All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rick Measham <rick@measham.id.au>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org
Subject: Re: 1.0.16rc1 release -- error: 'system_utsname' undeclared
Date: Fri, 25 Jan 2008 08:12:06 +1100	[thread overview]
Message-ID: <4798FF26.40803@measham.id.au> (raw)
In-Reply-To: <s5hd4rr4ar8.wl%tiwai@suse.de>


[-- Attachment #1.1: Type: text/plain, Size: 1603 bytes --]

Takashi Iwai wrote:
> It is surely on the current HG repo.  You must be using an older
> repo.  Try hg.alsa-project.org instead of hg-mirror.

That fixed it. I grabbed the latest alsa-driver and it didn't need the 
patch. It all built just fine and installed without errors.

However it didn't fix the speakers so I'm no further ahead that 0.15 or 
0.14 (input and output jacks work, but the internal speakers don't)

dmesg tells me there are zero speaker_outs. So I figure it didn't 
auto-detect them, and there are no pins specified for this exact setup.

# dmesg
[128924.764000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, 
low) -> IRQ 21
[128924.764000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[128924.796000] ALSA /usr/src/alsa/alsa-driver/pci/hda/hda_codec.c:2855: 
autoconfig: line_outs=4 (0xd/0xc/0xf/0xb/0x0)
[128924.796000] ALSA /usr/src/alsa/alsa-driver/pci/hda/hda_codec.c:2859: 
    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[128924.796000] ALSA /usr/src/alsa/alsa-driver/pci/hda/hda_codec.c:2863: 
    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[128924.796000] ALSA /usr/src/alsa/alsa-driver/pci/hda/hda_codec.c:2871: 
    inputs: mic=0xe, fmic=0x10, line=0x0, fline=0x0, cd=0x0, aux=0x0
[128924.796000] ALSA 
/usr/src/alsa/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:2172: 
dac_nids=4 (0x2/0x3/0x5/0x4/0x0)

My full setup (as output by alsa-info.sh) can be seen at 
http://pastebin.ca/871257

If there isn't an 'obvious' fix, I'm most happy to spend the time doing 
whatever to get it working if you can point me in the right direction.

Cheers!
Rick Measham

[-- Attachment #1.2: S/MIME Cryptographic Signature --]
[-- Type: application/x-pkcs7-signature, Size: 3241 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

  reply	other threads:[~2008-01-24 21:12 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-01-22 11:49 1.0.16rc1 release Jaroslav Kysela
2008-01-22 16:23 ` James Pearson
2008-01-22 16:50   ` Takashi Iwai
2008-01-22 17:15     ` James Pearson
2008-01-22 17:20       ` Takashi Iwai
2008-01-22 17:39         ` James Pearson
2008-01-22 17:56           ` Tobin Davis
2008-01-22 19:25 ` 1.0.16rc1 release -- error: ‘system_utsname’ undeclared Rick Measham
2008-01-23  7:03   ` Takashi Iwai
2008-01-23  7:31     ` Takashi Iwai
2008-01-24 12:14       ` Rick Measham
2008-01-24 13:24         ` Takashi Iwai
2008-01-24 21:12           ` Rick Measham [this message]
2008-01-25  8:03             ` 1.0.16rc1 release -- error: 'system_utsname' undeclared Takashi Iwai
     [not found]               ` <4799CC9B.9050809@measham.id.au>
2008-01-25 12:10                 ` Takashi Iwai
2008-01-25 13:33                   ` Rick Measham
2008-01-25 13:48                     ` Takashi Iwai
2008-01-25 13:51                       ` Rick Measham
2008-01-25 14:19                         ` Takashi Iwai
  -- strict thread matches above, loose matches on Subject: below --
2008-01-24 10:40 1.0.16rc1 release -- error: ‘system_utsname’ undeclared Brad Milne
2008-01-24 10:58 ` Takashi Iwai
2008-01-24 11:18   ` Brad Milne
2008-01-24 11:23     ` Takashi Iwai
     [not found]       ` <20ddc5da0801240330k39359a00id920cb4d20115a9b@mail.gmail.com>
2008-01-24 11:36         ` Takashi Iwai
2008-01-24 11:52           ` Brad Milne

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4798FF26.40803@measham.id.au \
    --to=rick@measham.id.au \
    --cc=alsa-devel@alsa-project.org \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.