From: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
To: Ingo Molnar <mingo@elte.hu>
Cc: tglx@linutronix.de, hpa@zytor.com, linux-kernel@vger.kernel.org
Subject: [PATCH] x86: move warning message of polling idle and HT enabled
Date: Mon, 14 Jan 2008 18:03:33 -0800 [thread overview]
Message-ID: <478C1475.7060706@ct.jp.nec.com> (raw)
In-Reply-To: <20080114190904.GA2288@elte.hu>
From: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Subject: [PATCH] x86: move warning message of polling idle and HT enabled
This warning at idle_setup() is never shown because smp_num_sibling hasn't
been updated at this point yet.
Move this polling idle and HT enabled warning message to select_idle_routine().
I also implement this warning on 64-bit kernel and make select_idle_routine()
call after detect_ht() call.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
---
Ingo, this patch needs Andi's patch;
i386: Move MWAIT idle check to generic CPU
http://lkml.org/lkml/2008/1/2/358
I haven't found it in x86.git tree.
arch/x86/kernel/process_32.c | 18 ++++++++++++------
arch/x86/kernel/process_64.c | 17 ++++++++++++-----
arch/x86/kernel/setup_64.c | 3 ++-
3 files changed, 26 insertions(+), 12 deletions(-)
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 69a69c3..d52c032 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -287,17 +287,27 @@ static void mwait_idle(void)
void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c)
{
+ static int selected;
+
+ if (selected)
+ return;
+#ifdef CONFIG_X86_SMP
+ if (pm_idle == poll_idle && smp_num_siblings > 1) {
+ printk(KERN_WARNING "WARNING: polling idle and HT enabled,"
+ " performance may degrade.\n");
+ }
+#endif
if (cpu_has(c, X86_FEATURE_MWAIT)) {
- printk("monitor/mwait feature present.\n");
/*
* Skip, if setup has overridden idle.
* One CPU supports mwait => All CPUs supports mwait
*/
if (!pm_idle) {
- printk("using mwait in idle threads.\n");
+ printk(KERN_INFO "using mwait in idle threads.\n");
pm_idle = mwait_idle;
}
}
+ selected = 1;
}
static int __init idle_setup(char *str)
@@ -305,10 +315,6 @@ static int __init idle_setup(char *str)
if (!strcmp(str, "poll")) {
printk("using polling idle threads.\n");
pm_idle = poll_idle;
-#ifdef CONFIG_X86_SMP
- if (smp_num_siblings > 1)
- printk("WARNING: polling idle and HT enabled, performance may degrade.\n");
-#endif
} else if (!strcmp(str, "mwait"))
force_mwait = 1;
else
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 5e12edd..8cff606 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -282,20 +282,27 @@ static void mwait_idle(void)
void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c)
{
- static int printed;
+ static int selected;
+
+ if (selected)
+ return;
+#ifdef CONFIG_X86_SMP
+ if (pm_idle == poll_idle && smp_num_siblings > 1) {
+ printk(KERN_WARNING "WARNING: polling idle and HT enabled,"
+ " performance may degrade.\n");
+ }
+#endif
if (cpu_has(c, X86_FEATURE_MWAIT)) {
/*
* Skip, if setup has overridden idle.
* One CPU supports mwait => All CPUs supports mwait
*/
if (!pm_idle) {
- if (!printed) {
- printk(KERN_INFO "using mwait in idle threads.\n");
- printed = 1;
- }
+ printk(KERN_INFO "using mwait in idle threads.\n");
pm_idle = mwait_idle;
}
}
+ selected = 1;
}
static int __init idle_setup(char *str)
diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c
index c8dcdd2..8ebf990 100644
--- a/arch/x86/kernel/setup_64.c
+++ b/arch/x86/kernel/setup_64.c
@@ -1067,7 +1067,6 @@ void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
break;
}
- select_idle_routine(c);
detect_ht(c);
/*
@@ -1085,6 +1084,8 @@ void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
#ifdef CONFIG_X86_MCE
mcheck_init(c);
#endif
+ select_idle_routine(c);
+
if (c != &boot_cpu_data)
mtrr_ap_init();
#ifdef CONFIG_NUMA
--
1.5.3.6
next prev parent reply other threads:[~2008-01-15 2:03 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-14 19:04 [PATCH] x86_32: remove warning message not used Hiroshi Shimamoto
2008-01-14 19:09 ` Ingo Molnar
2008-01-14 19:19 ` Hiroshi Shimamoto
2008-01-15 2:03 ` Hiroshi Shimamoto [this message]
2008-01-15 13:26 ` [PATCH] x86: move warning message of polling idle and HT enabled Ingo Molnar
2008-01-15 17:53 ` Hiroshi Shimamoto
2008-01-15 18:56 ` [PATCH 0/2] x86: move warning message of polling idle and HT enabled, take 3 Hiroshi Shimamoto
2008-01-15 18:59 ` [PATCH 1/2] x86: move warning message of polling idle and HT enabled Hiroshi Shimamoto
2008-01-18 12:56 ` Ingo Molnar
2008-01-15 19:01 ` [PATCH 2/2] x86_64: move select_idle_routine() call after detect_ht() Hiroshi Shimamoto
2008-01-18 12:56 ` Ingo Molnar
2008-01-18 2:52 ` x86: kdump failure Hiroshi Shimamoto
2008-01-18 9:02 ` Ingo Molnar
2008-01-18 9:29 ` Subrata Modak
2008-01-19 0:01 ` Roland McGrath
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=478C1475.7060706@ct.jp.nec.com \
--to=h-shimamoto@ct.jp.nec.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.