All of lore.kernel.org
 help / color / mirror / Atom feed
From: Badalian Vyacheslav <slavon@bigtelecom.ru>
To: David Miller <davem@davemloft.net>
Cc: elendil@planet.nl, netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [REGRESSION] 2.6.24-rc7: e1000: Detected Tx Unit Hang
Date: Wed, 16 Jan 2008 12:02:28 +0300	[thread overview]
Message-ID: <478DC824.4030600@bigtelecom.ru> (raw)
In-Reply-To: <20080114.215317.38045859.davem@davemloft.net>

applied to 2.6.24-rc7-git2
Have messages
Also have regression after apply patch.
System may do above 800mbs traffic before patch. After its "exit polling 
mode?" (4 CPU, 1 cpu get 100% si (process ksoftirqd/0), 3 CPU is IDLE)
After patch system was go to "exit polling mode" at above 600mbs.

Thanks.

> From: Frans Pop <elendil@planet.nl>
> Date: Tue, 15 Jan 2008 06:25:10 +0100
>
>   
>> kernel: e1000: eth0: e1000_clean_tx_irq: Detected Tx Unit Hang
>>     
>
> Does this make the problem go away?
>
> (Note this isn't the final correct patch we should apply.  There
>  is no reason why this revert back to the older ->poll() logic
>  here should have any effect on the TX hang triggering...)
>
> diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
> index 13d57b0..cada32c 100644
> --- a/drivers/net/e1000/e1000_main.c
> +++ b/drivers/net/e1000/e1000_main.c
> @@ -3919,7 +3919,7 @@ e1000_clean(struct napi_struct *napi, int budget)
>  {
>  	struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi);
>  	struct net_device *poll_dev = adapter->netdev;
> -	int work_done = 0;
> +	int tx_work = 0, work_done = 0;
>  
>  	/* Must NOT use netdev_priv macro here. */
>  	adapter = poll_dev->priv;
> @@ -3929,8 +3929,8 @@ e1000_clean(struct napi_struct *napi, int budget)
>  	 * simultaneously.  A failure obtaining the lock means
>  	 * tx_ring[0] is currently being cleaned anyway. */
>  	if (spin_trylock(&adapter->tx_queue_lock)) {
> -		e1000_clean_tx_irq(adapter,
> -				   &adapter->tx_ring[0]);
> +		tx_work = e1000_clean_tx_irq(adapter,
> +					     &adapter->tx_ring[0]);
>  		spin_unlock(&adapter->tx_queue_lock);
>  	}
>  
> @@ -3938,7 +3938,7 @@ e1000_clean(struct napi_struct *napi, int budget)
>  	                  &work_done, budget);
>  
>  	/* If budget not fully consumed, exit the polling mode */
> -	if (work_done < budget) {
> +	if (!tx_work && (work_done < budget)) {
>  		if (likely(adapter->itr_setting & 3))
>  			e1000_set_itr(adapter);
>  		netif_rx_complete(poll_dev, napi);
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
>   


  parent reply	other threads:[~2008-01-16  9:02 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-01-15  5:25 [REGRESSION] 2.6.24-rc7: e1000: Detected Tx Unit Hang Frans Pop
2008-01-15  5:53 ` David Miller
2008-01-15  6:17   ` Frans Pop
2008-01-15 14:04   ` Frans Pop
2008-01-15 16:04     ` slavon
2008-01-15 21:53       ` Brandeburg, Jesse
2008-01-16  5:02         ` David Miller
2008-01-16  8:56           ` Frans Pop
2008-01-16 10:29             ` David Miller
2008-01-16 17:07               ` Robert Olsson
2008-01-18 12:11                 ` David Miller
2008-01-18 13:00                   ` Robert Olsson
2008-01-18 13:37                     ` David Miller
2008-01-20  9:20                       ` Brandeburg, Jesse
2008-01-20  9:28                         ` Andrey Rahmatullin
2008-01-21 13:27                   ` Robert Olsson
2008-01-21 13:29                     ` David Miller
2008-01-17  7:09           ` Brandeburg, Jesse
2008-01-17  7:20             ` David Miller
2008-01-17  7:51               ` Frans Pop
2008-01-17  8:00                 ` David Miller
2008-01-17  9:40                   ` Arnaldo Carvalho de Melo
2008-01-17  9:45                     ` David Miller
2008-01-16  9:02   ` Badalian Vyacheslav [this message]
2008-01-16 12:25     ` David Miller
2008-01-16 12:28     ` David Miller
2008-01-21  6:54       ` Badalian Vyacheslav

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=478DC824.4030600@bigtelecom.ru \
    --to=slavon@bigtelecom.ru \
    --cc=davem@davemloft.net \
    --cc=elendil@planet.nl \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.