From: Jon Loeliger <jdl@freescale.com>
To: linuxppc-dev <linuxppc-dev@ozlabs.org>
Subject: [PATCH] POWERPC: Convert all 86xx DTS files to /dts-v1/ format.
Date: Fri, 25 Jan 2008 16:31:01 -0600 [thread overview]
Message-ID: <479A6325.2030500@freescale.com> (raw)
Also fixed a few minor indent problems as well.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
---
arch/powerpc/boot/dts/mpc8610_hpcd.dts | 227 +++++++++++-----------
arch/powerpc/boot/dts/mpc8641_hpcn.dts | 333 ++++++++++++++++----------------
2 files changed, 281 insertions(+), 279 deletions(-)
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index d98715c..16c947b 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -8,6 +8,7 @@
* by the Free Software Foundation.
*/
+/dts-v1/;
/ {
model = "MPC8610HPCD";
@@ -29,11 +30,11 @@
PowerPC,8610@0 {
device_type = "cpu";
reg = <0>;
- d-cache-line-size = <d# 32>; // bytes
- i-cache-line-size = <d# 32>; // bytes
- d-cache-size = <8000>; // L1, 32K
- i-cache-size = <8000>; // L1, 32K
- timebase-frequency = <0>; // 33 MHz, from uboot
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <32768>; // L1
+ i-cache-size = <32768>; // L1
+ timebase-frequency = <0>; // From uboot
bus-frequency = <0>; // From uboot
clock-frequency = <0>; // From uboot
};
@@ -41,7 +42,7 @@
memory {
device_type = "memory";
- reg = <00000000 20000000>; // 512M at 0x0
+ reg = <0x00000000 0x20000000>; // 512M at 0x0
};
soc@e0000000 {
@@ -50,8 +51,8 @@
#interrupt-cells = <2>;
device_type = "soc";
compatible = "fsl,mpc8610-immr", "simple-bus";
- ranges = <0 e0000000 00100000>;
- reg = <e0000000 1000>;
+ ranges = <0x0 0xe0000000 0x00100000>;
+ reg = <0xe0000000 0x1000>;
bus-frequency = <0>;
i2c@3000 {
@@ -59,17 +60,17 @@
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
- reg = <3000 100>;
- interrupts = <2b 2>;
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
- cs4270:codec@4f {
+ cs4270:codec@4f {
compatible = "cirrus,cs4270";
- reg = <4f>;
+ reg = <0x4f>;
/* MCLK source is a stand-alone oscillator */
- clock-frequency = <bb8000>;
- };
+ clock-frequency = <12288000>;
+ };
};
i2c@3100 {
@@ -77,8 +78,8 @@
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
- reg = <3100 100>;
- interrupts = <2b 2>;
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
@@ -87,9 +88,9 @@
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
- reg = <4500 100>;
+ reg = <0x4500 0x100>;
clock-frequency = <0>;
- interrupts = <2a 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
@@ -97,9 +98,9 @@
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
- reg = <4600 100>;
+ reg = <0x4600 0x100>;
clock-frequency = <0>;
- interrupts = <1c 2>;
+ interrupts = <28 2>;
interrupt-parent = <&mpic>;
};
@@ -108,7 +109,7 @@
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
- reg = <40000 40000>;
+ reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
@@ -116,16 +117,16 @@
global-utilities@e0000 {
compatible = "fsl,mpc8610-guts";
- reg = <e0000 1000>;
+ reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
i2s@16000 {
compatible = "fsl,mpc8610-ssi";
cell-index = <0>;
- reg = <16000 100>;
+ reg = <0x16000 0x100>;
interrupt-parent = <&mpic>;
- interrupts = <3e 2>;
+ interrupts = <62 2>;
fsl,mode = "i2s-slave";
codec-handle = <&cs4270>;
};
@@ -133,94 +134,94 @@
ssi@16100 {
compatible = "fsl,mpc8610-ssi";
cell-index = <1>;
- reg = <16100 100>;
+ reg = <0x16100 0x100>;
interrupt-parent = <&mpic>;
- interrupts = <3f 2>;
+ interrupts = <63 2>;
};
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8610-dma", "fsl,eloplus-dma";
- cell-index = <0>;
- reg = <21300 4>; /* DMA general status register */
- ranges = <0 21100 200>;
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8610-dma", "fsl,eloplus-dma";
+ cell-index = <0>;
+ reg = <0x21300 0x4>; /* DMA general status register */
+ ranges = <0x0 0x21100 0x200>;
- dma-channel@0 {
+ dma-channel@0 {
compatible = "fsl,mpc8610-dma-channel",
"fsl,eloplus-dma-channel";
cell-index = <0>;
- reg = <0 80>;
+ reg = <0x0 0x80>;
interrupt-parent = <&mpic>;
- interrupts = <14 2>;
- };
- dma-channel@1 {
+ interrupts = <20 2>;
+ };
+ dma-channel@1 {
compatible = "fsl,mpc8610-dma-channel",
"fsl,eloplus-dma-channel";
cell-index = <1>;
- reg = <80 80>;
+ reg = <0x80 0x80>;
interrupt-parent = <&mpic>;
- interrupts = <15 2>;
- };
- dma-channel@2 {
+ interrupts = <21 2>;
+ };
+ dma-channel@2 {
compatible = "fsl,mpc8610-dma-channel",
"fsl,eloplus-dma-channel";
cell-index = <2>;
- reg = <100 80>;
+ reg = <0x100 0x80>;
interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
- dma-channel@3 {
+ interrupts = <22 2>;
+ };
+ dma-channel@3 {
compatible = "fsl,mpc8610-dma-channel",
"fsl,eloplus-dma-channel";
cell-index = <3>;
- reg = <180 80>;
+ reg = <0x180 0x80>;
interrupt-parent = <&mpic>;
- interrupts = <17 2>;
- };
- };
+ interrupts = <23 2>;
+ };
+ };
- dma@c300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8610-dma", "fsl,mpc8540-dma";
- cell-index = <1>;
- reg = <c300 4>; /* DMA general status register */
- ranges = <0 c100 200>;
+ dma@c300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8610-dma", "fsl,mpc8540-dma";
+ cell-index = <1>;
+ reg = <0xc300 0x4>; /* DMA general status register */
+ ranges = <0x0 0xc100 0x200>;
- dma-channel@0 {
+ dma-channel@0 {
compatible = "fsl,mpc8610-dma-channel",
"fsl,mpc8540-dma-channel";
cell-index = <0>;
- reg = <0 80>;
+ reg = <0x0 0x80>;
interrupt-parent = <&mpic>;
- interrupts = <3c 2>;
- };
- dma-channel@1 {
+ interrupts = <60 2>;
+ };
+ dma-channel@1 {
compatible = "fsl,mpc8610-dma-channel",
"fsl,mpc8540-dma-channel";
cell-index = <1>;
- reg = <80 80>;
+ reg = <0x80 0x80>;
interrupt-parent = <&mpic>;
- interrupts = <3d 2>;
- };
- dma-channel@2 {
+ interrupts = <61 2>;
+ };
+ dma-channel@2 {
compatible = "fsl,mpc8610-dma-channel",
"fsl,mpc8540-dma-channel";
cell-index = <2>;
- reg = <100 80>;
+ reg = <0x100 0x80>;
interrupt-parent = <&mpic>;
- interrupts = <3e 2>;
- };
- dma-channel@3 {
+ interrupts = <62 2>;
+ };
+ dma-channel@3 {
compatible = "fsl,mpc8610-dma-channel",
"fsl,mpc8540-dma-channel";
cell-index = <3>;
- reg = <180 80>;
+ reg = <0x180 0x80>;
interrupt-parent = <&mpic>;
- interrupts = <3f 2>;
- };
- };
+ interrupts = <63 2>;
+ };
+ };
};
@@ -231,26 +232,26 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e0008000 1000>;
+ reg = <0xe0008000 0x1000>;
bus-range = <0 0>;
- ranges = <02000000 0 80000000 80000000 0 10000000
- 01000000 0 00000000 e1000000 0 00100000>;
- clock-frequency = <1fca055>;
+ ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+ 0x01000000 0x0 0x00000000 0xe1000000 0x0 0x00100000>;
+ clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupts = <24 2>;
+ interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 */
- 8800 0 0 1 &mpic 4 1
- 8800 0 0 2 &mpic 5 1
- 8800 0 0 3 &mpic 6 1
- 8800 0 0 4 &mpic 7 1
+ 0x8800 0 0 1 &mpic 4 1
+ 0x8800 0 0 2 &mpic 5 1
+ 0x8800 0 0 3 &mpic 6 1
+ 0x8800 0 0 4 &mpic 7 1
/* IDSEL 0x12 */
- 9000 0 0 1 &mpic 5 1
- 9000 0 0 2 &mpic 6 1
- 9000 0 0 3 &mpic 7 1
- 9000 0 0 4 &mpic 4 1
+ 0x9000 0 0 1 &mpic 5 1
+ 0x9000 0 0 2 &mpic 6 1
+ 0x9000 0 0 3 &mpic 7 1
+ 0x9000 0 0 4 &mpic 4 1
>;
};
@@ -261,28 +262,28 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e000a000 1000>;
+ reg = <0xe000a000 0x1000>;
bus-range = <1 3>;
- ranges = <02000000 0 a0000000 a0000000 0 10000000
- 01000000 0 00000000 e3000000 0 00100000>;
- clock-frequency = <1fca055>;
+ ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+ 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>;
+ clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
- interrupts = <1a 2>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupts = <26 2>;
+ interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x1b */
- d800 0 0 1 &mpic 2 1
+ 0xd800 0 0 1 &mpic 2 1
/* IDSEL 0x1c*/
- e000 0 0 1 &mpic 1 1
- e000 0 0 2 &mpic 1 1
- e000 0 0 3 &mpic 1 1
- e000 0 0 4 &mpic 1 1
+ 0xe000 0 0 1 &mpic 1 1
+ 0xe000 0 0 2 &mpic 1 1
+ 0xe000 0 0 3 &mpic 1 1
+ 0xe000 0 0 4 &mpic 1 1
/* IDSEL 0x1f */
- f800 0 0 1 &mpic 3 0
- f800 0 0 2 &mpic 0 1
+ 0xf800 0 0 1 &mpic 3 0
+ 0xf800 0 0 2 &mpic 0 1
>;
pcie@0 {
@@ -290,22 +291,22 @@
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- ranges = <02000000 0 a0000000
- 02000000 0 a0000000
- 0 10000000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 00100000>;
+ ranges = <0x02000000 0x0 0xa0000000
+ 0x02000000 0x0 0xa0000000
+ 0x0 0x10000000
+ 0x01000000 0x0 0x00000000
+ 0x01000000 0x0 0x00000000
+ 0x0 0x00100000>;
uli1575@0 {
reg = <0 0 0 0 0>;
#size-cells = <2>;
#address-cells = <3>;
- ranges = <02000000 0 a0000000
- 02000000 0 a0000000
- 0 10000000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 00100000>;
+ ranges = <0x02000000 0x0 0xa0000000
+ 0x02000000 0x0 0xa0000000
+ 0x0 0x10000000
+ 0x01000000 0x0 0x00000000
+ 0x01000000 0x0 0x00000000
+ 0x0 0x00100000>;
};
};
};
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index 556a9ca..79385bc 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -9,6 +9,7 @@
* option) any later version.
*/
+/dts-v1/;
/ {
model = "MPC8641HPCN";
@@ -34,22 +35,22 @@
PowerPC,8641@0 {
device_type = "cpu";
reg = <0>;
- d-cache-line-size = <20>; // 32 bytes
- i-cache-line-size = <20>; // 32 bytes
- d-cache-size = <8000>; // L1, 32K
- i-cache-size = <8000>; // L1, 32K
- timebase-frequency = <0>; // 33 MHz, from uboot
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <32768>; // L1
+ i-cache-size = <32768>; // L1
+ timebase-frequency = <0>; // From uboot
bus-frequency = <0>; // From uboot
clock-frequency = <0>; // From uboot
};
PowerPC,8641@1 {
device_type = "cpu";
reg = <1>;
- d-cache-line-size = <20>; // 32 bytes
- i-cache-line-size = <20>; // 32 bytes
- d-cache-size = <8000>; // L1, 32K
- i-cache-size = <8000>; // L1, 32K
- timebase-frequency = <0>; // 33 MHz, from uboot
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <32768>;
+ i-cache-size = <32768>;
+ timebase-frequency = <0>; // From uboot
bus-frequency = <0>; // From uboot
clock-frequency = <0>; // From uboot
};
@@ -57,45 +58,45 @@
memory {
device_type = "memory";
- reg = <00000000 40000000>; // 1G at 0x0
+ reg = <0x00000000 0x40000000>; // 1G at 0x0
};
localbus@f8005000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc8641-localbus", "simple-bus";
- reg = <f8005000 1000>;
- interrupts = <13 2>;
+ reg = <0xf8005000 0x1000>;
+ interrupts = <19 2>;
interrupt-parent = <&mpic>;
- ranges = <0 0 ff800000 00800000
- 1 0 fe000000 01000000
- 2 0 f8200000 00100000
- 3 0 f8100000 00100000>;
+ ranges = <0 0 0xff800000 0x00800000
+ 1 0 0xfe000000 0x01000000
+ 2 0 0xf8200000 0x00100000
+ 3 0 0xf8100000 0x00100000>;
flash@0,0 {
compatible = "cfi-flash";
- reg = <0 0 00800000>;
+ reg = <0 0 0x00800000>;
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
- reg = <00000000 00300000>;
+ reg = <0x00000000 0x00300000>;
};
partition@300000 {
label = "firmware b";
- reg = <00300000 00100000>;
+ reg = <0x00300000 0x00100000>;
read-only;
};
partition@400000 {
label = "fs";
- reg = <00400000 00300000>;
+ reg = <0x00400000 0x00300000>;
};
partition@700000 {
label = "firmware a";
- reg = <00700000 00100000>;
+ reg = <0x00700000 0x00100000>;
read-only;
};
};
@@ -106,8 +107,8 @@
#size-cells = <1>;
device_type = "soc";
compatible = "simple-bus";
- ranges = <00000000 f8000000 00100000>;
- reg = <f8000000 00001000>; // CCSRBAR
+ ranges = <0x00000000 0xf8000000 0x00100000>;
+ reg = <0xf8000000 0x00001000>; // CCSRBAR
bus-frequency = <0>;
i2c@3000 {
@@ -115,8 +116,8 @@
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
- reg = <3000 100>;
- interrupts = <2b 2>;
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
@@ -126,8 +127,8 @@
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
- reg = <3100 100>;
- interrupts = <2b 2>;
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
@@ -136,29 +137,29 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
- reg = <24520 20>;
+ reg = <0x24520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
- interrupts = <a 1>;
+ interrupts = <10 1>;
reg = <0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
- interrupts = <a 1>;
+ interrupts = <10 1>;
reg = <1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
- interrupts = <a 1>;
+ interrupts = <10 1>;
reg = <2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
- interrupts = <a 1>;
+ interrupts = <10 1>;
reg = <3>;
device_type = "ethernet-phy";
};
@@ -169,9 +170,9 @@
device_type = "network";
model = "TSEC";
compatible = "gianfar";
- reg = <24000 1000>;
+ reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <1d 2 1e 2 22 2>;
+ interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
@@ -182,9 +183,9 @@
device_type = "network";
model = "TSEC";
compatible = "gianfar";
- reg = <25000 1000>;
+ reg = <0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <23 2 24 2 28 2>;
+ interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
@@ -195,9 +196,9 @@
device_type = "network";
model = "TSEC";
compatible = "gianfar";
- reg = <26000 1000>;
+ reg = <0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <1F 2 20 2 21 2>;
+ interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
@@ -208,9 +209,9 @@
device_type = "network";
model = "TSEC";
compatible = "gianfar";
- reg = <27000 1000>;
+ reg = <0x27000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <25 2 26 2 27 2>;
+ interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy3>;
phy-connection-type = "rgmii-id";
@@ -220,9 +221,9 @@
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
- reg = <4500 100>;
+ reg = <0x4500 0x100>;
clock-frequency = <0>;
- interrupts = <2a 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
@@ -230,9 +231,9 @@
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
- reg = <4600 100>;
+ reg = <0x4600 0x100>;
clock-frequency = <0>;
- interrupts = <1c 2>;
+ interrupts = <28 2>;
interrupt-parent = <&mpic>;
};
@@ -241,7 +242,7 @@
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
- reg = <40000 40000>;
+ reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
@@ -249,7 +250,7 @@
global-utilities@e0000 {
compatible = "fsl,mpc8641-guts";
- reg = <e0000 1000>;
+ reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
};
@@ -261,127 +262,127 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <f8008000 1000>;
- bus-range = <0 ff>;
- ranges = <02000000 0 80000000 80000000 0 20000000
- 01000000 0 00000000 e2000000 0 00100000>;
- clock-frequency = <1fca055>;
+ reg = <0xf8008000 0x1000>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+ 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+ clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- interrupt-map-mask = <ff00 0 0 7>;
+ interrupts = <24 2>;
+ interrupt-map-mask = <0xff00 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 func 0 - PCI slot 1 */
- 8800 0 0 1 &mpic 2 1
- 8800 0 0 2 &mpic 3 1
- 8800 0 0 3 &mpic 4 1
- 8800 0 0 4 &mpic 1 1
+ 0x8800 0 0 1 &mpic 2 1
+ 0x8800 0 0 2 &mpic 3 1
+ 0x8800 0 0 3 &mpic 4 1
+ 0x8800 0 0 4 &mpic 1 1
/* IDSEL 0x11 func 1 - PCI slot 1 */
- 8900 0 0 1 &mpic 2 1
- 8900 0 0 2 &mpic 3 1
- 8900 0 0 3 &mpic 4 1
- 8900 0 0 4 &mpic 1 1
+ 0x8900 0 0 1 &mpic 2 1
+ 0x8900 0 0 2 &mpic 3 1
+ 0x8900 0 0 3 &mpic 4 1
+ 0x8900 0 0 4 &mpic 1 1
/* IDSEL 0x11 func 2 - PCI slot 1 */
- 8a00 0 0 1 &mpic 2 1
- 8a00 0 0 2 &mpic 3 1
- 8a00 0 0 3 &mpic 4 1
- 8a00 0 0 4 &mpic 1 1
+ 0x8a00 0 0 1 &mpic 2 1
+ 0x8a00 0 0 2 &mpic 3 1
+ 0x8a00 0 0 3 &mpic 4 1
+ 0x8a00 0 0 4 &mpic 1 1
/* IDSEL 0x11 func 3 - PCI slot 1 */
- 8b00 0 0 1 &mpic 2 1
- 8b00 0 0 2 &mpic 3 1
- 8b00 0 0 3 &mpic 4 1
- 8b00 0 0 4 &mpic 1 1
+ 0x8b00 0 0 1 &mpic 2 1
+ 0x8b00 0 0 2 &mpic 3 1
+ 0x8b00 0 0 3 &mpic 4 1
+ 0x8b00 0 0 4 &mpic 1 1
/* IDSEL 0x11 func 4 - PCI slot 1 */
- 8c00 0 0 1 &mpic 2 1
- 8c00 0 0 2 &mpic 3 1
- 8c00 0 0 3 &mpic 4 1
- 8c00 0 0 4 &mpic 1 1
+ 0x8c00 0 0 1 &mpic 2 1
+ 0x8c00 0 0 2 &mpic 3 1
+ 0x8c00 0 0 3 &mpic 4 1
+ 0x8c00 0 0 4 &mpic 1 1
/* IDSEL 0x11 func 5 - PCI slot 1 */
- 8d00 0 0 1 &mpic 2 1
- 8d00 0 0 2 &mpic 3 1
- 8d00 0 0 3 &mpic 4 1
- 8d00 0 0 4 &mpic 1 1
+ 0x8d00 0 0 1 &mpic 2 1
+ 0x8d00 0 0 2 &mpic 3 1
+ 0x8d00 0 0 3 &mpic 4 1
+ 0x8d00 0 0 4 &mpic 1 1
/* IDSEL 0x11 func 6 - PCI slot 1 */
- 8e00 0 0 1 &mpic 2 1
- 8e00 0 0 2 &mpic 3 1
- 8e00 0 0 3 &mpic 4 1
- 8e00 0 0 4 &mpic 1 1
+ 0x8e00 0 0 1 &mpic 2 1
+ 0x8e00 0 0 2 &mpic 3 1
+ 0x8e00 0 0 3 &mpic 4 1
+ 0x8e00 0 0 4 &mpic 1 1
/* IDSEL 0x11 func 7 - PCI slot 1 */
- 8f00 0 0 1 &mpic 2 1
- 8f00 0 0 2 &mpic 3 1
- 8f00 0 0 3 &mpic 4 1
- 8f00 0 0 4 &mpic 1 1
+ 0x8f00 0 0 1 &mpic 2 1
+ 0x8f00 0 0 2 &mpic 3 1
+ 0x8f00 0 0 3 &mpic 4 1
+ 0x8f00 0 0 4 &mpic 1 1
/* IDSEL 0x12 func 0 - PCI slot 2 */
- 9000 0 0 1 &mpic 3 1
- 9000 0 0 2 &mpic 4 1
- 9000 0 0 3 &mpic 1 1
- 9000 0 0 4 &mpic 2 1
+ 0x9000 0 0 1 &mpic 3 1
+ 0x9000 0 0 2 &mpic 4 1
+ 0x9000 0 0 3 &mpic 1 1
+ 0x9000 0 0 4 &mpic 2 1
/* IDSEL 0x12 func 1 - PCI slot 2 */
- 9100 0 0 1 &mpic 3 1
- 9100 0 0 2 &mpic 4 1
- 9100 0 0 3 &mpic 1 1
- 9100 0 0 4 &mpic 2 1
+ 0x9100 0 0 1 &mpic 3 1
+ 0x9100 0 0 2 &mpic 4 1
+ 0x9100 0 0 3 &mpic 1 1
+ 0x9100 0 0 4 &mpic 2 1
/* IDSEL 0x12 func 2 - PCI slot 2 */
- 9200 0 0 1 &mpic 3 1
- 9200 0 0 2 &mpic 4 1
- 9200 0 0 3 &mpic 1 1
- 9200 0 0 4 &mpic 2 1
+ 0x9200 0 0 1 &mpic 3 1
+ 0x9200 0 0 2 &mpic 4 1
+ 0x9200 0 0 3 &mpic 1 1
+ 0x9200 0 0 4 &mpic 2 1
/* IDSEL 0x12 func 3 - PCI slot 2 */
- 9300 0 0 1 &mpic 3 1
- 9300 0 0 2 &mpic 4 1
- 9300 0 0 3 &mpic 1 1
- 9300 0 0 4 &mpic 2 1
+ 0x9300 0 0 1 &mpic 3 1
+ 0x9300 0 0 2 &mpic 4 1
+ 0x9300 0 0 3 &mpic 1 1
+ 0x9300 0 0 4 &mpic 2 1
/* IDSEL 0x12 func 4 - PCI slot 2 */
- 9400 0 0 1 &mpic 3 1
- 9400 0 0 2 &mpic 4 1
- 9400 0 0 3 &mpic 1 1
- 9400 0 0 4 &mpic 2 1
+ 0x9400 0 0 1 &mpic 3 1
+ 0x9400 0 0 2 &mpic 4 1
+ 0x9400 0 0 3 &mpic 1 1
+ 0x9400 0 0 4 &mpic 2 1
/* IDSEL 0x12 func 5 - PCI slot 2 */
- 9500 0 0 1 &mpic 3 1
- 9500 0 0 2 &mpic 4 1
- 9500 0 0 3 &mpic 1 1
- 9500 0 0 4 &mpic 2 1
+ 0x9500 0 0 1 &mpic 3 1
+ 0x9500 0 0 2 &mpic 4 1
+ 0x9500 0 0 3 &mpic 1 1
+ 0x9500 0 0 4 &mpic 2 1
/* IDSEL 0x12 func 6 - PCI slot 2 */
- 9600 0 0 1 &mpic 3 1
- 9600 0 0 2 &mpic 4 1
- 9600 0 0 3 &mpic 1 1
- 9600 0 0 4 &mpic 2 1
+ 0x9600 0 0 1 &mpic 3 1
+ 0x9600 0 0 2 &mpic 4 1
+ 0x9600 0 0 3 &mpic 1 1
+ 0x9600 0 0 4 &mpic 2 1
/* IDSEL 0x12 func 7 - PCI slot 2 */
- 9700 0 0 1 &mpic 3 1
- 9700 0 0 2 &mpic 4 1
- 9700 0 0 3 &mpic 1 1
- 9700 0 0 4 &mpic 2 1
+ 0x9700 0 0 1 &mpic 3 1
+ 0x9700 0 0 2 &mpic 4 1
+ 0x9700 0 0 3 &mpic 1 1
+ 0x9700 0 0 4 &mpic 2 1
// IDSEL 0x1c USB
- e000 0 0 1 &i8259 c 2
- e100 0 0 2 &i8259 9 2
- e200 0 0 3 &i8259 a 2
- e300 0 0 4 &i8259 b 2
+ 0xe000 0 0 1 &i8259 12 2
+ 0xe100 0 0 2 &i8259 9 2
+ 0xe200 0 0 3 &i8259 10 2
+ 0xe300 0 0 4 &i8259 112
// IDSEL 0x1d Audio
- e800 0 0 1 &i8259 6 2
+ 0xe800 0 0 1 &i8259 6 2
// IDSEL 0x1e Legacy
- f000 0 0 1 &i8259 7 2
- f100 0 0 1 &i8259 7 2
+ 0xf000 0 0 1 &i8259 7 2
+ 0xf100 0 0 1 &i8259 7 2
// IDSEL 0x1f IDE/SATA
- f800 0 0 1 &i8259 e 2
- f900 0 0 1 &i8259 5 2
+ 0xf800 0 0 1 &i8259 14 2
+ 0xf900 0 0 1 &i8259 5 2
>;
pcie@0 {
@@ -389,37 +390,37 @@
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- ranges = <02000000 0 80000000
- 02000000 0 80000000
- 0 20000000
+ ranges = <0x02000000 0x0 0x80000000
+ 0x02000000 0x0 0x80000000
+ 0x0 0x20000000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 00100000>;
+ 0x01000000 0x0 0x00000000
+ 0x01000000 0x0 0x00000000
+ 0x0 0x00100000>;
uli1575@0 {
reg = <0 0 0 0 0>;
#size-cells = <2>;
#address-cells = <3>;
- ranges = <02000000 0 80000000
- 02000000 0 80000000
- 0 20000000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 00100000>;
+ ranges = <0x02000000 0x0 0x80000000
+ 0x02000000 0x0 0x80000000
+ 0x0 0x20000000
+ 0x01000000 0x0 0x00000000
+ 0x01000000 0x0 0x00000000
+ 0x0 0x00100000>;
isa@1e {
device_type = "isa";
#interrupt-cells = <2>;
#size-cells = <1>;
#address-cells = <2>;
- reg = <f000 0 0 0 0>;
- ranges = <1 0 01000000 0 0
- 00001000>;
+ reg = <0xf000 0 0 0 0>;
+ ranges = <1 0 0x01000000 0 0
+ 0x00001000>;
interrupt-parent = <&i8259>;
i8259: interrupt-controller@20 {
- reg = <1 20 2
- 1 a0 2
- 1 4d0 2>;
+ reg = <1 0x20 2
+ 1 0xa0 2
+ 1 0x4d0 2>;
interrupt-controller;
device_type = "interrupt-controller";
#address-cells = <0>;
@@ -432,8 +433,8 @@
i8042@60 {
#size-cells = <0>;
#address-cells = <1>;
- reg = <1 60 1 1 64 1>;
- interrupts = <1 3 c 3>;
+ reg = <1 0x60 1 1 0x64 1>;
+ interrupts = <1 3 12 3>;
interrupt-parent =
<&i8259>;
@@ -451,11 +452,11 @@
rtc@70 {
compatible =
"pnpPNP,b00";
- reg = <1 70 2>;
+ reg = <1 0x70 2>;
};
gpio@400 {
- reg = <1 400 80>;
+ reg = <1 0x400 0x80>;
};
};
};
@@ -470,33 +471,33 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <f8009000 1000>;
- bus-range = <0 ff>;
- ranges = <02000000 0 a0000000 a0000000 0 20000000
- 01000000 0 00000000 e3000000 0 00100000>;
- clock-frequency = <1fca055>;
+ reg = <0xf8009000 0x1000>;
+ bus-range = <0 0xff>;
+ ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+ 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>;
+ clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
- interrupts = <19 2>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupts = <25 2>;
+ interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
- 0000 0 0 1 &mpic 4 1
- 0000 0 0 2 &mpic 5 1
- 0000 0 0 3 &mpic 6 1
- 0000 0 0 4 &mpic 7 1
+ 0x0000 0 0 1 &mpic 4 1
+ 0x0000 0 0 2 &mpic 5 1
+ 0x0000 0 0 3 &mpic 6 1
+ 0x0000 0 0 4 &mpic 7 1
>;
pcie@0 {
reg = <0 0 0 0 0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- ranges = <02000000 0 a0000000
- 02000000 0 a0000000
- 0 20000000
+ ranges = <0x02000000 0x0 0xa0000000
+ 0x02000000 0x0 0xa0000000
+ 0x0 0x20000000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 00100000>;
+ 0x01000000 0x0 0x00000000
+ 0x01000000 0x0 0x00000000
+ 0x0 0x00100000>;
};
};
};
--
1.5.2.1.126.g6abd0
next reply other threads:[~2008-01-26 1:33 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-25 22:31 Jon Loeliger [this message]
2008-01-28 14:46 ` [PATCH] POWERPC: Convert all 86xx DTS files to /dts-v1/ format Kumar Gala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=479A6325.2030500@freescale.com \
--to=jdl@freescale.com \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.