Re: [Bugme-new] [Bug 9721] New: wake on lan fails with sky2 module

[supersud501 <supersud501@yahoo.de>]

Andrew Morton wrote:
> 
> So simply reverting this:
> 
> commit ac93a3946b676025fa55356180e8321639744b31
> Author: Stephen Hemminger <shemminger@linux-foundation.org>
> Date:   Mon Nov 5 15:52:08 2007 -0800
> 
>     sky2: enable PCI config writes
>     
>     On some boards, PCI configuration space access is turned off by default.
>     The 2.6.24 driver doesn't turn it on, and should have.
>     
>     Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
>     Signed-off-by: Jeff Garzik <jeff@garzik.org>
> 
> diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
> index c27c7d6..4f41a94 100644
> --- a/drivers/net/sky2.c
> +++ b/drivers/net/sky2.c
> @@ -2791,6 +2791,9 @@ static void sky2_reset(struct sky2_hw *hw)
>  	sky2_write8(hw, B0_CTST, CS_RST_SET);
>  	sky2_write8(hw, B0_CTST, CS_RST_CLR);
>  
> +	/* allow writes to PCI config */
> +	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
> +
>  	/* clear PCI errors, if any */
>  	pci_read_config_word(pdev, PCI_STATUS, &status);
>  	status |= PCI_STATUS_ERROR_BITS;
> 
> fixes this regression?
> 
> If so, we should revert that change.
> 


yes, it does.


>> but i noticed another "bug" on 2.6.24-rc7-git with sky2: dmesg shows a 
>> lot of lines every 5 seconds:
>>
>> [...]
>> [  357.400462] sky2 0000:02:00.0: error interrupt status=0xc0000000
>> [  362.442039] printk: 41 messages suppressed.
>> [  362.442043] sky2 0000:02:00.0: error interrupt status=0x80000000
>> [  367.439151] printk: 18 messages suppressed.
>> [  367.439156] sky2 0000:02:00.0: error interrupt status=0x80000000
>> [  372.436267] printk: 30 messages suppressed.
>> [  372.436271] sky2 0000:02:00.0: error interrupt status=0x80000000
>> [  377.350236] printk: 19 messages suppressed.
>> [...]
>>
>> since i do not notice any errors (yet) i'll wait till next rc, maybe it 
>> will be gone then...
> 
> That's not good.  is this new behaviour?
> 
> 

at least on 2.6.23.12 i doesn't happen, so it's now for me in 
2.6.24-rc7-git4 (but again, not testet in earlier versions of 2.6.24).

since i do not feel any sideeffects yet after using it for ~6 hours 
(besides a really long dmesg-output), it's just a little bit annoying.

if there's a way to identify the source of the problem besides of 
bisecting, just say so and i will take a look into it the next days. if 
bisecting is the only (time-consuming) way you have to wait at least 
until the next weekend :)