From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rene Herman Subject: Re: [REPOST] opti93x: conversion to use cs4231 library Date: Wed, 30 Jan 2008 01:43:02 +0100 Message-ID: <479FC816.5060405@keyaccess.nl> References: <20080126104411.50c2035f.krzysztof.h1@poczta.fm> <479E804E.7070500@keyaccess.nl> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from smtpq2.tilbu1.nb.home.nl (smtpq2.tilbu1.nb.home.nl [213.51.146.201]) by alsa0.perex.cz (Postfix) with ESMTP id 6F03110393D for ; Wed, 30 Jan 2008 01:42:35 +0100 (CET) In-Reply-To: <479E804E.7070500@keyaccess.nl> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Takashi Iwai Cc: Alsa-devel , Krzysztof Helt List-Id: alsa-devel@alsa-project.org On 29-01-08 02:24, Rene Herman wrote: > Needs this additionally to compile (against 2.6.24 at least, but this is > normally always required). Will test tomorrow. 931 and 933 work and 930 (a non-PnP chip) is being a royal pain in the ass again. With the new code, I haven't yet been able to get it to work -- no IRQ is firing. However, I also experienced this _once_ with the old driver so I'm not sure what's going on. When I now try to reproduce with the old one, I can't. Maybe a timing difference. Will need further testing -- I have no time in the next few days. Rene.