From: Bill Davidsen <davidsen@tmr.com>
To: Berni <wstripes@gmx.at>, Linux RAID <linux-raid@vger.kernel.org>
Subject: Re: raid problem: after every reboot /dev/sdb1 is removed?
Date: Sun, 03 Feb 2008 10:34:13 -0500 [thread overview]
Message-ID: <47A5DEF5.5040202@tmr.com> (raw)
In-Reply-To: <20080203023001.066852a6@berni>
Berni wrote:
> Hi
>
> I created the raid arrays during install with the text-installer-cd.
> So first the raid array was created and then the system was installed on it.
>
>
> I don't have a extra /boot partition its on the root (/) partition and the root is the md0 in the raid. Every partition for ubuntu (also swap) is in the raid.
>
> What exactly means rerunning grub? (to put both hdd into the mbr)?
> I can't find the "mkinitrd" into ubuntu. I made a update-initramfs but it didn't help.
>
>
I think you need some ubuntu guru to help, I always create a small raid1
for /boot and then use other arrays for whatever the system is doing. I
don't know if ubuntu uses mkinitrd or what, but it clearly didn't get it
right without a little help from you.
> thanks
>
How about some input, ubuntu users (or Debian, isn't ubuntu really Debian?).
>
> On Sat, 02 Feb 2008 14:47:50 -0500
> Bill Davidsen <davidsen@tmr.com> wrote:
>
>
>> Berni wrote:
>>
>>> Hi!
>>>
>>> I have the following problem with my softraid (raid 1). I'm running
>>> Ubuntu 7.10 64bit with kernel 2.6.22-14-generic.
>>>
>>> After every reboot my first boot partition in md0 is not synchron. One
>>> of the disks (the sdb1) is removed.
>>> After a resynch every partition is synching. But after a reboot the
>>> state is "removed".
>>>
>>> The disks are new and both seagate 250gb with exactly the same partition table.
>>>
>>>
>>>
>> Did you create the raid arrays and then install on them? Or add them
>> after the fact? I have seen this type of problem when the initrd doesn't
>> start the array before pivotroot, usually because the raid capabilities
>> aren't in the boot image. In that case rerunning grub and mkinitrd may help.
>>
>> I run raid on Redhat distributions, and some Slackware, so I can't speak
>> for Ubuntu from great experience, but that's what it sounds like. When
>> you boot, is the /boot mounted on a degraded array or on the raw partition?
>>
--
Bill Davidsen <davidsen@tmr.com>
"Woe unto the statesman who makes war without a reason that will still
be valid when the war is over..." Otto von Bismark
prev parent reply other threads:[~2008-02-03 15:34 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-01 12:52 raid problem: after every reboot /dev/sdb1 is removed? Berni
2008-02-01 13:46 ` Greg Cormier
2008-02-01 17:22 ` Berni
2008-02-02 2:32 ` Neil Brown
2008-02-02 19:47 ` Bill Davidsen
[not found] ` <20080203023001.066852a6@berni>
2008-02-03 15:34 ` Bill Davidsen [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47A5DEF5.5040202@tmr.com \
--to=davidsen@tmr.com \
--cc=linux-raid@vger.kernel.org \
--cc=wstripes@gmx.at \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.