From: Thomas Evans <evans02472@gmail.com>
To: Tejun Heo <htejun@gmail.com>,
IDE/ATA development list <linux-ide@vger.kernel.org>,
Jay.Estabrook@hp.com
Cc: evans02472@gmail.com
Subject: Re: sata_sil24 / Alpha / 4726 PMP issue ..
Date: Fri, 25 Jan 2008 12:28:40 -0500 [thread overview]
Message-ID: <479A1C48.1070209@gmail.com> (raw)
In-Reply-To: <47997BD3.2060100@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 347 bytes --]
added some more printk's based on what I saw -
maybe some issue with the dma port?
...tom
Thomas Evans wrote:
> Tejun (and all) -
>
> I've attached a log from my machine marked up with a few extra printk's.
> I did add the ssleep() you suggested off line - made no difference.
>
> I'll be happy to add more prinks in places that I did not ...
[-- Attachment #2: dmesg-alpha-tpe2 --]
[-- Type: text/plain, Size: 22235 bytes --]
kobject sata_sil24: registering. parent: <NULL>, set: module
kobject holders: registering. parent: sata_sil24, set: <NULL>
kobject_uevent_env
kobject filter function caused the event to drop!
kobject_uevent_env
fill_kobj_path: path = '/module/sata_sil24'
kobject notes: registering. parent: sata_sil24, set: <NULL>
kobject_uevent_env
kobject filter function caused the event to drop!
bus pci: add driver sata_sil24
kobject sata_sil24: registering. parent: <NULL>, set: drivers
kobject_uevent_env
fill_kobj_path: path = '/bus/pci/drivers/sata_sil24'
pci: Matched Device 0000:00:07.0 with Driver sata_sil24
pci: Probing driver sata_sil24 with device 0000:00:07.0
sata_sil24 0000:00:07.0: version 1.1
sata_sil24 0000:00:07.0: init_one ->pcim_enable_device
sata_sil24 0000:00:07.0: init_one ->pcim_iomap_regions
sata_sil24 0000:00:07.0: init_one ->pcim_iomap_regions
sata_sil24 0000:00:07.0: init_one -> IRQ-loss PCI-X Errata.
sata_sil24 0000:00:07.0: readl(iomap[SIL24_HOST_BAR] + HOST_CTRL) = 0110000F
sata_sil24 0000:00:07.0: Clearing completion IRQ loss on PCI-X errata fix
sata_sil24 0000:00:07.0: init_one -> allocate and fill host
ata4294967295: init_one
ata4294967295: init_one
ata4294967295: init_one
ata4294967295: init_one
sata_sil24 0000:00:07.0: init_one -> setting 64 bit DMA
sata_sil24 0000:00:07.0: init_one -> sil24_init_controller
ata4294967295: sil24_config_port - STD WOC
ata4294967295: sil24_config_port - STD WOC
ata4294967295: sil24_config_port - STD WOC
ata4294967295: sil24_config_port - STD WOC
sata_sil24 0000:00:07.0: init_one -> setting master
PCI: Enabling bus mastering for device 0000:00:07.0
sata_sil24 0000:00:07.0: init_one -> ata_host_activate
scsi54 : sata_sil24
DEV: registering device: ID = 'host54'
kobject host54: registering. parent: 0000:00:07.0, set: devices
kobject_uevent_env
kobject filter function caused the event to drop!
CLASS: registering class device: ID = 'host54'
kobject host54: registering. parent: scsi_host, set: class_obj
kobject_uevent_env
fill_kobj_path: path = '/class/scsi_host/host54'
class_uevent - name = host54
fill_kobj_path: path = '/devices/pci0000:00/0000:00:07.0/host54'
scsi55 : sata_sil24
DEV: registering device: ID = 'host55'
kobject host55: registering. parent: 0000:00:07.0, set: devices
kobject_uevent_env
kobject filter function caused the event to drop!
CLASS: registering class device: ID = 'host55'
kobject host55: registering. parent: scsi_host, set: class_obj
kobject_uevent_env
fill_kobj_path: path = '/class/scsi_host/host55'
class_uevent - name = host55
fill_kobj_path: path = '/devices/pci0000:00/0000:00:07.0/host55'
scsi56 : sata_sil24
DEV: registering device: ID = 'host56'
kobject host56: registering. parent: 0000:00:07.0, set: devices
kobject_uevent_env
kobject filter function caused the event to drop!
CLASS: registering class device: ID = 'host56'
kobject host56: registering. parent: scsi_host, set: class_obj
kobject_uevent_env
fill_kobj_path: path = '/class/scsi_host/host56'
class_uevent - name = host56
fill_kobj_path: path = '/devices/pci0000:00/0000:00:07.0/host56'
scsi57 : sata_sil24
DEV: registering device: ID = 'host57'
kobject host57: registering. parent: 0000:00:07.0, set: devices
kobject_uevent_env
kobject filter function caused the event to drop!
CLASS: registering class device: ID = 'host57'
kobject host57: registering. parent: scsi_host, set: class_obj
kobject_uevent_env
fill_kobj_path: path = '/class/scsi_host/host57'
class_uevent - name = host57
fill_kobj_path: path = '/devices/pci0000:00/0000:00:07.0/host57'
ata5: SATA max UDMA/100 host m128@0x9aa9000 port 0x9aa0000 irq 31
ata6: SATA max UDMA/100 host m128@0x9aa9000 port 0x9aa2000 irq 31
ata7: SATA max UDMA/100 host m128@0x9aa9000 port 0x9aa4000 irq 31
ata8: SATA max UDMA/100 host m128@0x9aa9000 port 0x9aa6000 irq 31
ata5: sil24_init_port - no PMP?
ata5: ata_eh_recover - 1
ata5: ata_eh_recover - 2 re-enable link?
ata5.00: ata_eh_recover - 3
ata5.00: ata_eh_recover - 5
ata5.00: ata_eh_recover - 6
ata5.00: ata_eh_recover -> ata_dev_init 7
ata_eh_recover - 8 - retry
ata5: ata_eh_recover - 8a prep for EH
ata5: ata_eh_recover - reset
ata5: ata_eh_recover - ATA_DEV_UNKNOWN
ata_eh_recover - 9 - reset is true
ata_eh_recover -> freezing port -> nr_pmp_links == 0
ata5: ata_eh_recover -> ata_eh_reset
ata5: hard resetting link
ata5: hardreset - 1!
ata5: hardreset - 2!
ata5: hardreset - 3!
ata5: hardreset - 4!
ata5: hardreset - 4a!
ata5: hardreset - 5!
ata5: hardreset - 6!
ata5: hardreset - 7 - ret -EAGAIN!
ata5: PHYS - something is attached.
ata5: sil24_init_port - no PMP?
ata5: sil24_exec_polled_cmd irq_enabled = 00000000
ata5: sil24_exec_polled_cmd paddr HI:00000000 LO:81A00000
ata5: sil24_exec_polled_cmd irq_stat = 00B60000
ata5: sil24_exec_polled_cmd cleared IRQs
ata5: sil24_exec_polled_cmd forcing port into known state.
ata5: sil24_init_port - no PMP?
ata5: sil24_exec_polled_cmd sil24_init_port = -EIO (port IRQ error)
ata5: softreset failed (SRST command error) (-5)
ata5: reset failed (errno=-5), retrying in 7 secs
ata5: hard resetting link
ata5: hardreset - 1!
ata5: hardreset - 2!
ata5: hardreset - 3!
ata5: hardreset - 4!
ata5: hardreset - 4a!
ata5: hardreset - 5!
ata5: hardreset - 6!
ata5: hardreset - 7 - ret -EAGAIN!
ata5: PHYS - something is attached.
ata5: sil24_init_port - no PMP?
ata5: sil24_exec_polled_cmd irq_enabled = 00000000
ata5: sil24_exec_polled_cmd paddr HI:00000000 LO:81A00000
ata5: sil24_exec_polled_cmd irq_stat = 00B60000
ata5: sil24_exec_polled_cmd cleared IRQs
ata5: sil24_exec_polled_cmd forcing port into known state.
ata5: sil24_init_port - no PMP?
ata5: sil24_exec_polled_cmd sil24_init_port = -EIO (port IRQ error)
ata5: softreset failed (SRST command error) (-5)
ata5: reset failed (errno=-5), retrying in 7 secs
ata5: hard resetting link
ata5: hardreset - 1!
ata5: hardreset - 2!
ata5: hardreset - 3!
ata5: hardreset - 4!
ata5: hardreset - 4a!
ata5: hardreset - 5!
ata5: hardreset - 6!
ata5: hardreset - 7 - ret -EAGAIN!
ata5: PHYS - something is attached.
ata5: sil24_init_port - no PMP?
ata5: sil24_exec_polled_cmd irq_enabled = 00000000
ata5: sil24_exec_polled_cmd paddr HI:00000000 LO:81A00000
ata5: sil24_exec_polled_cmd irq_stat = 00B60000
ata5: sil24_exec_polled_cmd cleared IRQs
ata5: sil24_exec_polled_cmd forcing port into known state.
ata5: sil24_init_port - no PMP?
ata5: sil24_exec_polled_cmd sil24_init_port = -EIO (port IRQ error)
ata5: softreset failed (SRST command error) (-5)
ata5: reset failed (errno=-5), retrying in 32 secs
ata5: hard resetting link
ata5: hardreset - 1!
ata5: hardreset - 2!
ata5: hardreset - 3!
ata5: hardreset - 4!
ata5: hardreset - 4a!
ata5: hardreset - 5!
ata5: hardreset - 6!
ata5: hardreset - 7 - ret -EAGAIN!
ata5: PHYS - something is attached.
ata5: sil24_init_port - no PMP?
ata5: sil24_exec_polled_cmd irq_enabled = 00000000
ata5: sil24_exec_polled_cmd paddr HI:00000000 LO:81A00000
ata5: sil24_exec_polled_cmd irq_stat = 00B60000
ata5: sil24_exec_polled_cmd cleared IRQs
ata5: sil24_exec_polled_cmd forcing port into known state.
ata5: sil24_init_port - no PMP?
ata5: sil24_exec_polled_cmd sil24_init_port = -EIO (port IRQ error)
ata5: softreset failed (SRST command error) (-5)
ata5: reset failed, giving up
ata6: sil24_init_port - no PMP?
ata6: ata_eh_recover - 1
ata6: ata_eh_recover - 2 re-enable link?
ata6.00: ata_eh_recover - 3
ata6.00: ata_eh_recover - 5
ata6.00: ata_eh_recover - 6
ata6.00: ata_eh_recover -> ata_dev_init 7
ata_eh_recover - 8 - retry
ata6: ata_eh_recover - 8a prep for EH
ata6: ata_eh_recover - reset
ata6: ata_eh_recover - ATA_DEV_UNKNOWN
ata_eh_recover - 9 - reset is true
ata_eh_recover -> freezing port -> nr_pmp_links == 0
ata6: ata_eh_recover -> ata_eh_reset
ata6: hard resetting link
ata6: hardreset - 1!
ata6: hardreset - 2!
ata6: hardreset - 3!
ata6: hardreset - 4!
ata6: hardreset - 4a!
ata6: hardreset - 5!
ata6: hardreset - 6!
ata6: hardreset - 7 - ret -EAGAIN!
ata6: PHYS - no device
ata6: SATA link down (SStatus 0 SControl 0)
ata6: ata_eh_recover -> thawing
ata6: ata_eh_recover -> revalidate_and_attach
ata_eh_recover -> link okay?!
ata7: sil24_init_port - no PMP?
ata7: ata_eh_recover - 1
ata7: ata_eh_recover - 2 re-enable link?
ata7.00: ata_eh_recover - 3
ata7.00: ata_eh_recover - 5
ata7.00: ata_eh_recover - 6
ata7.00: ata_eh_recover -> ata_dev_init 7
ata_eh_recover - 8 - retry
ata7: ata_eh_recover - 8a prep for EH
ata7: ata_eh_recover - reset
ata7: ata_eh_recover - ATA_DEV_UNKNOWN
ata_eh_recover - 9 - reset is true
ata_eh_recover -> freezing port -> nr_pmp_links == 0
ata7: ata_eh_recover -> ata_eh_reset
ata7: hard resetting link
ata7: hardreset - 1!
ata7: hardreset - 2!
ata7: hardreset - 3!
ata7: hardreset - 4!
ata7: hardreset - 4a!
ata7: hardreset - 5!
ata7: hardreset - 6!
ata7: hardreset - 7 - ret -EAGAIN!
ata7: PHYS - no device
ata7: SATA link down (SStatus 0 SControl 0)
ata7: ata_eh_recover -> thawing
ata7: ata_eh_recover -> revalidate_and_attach
ata_eh_recover -> link okay?!
ata8: sil24_init_port - no PMP?
ata8: ata_eh_recover - 1
ata8: ata_eh_recover - 2 re-enable link?
ata8.00: ata_eh_recover - 3
ata8.00: ata_eh_recover - 5
ata8.00: ata_eh_recover - 6
ata8.00: ata_eh_recover -> ata_dev_init 7
ata_eh_recover - 8 - retry
ata8: ata_eh_recover - 8a prep for EH
ata8: ata_eh_recover - reset
ata8: ata_eh_recover - ATA_DEV_UNKNOWN
ata_eh_recover - 9 - reset is true
ata_eh_recover -> freezing port -> nr_pmp_links == 0
ata8: ata_eh_recover -> ata_eh_reset
ata8: hard resetting link
ata8: hardreset - 1!
ata8: hardreset - 2!
ata8: hardreset - 3!
ata8: hardreset - 4!
ata8: hardreset - 4a!
ata8: hardreset - 5!
ata8: hardreset - 6!
ata8: hardreset - 7 - ret -EAGAIN!
ata8: PHYS - no device
ata8: SATA link down (SStatus 0 SControl 0)
ata8: ata_eh_recover -> thawing
ata8: ata_eh_recover -> revalidate_and_attach
ata_eh_recover -> link okay?!
bound device '0000:00:07.0' to driver 'sata_sil24'
pci: Bound Device 0000:00:07.0 to Driver sata_sil24
kobject drivers: registering. parent: sata_sil24, set: <NULL>
kobject_uevent_env
kobject filter function caused the event to drop!
ata5: sil24_init_port - no PMP?
ata5: ata_eh_recover - 1
ata5: ata_eh_recover - 2 re-enable link?
ata5.00: ata_eh_recover - 3
ata5.00: ata_eh_recover - 5
ata_eh_recover - 8 - retry
ata5: ata_eh_recover - 8a prep for EH
ata5: ata_eh_recover - no reset
ata5: ata_eh_recover - ATA_DEV_UNKNOWN
ata6: sil24_init_port - no PMP?
ata6: ata_eh_recover - 1
ata6: ata_eh_recover - 2 re-enable link?
ata6.00: ata_eh_recover - 3
ata6.00: ata_eh_recover - 5
ata_eh_recover - 8 - retry
ata6: ata_eh_recover - 8a prep for EH
ata6: ata_eh_recover - no reset
ata6: ata_eh_recover - ATA_DEV_UNKNOWN
ata6: ata_eh_recover -> revalidate_and_attach
ata6: attemping to enable power management!
ata_eh_recover -> link okay?!
ata7: sil24_init_port - no PMP?
ata7: ata_eh_recover - 1
ata7: ata_eh_recover - 2 re-enable link?
ata7.00: ata_eh_recover - 3
ata7.00: ata_eh_recover - 5
ata_eh_recover - 8 - retry
ata7: ata_eh_recover - 8a prep for EH
ata7: ata_eh_recover - no reset
ata7: ata_eh_recover - ATA_DEV_UNKNOWN
ata7: ata_eh_recover -> revalidate_and_attach
ata7: attemping to enable power management!
ata_eh_recover -> link okay?!
ata8: sil24_init_port - no PMP?
ata8: ata_eh_recover - 1
ata8: ata_eh_recover - 2 re-enable link?
ata8.00: ata_eh_recover - 3
ata8.00: ata_eh_recover - 5
ata_eh_recover - 8 - retry
ata8: ata_eh_recover - 8a prep for EH
ata8: ata_eh_recover - no reset
ata8: ata_eh_recover - ATA_DEV_UNKNOWN
ata8: ata_eh_recover -> revalidate_and_attach
ata8: attemping to enable power management!
ata_eh_recover -> link okay?!
ata5: ata_eh_recover -> revalidate_and_attach
ata5: attemping to enable power management!
ata_eh_recover -> link okay?!
0000:00:05.0 ISA bridge [0601]: Contaq Microsystems 82c693 [1080:c693]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00: 80 10 93 c6 07 00 80 02 00 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:05.1 IDE interface [0101]: Contaq Microsystems 82c693 [1080:c693] (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 14
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at 9000 [size=16]
00: 80 10 93 c6 05 00 80 02 00 80 01 01 00 00 80 00
10: f1 01 00 00 f5 03 00 00 00 00 00 00 00 00 00 00
20: 01 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 0e 01 00 00
0000:00:05.2 IDE interface [0101]: Contaq Microsystems 82c693 [1080:c693] (prog-if 00 [])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 15
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: Memory at 09a80000 (32-bit, non-prefetchable) [disabled] [size=64K]
00: 80 10 93 c6 05 00 80 02 00 00 01 01 00 00 80 00
10: 71 01 00 00 75 03 00 00 00 00 00 00 00 00 00 00
20: 00 00 a8 09 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 0f 02 00 00
0000:00:05.3 USB Controller [0c03]: Contaq Microsystems 82c693 [1080:c693] (prog-if 10 [OHCI])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at 09aa8000 (32-bit, non-prefetchable) [size=4K]
00: 80 10 93 c6 07 00 80 02 00 10 03 0c 08 f8 80 00
10: 00 80 aa 09 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
0000:00:07.0 Mass storage controller [0180]: Silicon Image, Inc. SiI 3124 PCI-X Serial ATA Controller [1095:3124] (rev 02)
Subsystem: Silicon Image, Inc. SiI 3124 PCI-X Serial ATA Controller [1095:3124]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 240, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 31
Region 0: Memory at 09aa9000 (64-bit, non-prefetchable) [size=128]
Region 2: Memory at 09aa0000 (64-bit, non-prefetchable) [size=32K]
Region 4: I/O ports at 9010 [size=16]
Expansion ROM at 09a00000 [disabled] [size=512K]
Capabilities: [64] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [40] PCI-X non-bridge device
Command: DPERE- ERO+ RBC=512 OST=12
Status: Dev=ff:1f.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=12 DMCRS=128 RSCEM- 266MHz- 533MHz-
Capabilities: [54] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
00: 95 10 24 31 87 00 b0 82 02 00 80 01 10 f0 00 00
10: 04 90 aa 09 00 00 00 00 04 00 aa 09 00 00 00 00
20: 11 90 00 00 00 00 00 00 00 00 00 00 95 10 24 31
30: 00 00 90 01 64 00 00 00 00 00 00 00 1f 01 00 00
0000:00:08.0 PCI bridge [0604]: Digital Equipment Corporation DECchip 21152 [1011:0024] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 255, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=255
I/O behind bridge: 00008000-00008fff
Memory behind bridge: 09800000-098fffff
Prefetchable memory behind bridge: 0000000009900000-00000000099fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=220mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
00: 11 10 24 00 07 00 90 02 03 00 04 06 10 ff 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 ff 81 81 80 02
20: 80 09 80 09 91 09 91 09 00 00 00 00 00 00 00 00
30: 00 00 00 00 dc 00 00 00 00 00 00 00 00 00 03 00
0000:00:09.0 VGA compatible controller [0300]: S3 Inc. 86c764/765 [Trio32/64/64V+] [5333:8811] (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 23
Region 0: Memory at 09000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at 09a90000 [disabled] [size=64K]
00: 33 53 11 88 03 00 00 02 00 00 00 03 00 00 00 00
10: 00 00 00 09 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 99 01 00 00 00 00 00 00 00 00 17 01 00 00
0000:01:00.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c875 [1000:000f] (rev 04)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 255 (4250ns min, 16000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Region 0: I/O ports at 8000 [size=256]
Region 1: Memory at 09802000 (32-bit, non-prefetchable) [size=256]
Region 2: Memory at 09800000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at 09940000 [disabled] [size=64K]
00: 00 10 0f 00 17 00 00 02 04 00 00 01 10 ff 00 00
10: 01 80 00 00 00 20 80 09 00 00 80 09 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 84 01 00 00 00 00 00 00 00 00 1b 01 11 40
0000:01:01.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c875 [1000:000f] (rev 04)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 255 (4250ns min, 16000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
Region 0: I/O ports at 8400 [size=256]
Region 1: Memory at 09803000 (32-bit, non-prefetchable) [size=256]
Region 2: Memory at 09801000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at 09950000 [disabled] [size=64K]
00: 00 10 0f 00 17 00 00 02 04 00 00 01 10 ff 00 00
10: 01 84 00 00 00 30 80 09 00 10 80 09 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 85 01 00 00 00 00 00 00 00 00 1a 01 11 40
0000:01:02.0 Ethernet controller [0200]: Digital Equipment Corporation DECchip 21140 [FasterNet] [1011:0009] (rev 22)
Subsystem: Digital Equipment Corporation Unknown device [1011:500a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 255 (5000ns min, 10000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Region 0: I/O ports at 8800 [size=128]
Region 1: Memory at 09804000 (32-bit, non-prefetchable) [size=128]
Expansion ROM at 09900000 [disabled] [size=256K]
00: 11 10 09 00 07 00 80 02 22 00 00 02 10 ff 00 00
10: 01 88 00 00 00 40 80 09 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 11 10 0a 50
30: 00 00 80 01 00 00 00 00 00 00 00 00 19 01 14 28
0001:02:08.0 RAID bus controller [0104]: VIA Technologies, Inc. VT6421 IDE RAID Controller [1106:3249] (rev 50)
Subsystem: VIA Technologies, Inc. VT6421 IDE RAID Controller [1106:3249]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 240
Interrupt: pin A routed to IRQ 43
Region 0: I/O ports at 200008820 [size=16]
Region 1: I/O ports at 200008830 [size=16]
Region 2: I/O ports at 200008840 [size=16]
Region 3: I/O ports at 200008850 [size=16]
Region 4: I/O ports at 200008800 [size=32]
Region 5: I/O ports at 200008000 [size=256]
Expansion ROM at 209000000 [disabled] [size=64K]
Capabilities: [e0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 06 11 49 32 07 00 90 02 50 00 04 01 00 f0 00 00
10: 21 88 00 00 31 88 00 00 41 88 00 00 51 88 00 00
20: 01 88 00 00 01 80 00 00 00 00 00 00 06 11 49 32
30: 00 00 00 01 e0 00 00 00 00 00 00 00 2b 01 00 00
0001:02:09.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6120/VT6121/VT6122 Gigabit Ethernet Adapter [1106:3119] (rev 01)
Subsystem: ZyXEL Communication Corporation Unknown device [187e:3302]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 39
Region 0: I/O ports at 200008400 [size=256]
Region 1: Memory at 209010000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D3 PME-Enable- DSel=0 DScale=0 PME-
00: 06 11 19 31 03 00 30 02 01 00 00 02 10 f8 00 00
10: 01 84 00 00 00 00 01 09 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 7e 18 02 33
30: 00 00 00 00 50 00 00 00 00 00 00 00 27 01 03 08
next prev parent reply other threads:[~2008-01-25 17:28 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <4794459C.3090200@gmail.com>
2008-01-21 7:26 ` sata_sil24 / Alpha / 4726 PMP issue Tejun Heo
2008-01-21 16:42 ` Thomas Evans
2008-01-21 16:47 ` Thomas Evans
2008-01-22 2:26 ` Tejun Heo
2008-01-23 4:34 ` Thomas Evans
2008-01-23 6:18 ` Tejun Heo
2008-01-24 0:22 ` Thomas Evans
2008-01-24 1:42 ` Tejun Heo
[not found] ` <864c1e490801231823v3e9cf61ds2a0d553ed5b61fb2@mail.gmail.com>
2008-01-24 2:32 ` Tejun Heo
2008-01-24 3:39 ` Thomas Evans
2008-01-24 3:52 ` Tejun Heo
2008-01-24 15:07 ` Thomas Evans
2008-01-24 15:11 ` Tejun Heo
2008-01-24 16:40 ` Thomas Evans
2008-01-24 17:08 ` Tejun Heo
[not found] ` <4798CA71.20707@gmail.com>
[not found] ` <4798CC90.4040707@gmail.com>
[not found] ` <4798CCDF.9070305@gmail.com>
[not found] ` <4798CE10.2050005@gmail.com>
[not found] ` <4798D4A2.7030303@gmail.com>
[not found] ` <47991AD9.6050804@gmail.com>
[not found] ` <47993686.5040405@gmail.com>
[not found] ` <479939E3.4020307@gmail.com>
2008-01-25 6:04 ` Thomas Evans
2008-01-25 17:28 ` Thomas Evans [this message]
2008-01-25 17:59 ` Thomas Evans
2008-01-25 18:16 ` Jay Estabrook
2008-01-27 22:50 ` Thomas Evans
2008-01-28 0:44 ` Tejun Heo
2008-01-28 6:51 ` Thomas Evans
2008-01-29 4:00 ` Thomas Evans
2008-01-29 4:24 ` Tejun Heo
2008-01-29 4:31 ` Thomas Evans
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=479A1C48.1070209@gmail.com \
--to=evans02472@gmail.com \
--cc=Jay.Estabrook@hp.com \
--cc=htejun@gmail.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.