Re: [PATCH 1/2] Add RapidIO node into MPC8641HPCN dts file

[Jon Loeliger <jdl@freescale.com>]

Zhang Wei wrote:
> Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
> ---
>  arch/powerpc/boot/dts/mpc8641_hpcn.dts |   13 +++++++++++++
>  1 files changed, 13 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
> index 556a9ca..1a0fce5 100644
> --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
> +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
> @@ -25,6 +25,7 @@
>  		serial1 = &serial1;
>  		pci0 = &pci0;
>  		pci1 = &pci1;
> +		rapidio0 = &rapidio0;
>  	};
>  
>  	cpus {
> @@ -499,4 +500,16 @@
>  				  0 00100000>;
>  		};
>  	};
> +
> +	rapidio0: rapidio@f80c0000 {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		compatible = "fsl,rapidio-delta";
> +		reg = <f80c0000 20000>;
> +		ranges = <0 0 c0000000 0 20000000>;
> +		interrupt-parent = <&mpic>;
> +		/* err_irq bell_outb_irq bell_inb_irq
> +			msg1_tx_irq msg1_rx_irq	msg2_tx_irq msg2_rx_irq */
> +		interrupts = <30 2 31 2 32 2 35 2 36 2 37 2 38 2>;
> +	};
>  };

The 8641 DTS file has been converted to /dts-v1/ format now.
Please rewrite this patch with explicit hex numbers for
addresses, even if 0x0, and decimal for IRQs.

Thanks,
jdl