;
+			};
+
+			GPIO0: gpio@ef600b00 {
+				compatible = "ibm,gpio-440ep";
+				reg = <ef600b00 148>;
+			};
+
+			ZMII0: emac-zmii@ef600d00 {
+				compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
+				reg = <ef600d00 c>;
+			};
+
+			EMAC0: ethernet@ef600e00 {
+				linux,network-index = <0>;
+				device_type = "network";
+				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
+				interrupt-parent = <&UIC1>;
+				interrupts = <1c 4 1d 4>;
+				reg = <ef600e00 70>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0 1>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <5dc>;
+				rx-fifo-size = <1000>;
+				tx-fifo-size = <800>;
+				phy-mode = "rmii";
+				phy-map = <00000000>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <0>;
+			};
+
+			usb@ef601000 {
+				compatible = "ohci-be";
+				reg = <ef601000 80>;
+				interrupts = <8 1 9 1>;
+				interrupt-parent = < &UIC1 >;
+			};
+		};
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@ef600300";
+	};
+};