* [PATCH 2.6.24] ata_piix: IDE mode SATA patch for Intel ICH10 DeviceID's
@ 2008-01-29 1:36 Jason Gaston
2008-01-29 17:14 ` Jeff Garzik
0 siblings, 1 reply; 4+ messages in thread
From: Jason Gaston @ 2008-01-29 1:36 UTC (permalink / raw)
To: jgarzik, jason.d.gaston, linux-ide, linux-kernel, htejun
This patch adds the Intel ICH10 IDE mode SATA Controller DeviceID's.
Signed-off-by: Jason Gaston <jason.d.gaston@intel.com>
--- linux-2.6.24/drivers/ata/ata_piix.c.orig 2008-01-24 14:58:37.000000000 -0800
+++ linux-2.6.24/drivers/ata/ata_piix.c 2008-01-28 14:58:22.000000000 -0800
@@ -263,6 +263,14 @@
{ 0x8086, 0x292e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
/* SATA Controller IDE (Tolapai) */
{ 0x8086, 0x5028, PCI_ANY_ID, PCI_ANY_ID, 0, 0, tolapai_sata_ahci },
+ /* SATA Controller IDE (ICH10) */
+ { 0x8086, 0x3a00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ /* SATA Controller IDE (ICH10) */
+ { 0x8086, 0x3a06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (ICH10) */
+ { 0x8086, 0x3a20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ /* SATA Controller IDE (ICH10) */
+ { 0x8086, 0x3a26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
{ } /* terminate list */
};
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH 2.6.24] ata_piix: IDE mode SATA patch for Intel ICH10 DeviceID's
2008-01-29 1:36 [PATCH 2.6.24] ata_piix: IDE mode SATA patch for Intel ICH10 DeviceID's Jason Gaston
@ 2008-01-29 17:14 ` Jeff Garzik
2008-01-29 18:03 ` Gaston, Jason D
0 siblings, 1 reply; 4+ messages in thread
From: Jeff Garzik @ 2008-01-29 17:14 UTC (permalink / raw)
To: Jason Gaston; +Cc: linux-ide, linux-kernel, htejun
Jason Gaston wrote:
> This patch adds the Intel ICH10 IDE mode SATA Controller DeviceID's.
>
> Signed-off-by: Jason Gaston <jason.d.gaston@intel.com>
>
> --- linux-2.6.24/drivers/ata/ata_piix.c.orig 2008-01-24 14:58:37.000000000 -0800
> +++ linux-2.6.24/drivers/ata/ata_piix.c 2008-01-28 14:58:22.000000000 -0800
> @@ -263,6 +263,14 @@
> { 0x8086, 0x292e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
> /* SATA Controller IDE (Tolapai) */
> { 0x8086, 0x5028, PCI_ANY_ID, PCI_ANY_ID, 0, 0, tolapai_sata_ahci },
> + /* SATA Controller IDE (ICH10) */
> + { 0x8086, 0x3a00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
> + /* SATA Controller IDE (ICH10) */
> + { 0x8086, 0x3a06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
> + /* SATA Controller IDE (ICH10) */
> + { 0x8086, 0x3a20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
> + /* SATA Controller IDE (ICH10) */
> + { 0x8086, 0x3a26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
can these do AHCI mode without losing any PATA ports?
if so, I would prefer to always drive the hardware in AHCI mode, if it
is capable of doing so.
^ permalink raw reply [flat|nested] 4+ messages in thread* RE: [PATCH 2.6.24] ata_piix: IDE mode SATA patch for Intel ICH10 DeviceID's
2008-01-29 17:14 ` Jeff Garzik
@ 2008-01-29 18:03 ` Gaston, Jason D
0 siblings, 0 replies; 4+ messages in thread
From: Gaston, Jason D @ 2008-01-29 18:03 UTC (permalink / raw)
To: Jeff Garzik; +Cc: linux-ide, linux-kernel, htejun
>-----Original Message-----
>From: Jeff Garzik [mailto:jgarzik@pobox.com]
>Sent: Tuesday, January 29, 2008 9:14 AM
>To: Gaston, Jason D
>Cc: linux-ide@vger.kernel.org; linux-kernel@vger.kernel.org;
>htejun@gmail.com
>Subject: Re: [PATCH 2.6.24] ata_piix: IDE mode SATA patch for Intel
ICH10
>DeviceID's
>
>Jason Gaston wrote:
>> This patch adds the Intel ICH10 IDE mode SATA Controller DeviceID's.
>>
>> Signed-off-by: Jason Gaston <jason.d.gaston@intel.com>
>>
>> --- linux-2.6.24/drivers/ata/ata_piix.c.orig 2008-01-24
>14:58:37.000000000 -0800
>> +++ linux-2.6.24/drivers/ata/ata_piix.c 2008-01-28
14:58:22.000000000 -
>0800
>> @@ -263,6 +263,14 @@
>> { 0x8086, 0x292e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci
},
>> /* SATA Controller IDE (Tolapai) */
>> { 0x8086, 0x5028, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
tolapai_sata_ahci },
>> + /* SATA Controller IDE (ICH10) */
>> + { 0x8086, 0x3a00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci
},
>> + /* SATA Controller IDE (ICH10) */
>> + { 0x8086, 0x3a06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata
},
>> + /* SATA Controller IDE (ICH10) */
>> + { 0x8086, 0x3a20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci
},
>> + /* SATA Controller IDE (ICH10) */
>> + { 0x8086, 0x3a26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata
},
>
>can these do AHCI mode without losing any PATA ports?
>
>if so, I would prefer to always drive the hardware in AHCI mode, if it
>is capable of doing so.
They do not have PATA.
Jason
^ permalink raw reply [flat|nested] 4+ messages in thread* RE: [PATCH 2.6.24] ata_piix: IDE mode SATA patch for Intel ICH10 DeviceID's
@ 2008-01-29 18:03 ` Gaston, Jason D
0 siblings, 0 replies; 4+ messages in thread
From: Gaston, Jason D @ 2008-01-29 18:03 UTC (permalink / raw)
To: Jeff Garzik; +Cc: linux-ide, linux-kernel, htejun
>-----Original Message-----
>From: Jeff Garzik [mailto:jgarzik@pobox.com]
>Sent: Tuesday, January 29, 2008 9:14 AM
>To: Gaston, Jason D
>Cc: linux-ide@vger.kernel.org; linux-kernel@vger.kernel.org;
>htejun@gmail.com
>Subject: Re: [PATCH 2.6.24] ata_piix: IDE mode SATA patch for Intel
ICH10
>DeviceID's
>
>Jason Gaston wrote:
>> This patch adds the Intel ICH10 IDE mode SATA Controller DeviceID's.
>>
>> Signed-off-by: Jason Gaston <jason.d.gaston@intel.com>
>>
>> --- linux-2.6.24/drivers/ata/ata_piix.c.orig 2008-01-24
>14:58:37.000000000 -0800
>> +++ linux-2.6.24/drivers/ata/ata_piix.c 2008-01-28
14:58:22.000000000 -
>0800
>> @@ -263,6 +263,14 @@
>> { 0x8086, 0x292e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci
},
>> /* SATA Controller IDE (Tolapai) */
>> { 0x8086, 0x5028, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
tolapai_sata_ahci },
>> + /* SATA Controller IDE (ICH10) */
>> + { 0x8086, 0x3a00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci
},
>> + /* SATA Controller IDE (ICH10) */
>> + { 0x8086, 0x3a06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata
},
>> + /* SATA Controller IDE (ICH10) */
>> + { 0x8086, 0x3a20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci
},
>> + /* SATA Controller IDE (ICH10) */
>> + { 0x8086, 0x3a26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata
},
>
>can these do AHCI mode without losing any PATA ports?
>
>if so, I would prefer to always drive the hardware in AHCI mode, if it
>is capable of doing so.
They do not have PATA.
Jason
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2008-01-29 18:05 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-01-29 1:36 [PATCH 2.6.24] ata_piix: IDE mode SATA patch for Intel ICH10 DeviceID's Jason Gaston
2008-01-29 17:14 ` Jeff Garzik
2008-01-29 18:03 ` Gaston, Jason D
2008-01-29 18:03 ` Gaston, Jason D
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.