From mboxrd@z Thu Jan 1 00:00:00 1970 From: rgheck Subject: Re: ATA, SATA Disk Problems Date: Mon, 21 Jan 2008 11:15:00 -0500 Message-ID: <4794C504.7010000@bobjweil.com> References: <478E24EE.2060409@brown.edu> <47945394.7090100@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from qmta10.westchester.pa.mail.comcast.net ([76.96.62.17]:53880 "EHLO QMTA10.westchester.pa.mail.comcast.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758237AbYAUQPD (ORCPT ); Mon, 21 Jan 2008 11:15:03 -0500 In-Reply-To: <47945394.7090100@gmail.com> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Tejun Heo Cc: rgheck , linux-ide@vger.kernel.org Full boot log below. This is the critical part, as far as boot is concerned: ata7: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001fc00 irq 14 ata7.00: ATAPI: PLEXTOR CD-R PX-W1610A, 1.05, max MWDMA2 ata7.00: configured for MWDMA2 ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata7.00: BMDMA stat 0x65 ata7.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x5a data 128 in res 59/44:03:00:3c:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation) ata7: soft resetting port ata7.00: configured for MWDMA2 ata7: EH complete ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata7.00: BMDMA stat 0x65 ata7.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x5a data 128 in res 59/44:03:00:3c:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation) ata7: soft resetting port ata7.00: configured for MWDMA2 ata7: EH complete ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata7.00: BMDMA stat 0x65 ata7.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x5a data 128 in res 59/44:03:00:3c:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation) ata7: soft resetting port ata7.00: configured for MWDMA2 ata7: EH complete ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata7.00: BMDMA stat 0x65 ata7.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x5a data 128 in res 59/44:03:00:3c:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation) ata7: soft resetting port ata7.00: configured for MWDMA2 ata7: EH complete The sorts of errors I get when using the drive I've posted before. They're intermittent and so can be hard to capture, but I can try to post them again, too. Richard > rgheck wrote: > >> Hi, and sorry if this turns out to be a known issue. Actually, I'll be >> thrilled if this turns out to be a known issue. But I've searched on it >> forever, and although I've found some information, I've not found a >> definite fix. Possibly my fault, but this is driving me nuts. >> >> System: Asus P5N32E MB, Intel Quad Core; on SATA: two HDs, SATA Pioneer >> DVD-RW; on PATA: Plextor CDRW, one HD. (Can send more info of course.) >> Kernel is 2.6.23.9 on Fedora 8. >> [root@rghquad lyxsvn]# lsmod | grep ata >> pata_amd 20293 2 >> pata_pdc2027x 17477 0 >> sata_nv 25157 6 >> ata_generic 14405 0 >> libata 114673 4 pata_amd,pata_pdc2027x,sata_nv,ata_generic >> scsi_mod 145657 5 sr_mod,sg,usb_storage,libata,sd_mod >> >> The issue concerns locks ups and other errors that seem to be focused on >> the optical drives. I'm getting this kind of error: >> Jan 16 01:33:19 rghquad kernel: ata7.01: exception Emask 0x0 SAct 0x0 >> SErr 0x0 action 0x2 frozen >> Jan 16 01:33:19 rghquad kernel: ata7.01: cmd >> a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 >> Jan 16 01:33:19 rghquad kernel: ata7: soft resetting port >> Jan 16 01:33:19 rghquad kernel: ata7.01: configured for MWDMA2 >> Jan 16 01:33:19 rghquad kernel: ata7: EH complete >> repeatedly, sometimes with the Plextor, sometimes with the Pioneer. But >> then things sometimes get worse: >> Jan 16 01:36:22 rghquad kernel: sr1: CDROM (ioctl) error, command: >> <6>ata7: EH complete >> Jan 16 01:36:22 rghquad kernel: __journal_remove_journal_head: freeing >> b_committed_data >> Jan 16 01:36:22 rghquad kernel: __journal_remove_journal_head: freeing >> b_frozen_data >> Jan 16 01:36:22 rghquad kernel: __journal_remove_journal_head: freeing >> b_committed_data >> and it seems as if the whole ATA system locks up. The main drive gets >> reset to read-only, and, well, things are not then good. >> >> The fact that this sometimes happens on SATA and sometimes on PATA >> suggests its not a cable issue. (That particular case was the Plextor.) >> >> Is it worth trying a larger PS? I believe I have 450W in this system. >> >> Any help or suggestions more than welcome. >> > > * Please post full kernel log including boot messages and error messages. > > * If you have an extra power supply lying around, connecting some of > SATA devices to a separate PSU (don't do it for PATA) and seeing whether > the problem continues and on which devices is a great way to rule out > power problem. You can power up a PSU without connecting it to a system > by... > > http://modtown.co.uk/mt/article2.php?id=psumod > > Linux version 2.6.23.9-85.fc8 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Fri Dec 7 15:49:36 EST 2007 Command line: ro root=LABEL=/ rhgb quiet pnpacpi=off pci=nomsi,nommconf BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cfef0000 (usable) BIOS-e820: 00000000cfef0000 - 00000000cfef3000 (ACPI NVS) BIOS-e820: 00000000cfef3000 - 00000000cff00000 (ACPI data) BIOS-e820: 00000000f0000000 - 00000000f2000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000130000000 (usable) Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 851696) 1 entries of 3200 used Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used end_pfn_map = 1245184 DMI 2.4 present. ACPI: RSDP 000F7B00, 0024 (r2 Nvidia) ACPI: XSDT CFEF30C0, 0044 (r1 Nvidia ASUSACPI 42302E31 AWRD 0) ACPI: FACP CFEFB640, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD 0) ACPI: DSDT CFEF3240, 83B0 (r1 NVIDIA AWRDACPI 1000 MSFT 3000000) ACPI: FACS CFEF0000, 0040 ACPI: HPET CFEFB880, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD 98) ACPI: MCFG CFEFB900, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) ACPI: APIC CFEFB780, 0098 (r1 Nvidia ASUSACPI 42302E31 AWRD 0) No NUMA configuration found Faking a node at 0000000000000000-0000000130000000 Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 851696) 1 entries of 3200 used Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used Bootmem setup node 0 0000000000000000-0000000130000000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1245184 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0 -> 159 0: 256 -> 851696 0: 1048576 -> 1245184 On node 0 totalpages: 1048207 DMA zone: 56 pages used for memmap DMA zone: 1319 pages reserved DMA zone: 2624 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 833320 pages, LIFO batch:31 Normal zone: 2688 pages used for memmap Normal zone: 193920 pages, LIFO batch:31 Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) Processor #2 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) Processor #3 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Setting APIC routing to flat ACPI: HPET id: 0x10de8201 base: 0xfeff0000 Using ACPI (MADT) for SMP configuration information swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 swsusp: Registered nosave memory region: 00000000cfef0000 - 00000000cfef3000 swsusp: Registered nosave memory region: 00000000cfef3000 - 00000000cff00000 swsusp: Registered nosave memory region: 00000000cff00000 - 00000000f0000000 swsusp: Registered nosave memory region: 00000000f0000000 - 00000000f2000000 swsusp: Registered nosave memory region: 00000000f2000000 - 00000000fec00000 swsusp: Registered nosave memory region: 00000000fec00000 - 0000000100000000 Allocating PCI resources starting at d0000000 (gap: cff00000:20100000) SMP: Allowing 4 CPUs, 0 hotplug CPUs PERCPU: Allocating 41688 bytes of per cpu data Built 1 zonelists in Node order. Total pages: 1029864 Policy zone: Normal Kernel command line: ro root=LABEL=/ rhgb quiet pnpacpi=off pci=nomsi,nommconf Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 hpet clockevent registered TSC calibrated against HPET time.c: Detected 2399.978 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing software IO TLB between 0x4866000 - 0x8866000 Memory: 4060600k/4980736k available (2442k kernel code, 132228k reserved, 1381k data, 324k init) SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1 Calibrating delay using timer specific routine.. 4802.86 BogoMIPS (lpj=2401430) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 0/0 -> Node 0 using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM1) SMP alternatives: switching to UP code ACPI: Core revision 20070126 Using local APIC timer interrupts. APIC timer calibration result 16666516 Detected 16.666 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/4 APIC 0x2 Initializing CPU#1 Calibrating delay using timer specific routine.. 4799.89 BogoMIPS (lpj=2399949) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 1/2 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 CPU1: Thermal monitoring enabled (TM1) Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#1]: passed. SMP alternatives: switching to SMP code Booting processor 2/4 APIC 0x1 Initializing CPU#2 Calibrating delay using timer specific routine.. 4799.85 BogoMIPS (lpj=2399927) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 2/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU2: Thermal monitoring enabled (TM1) Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#2]: passed. SMP alternatives: switching to SMP code Booting processor 3/4 APIC 0x3 Initializing CPU#3 Calibrating delay using timer specific routine.. 4799.90 BogoMIPS (lpj=2399950) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 3/3 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 CPU3: Thermal monitoring enabled (TM1) Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#3]: passed. Brought up 4 CPUs sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=208 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=2080 bytes Time: 9:58:47 Date: 01/21/08 NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: Using configuration type 1 mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Transparent bridge - 0000:00:0f.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 5 *7 9 10 11 14 15) ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0 ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0 Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 hpet0: 3 32-bit timers, 25000000 Hz Time: tsc clocksource has been installed. PCI: Bridge: 0000:00:03.0 IO window: d000-dfff MEM window: ea000000-edffffff PREFETCH window: d0000000-dfffffff PCI: Bridge: 0000:00:06.0 IO window: b000-bfff MEM window: efc00000-efcfffff PREFETCH window: ef900000-ef9fffff PCI: Bridge: 0000:00:07.0 IO window: a000-afff MEM window: efe00000-efefffff PREFETCH window: efd00000-efdfffff PCI: Bridge: 0000:00:0f.0 IO window: c000-cfff MEM window: efb00000-efbfffff PREFETCH window: efa00000-efafffff PCI: Bridge: 0000:00:13.0 IO window: 9000-9fff MEM window: ef800000-ef8fffff PREFETCH window: ef700000-ef7fffff PCI: Bridge: 0000:00:14.0 IO window: 8000-8fff MEM window: ef600000-ef6fffff PREFETCH window: ef500000-ef5fffff PCI: Bridge: 0000:00:15.0 IO window: 7000-7fff MEM window: ef400000-ef4fffff PREFETCH window: ef300000-ef3fffff PCI: Bridge: 0000:00:16.0 IO window: 6000-6fff MEM window: ef200000-ef2fffff PREFETCH window: ef100000-ef1fffff PCI: Bridge: 0000:00:17.0 IO window: 5000-5fff MEM window: ef000000-ef0fffff PREFETCH window: eef00000-eeffffff PCI: Bridge: 0000:00:18.0 IO window: 4000-4fff MEM window: eee00000-eeefffff PREFETCH window: eed00000-eedfffff PCI: Setting latency timer of device 0000:00:03.0 to 64 PCI: Setting latency timer of device 0000:00:06.0 to 64 PCI: Setting latency timer of device 0000:00:07.0 to 64 PCI: Setting latency timer of device 0000:00:0f.0 to 64 PCI: Setting latency timer of device 0000:00:13.0 to 64 PCI: Setting latency timer of device 0000:00:14.0 to 64 PCI: Setting latency timer of device 0000:00:15.0 to 64 PCI: Setting latency timer of device 0000:00:16.0 to 64 PCI: Setting latency timer of device 0000:00:17.0 to 64 PCI: Setting latency timer of device 0000:00:18.0 to 64 NET: Registered protocol family 2 Switched to high resolution mode on CPU 2 Switched to high resolution mode on CPU 3 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 12582912 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 3225k freed audit: initializing netlink socket (disabled) audit(1200909526.715:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key EFFF415CECD83B98 - User ID: Red Hat, Inc. (Kernel Module GPG key) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:01:00.0 PCI: Setting latency timer of device 0000:00:03.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.0:pcie00] PCI: Setting latency timer of device 0000:00:06.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:06.0:pcie00] PCI: Setting latency timer of device 0000:00:07.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:07.0:pcie00] PCI: Setting latency timer of device 0000:00:13.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:13.0:pcie00] PCI: Setting latency timer of device 0000:00:14.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:14.0:pcie00] PCI: Setting latency timer of device 0000:00:15.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:15.0:pcie00] PCI: Setting latency timer of device 0000:00:16.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:16.0:pcie00] PCI: Setting latency timer of device 0000:00:17.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:17.0:pcie00] PCI: Setting latency timer of device 0000:00:18.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:18.0:pcie00] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Fan [FAN] (on) ACPI: Thermal Zone [THRM] (40 C) Real Time Clock Driver v1.12ac hpet_resources: 0xfeff0000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.102 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Magic number: 8:940:980 Freeing unused kernel memory: 324k freed Write protecting the kernel read-only data: 1020k ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:0b.1 to 64 ehci_hcd 0000:00:0b.1: EHCI Host Controller ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0b.1: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:0b.1 ehci_hcd 0000:00:0b.1: irq 23, io mem 0xefffe000 ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:0b.0 to 64 ohci_hcd 0000:00:0b.0: OHCI Host Controller ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:0b.0: irq 22, io mem 0xeffff000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected USB Universal Host Controller Interface driver v3.0 SCSI subsystem initialized libata version 2.21 loaded. sata_nv 0000:00:0e.0: version 3.5 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:0e.0 to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0x00000000000109f0 ctl 0x0000000000010bf2 bmdma 0x000000000001f700 irq 21 ata2: SATA max UDMA/133 cmd 0x0000000000010970 ctl 0x0000000000010b72 bmdma 0x000000000001f708 irq 21 usb 1-4: new high speed USB device using ehci_hcd and address 3 usb 1-4: configuration #1 chosen from 1 choice hub 1-4:1.0: USB hub found hub 1-4:1.0: 4 ports detected ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: WDC WD1500AHFD-00RAR5, 21.07QR5, max UDMA/133 ata1.00: 293046768 sectors, multi 1: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 usb 1-5: new high speed USB device using ehci_hcd and address 4 usb 1-5: configuration #1 chosen from 1 choice ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-8: WDC WD5000AAKS-00YGA0, 12.01C02, max UDMA/133 ata2.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 0/32) ata2.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA WDC WD1500AHFD-0 21.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 293046768 512-byte hardware sectors (150040 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 293046768 512-byte hardware sectors (150040 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 > sd 0:0:0:0: [sda] Attached SCSI disk scsi 1:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb:<6>usb 2-1: new low speed USB device using ohci_hcd and address 2 sdb1 sdb2 sd 1:0:0:0: [sdb] Attached SCSI disk ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:0e.1[B] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:0e.1 to 64 scsi2 : sata_nv scsi3 : sata_nv ata3: SATA max UDMA/133 cmd 0x00000000000109e0 ctl 0x0000000000010be2 bmdma 0x000000000001f200 irq 20 ata4: SATA max UDMA/133 cmd 0x0000000000010960 ctl 0x0000000000010b62 bmdma 0x000000000001f208 irq 20 usb 2-1: configuration #1 chosen from 1 choice input: Logitech USB Receiver as /class/input/input1 input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:0b.0-1 Fixing up Logitech keyboard report descriptor input: Logitech USB Receiver as /class/input/input2 input,hiddev96: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:0b.0-1 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:0e.2[C] -> Link [ASA2] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:0e.2 to 64 scsi4 : sata_nv scsi5 : sata_nv ata5: SATA max UDMA/133 cmd 0x000000000001f100 ctl 0x000000000001f002 bmdma 0x000000000001ed00 irq 23 ata6: SATA max UDMA/133 cmd 0x000000000001ef00 ctl 0x000000000001ee02 bmdma 0x000000000001ed08 irq 23 ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata6.00: ATAPI: PIONEER DVD-RW DVR-212D, 1.21, max UDMA/66 ata6.00: configured for UDMA/66 scsi 5:0:0:0: CD-ROM PIONEER DVD-RW DVR-212D 1.21 PQ: 0 ANSI: 5 pata_amd 0000:00:0d.0: version 0.3.9 PCI: Setting latency timer of device 0000:00:0d.0 to 64 scsi6 : pata_amd scsi7 : pata_amd ata7: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001fc00 irq 14 ata8: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001fc08 irq 15 ata7.00: ATAPI: PLEXTOR CD-R PX-W1610A, 1.05, max MWDMA2 ata7.00: configured for MWDMA2 ata8: port disabled. ignoring. scsi 6:0:0:0: CD-ROM PLEXTOR CD-R PX-W1610A 1.05 PQ: 0 ANSI: 5 Initializing USB Mass Storage driver... scsi8 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device scan complete scsi 8:0:0:0: Direct-Access USB2.0 SM/XD PQ: 0 ANSI: 0 CCS scsi 8:0:0:1: Direct-Access USB2.0 CF/MD PQ: 0 ANSI: 0 CCS scsi 8:0:0:2: Direct-Access USB2.0 SD/MMC PQ: 0 ANSI: 0 CCS scsi 8:0:0:3: Direct-Access USB2.0 MS/MSPRO PQ: 0 ANSI: 0 CCS sd 8:0:0:0: [sdc] Attached SCSI removable disk sd 8:0:0:1: [sdd] Attached SCSI removable disk sd 8:0:0:2: [sde] Attached SCSI removable disk sd 8:0:0:3: [sdf] Attached SCSI removable disk kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks audit(1200909546.140:2): selinux=0 auid=4294967295 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 scsi 5:0:0:0: Attached scsi generic sg2 type 5 scsi 6:0:0:0: Attached scsi generic sg3 type 5 sd 8:0:0:0: Attached scsi generic sg4 type 0 sd 8:0:0:1: Attached scsi generic sg5 type 0 sd 8:0:0:2: Attached scsi generic sg6 type 0 sd 8:0:0:3: Attached scsi generic sg7 type 0 sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 5:0:0:0: Attached scsi CD-ROM sr0 forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:11.0 to 64 forcedeth: using HIGHDMA input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input4 ACPI: Power Button (CM) [PWRB] input: PC Speaker as /class/input/input5 eth0: forcedeth.c: subsystem: 01043:cb84 bound to 0000:00:11.0 ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [AMC1] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:12.0 to 64 forcedeth: using HIGHDMA eth1: forcedeth.c: subsystem: 01043:cb84 bound to 0000:00:12.0 i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c80 ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:0f.1[B] -> Link [AAZA] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:0f.1 to 64 hda_codec: Unknown model for AD1988, trying auto-probe from BIOS... ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:01:00.0 to 64 ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 ACPI: PCI Interrupt 0000:04:0b.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19 firewire_ohci: Added fw-ohci device 0000:04:0b.0, OHCI version 1.10 firewire_core: created new fw device fw0 (0 config rom retries, S400) ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata7.00: BMDMA stat 0x65 ata7.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x5a data 128 in res 59/44:03:00:3c:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation) ata7: soft resetting port ata7.00: configured for MWDMA2 ata7: EH complete ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata7.00: BMDMA stat 0x65 ata7.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x5a data 128 in res 59/44:03:00:3c:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation) ata7: soft resetting port ata7.00: configured for MWDMA2 ata7: EH complete ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata7.00: BMDMA stat 0x65 ata7.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x5a data 128 in res 59/44:03:00:3c:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation) ata7: soft resetting port ata7.00: configured for MWDMA2 ata7: EH complete ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata7.00: BMDMA stat 0x65 ata7.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x5a data 128 in res 59/44:03:00:3c:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation) ata7: soft resetting port ata7.00: configured for MWDMA2 ata7: EH complete sr1: scsi-1 drive sr 6:0:0:0: Attached scsi CD-ROM sr1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded EXT3 FS on sda2, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sdb1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sdb2, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 8289500k swap on /dev/sda8. Priority:-1 extents:1 across:8289500k