From: Eric Sandeen <sandeen@sandeen.net>
To: Lachlan McIlroy <lachlan@sgi.com>
Cc: xfs@oss.sgi.com
Subject: [PATCH 1/2] - unwrap makefiles (mainline only)
Date: Fri, 08 Feb 2008 23:09:39 -0600 [thread overview]
Message-ID: <47AD3593.1060700@sandeen.net> (raw)
In-Reply-To: <47AD284F.7080603@sandeen.net>
kernel.org git tree "port" of:
Remove Makefile wrappers in XFS
Makefile (and Kbuild) would include Makefile-linux-26
I doubt XFS will really still compile on 2.4; so drop that. This
moves Makefile-linux-26 into Makefile and drops Kbuild.
Also having wrappers as both Kbuild and Makefile seemed redundant
anyways.
The patch is relatively large because it renames a file, but
no functional changes.
Signed-off-by: Andi Kleen <ak@suse.de <mailto:ak@suse.de>>
Merge of xfs-linux-melb:xfs-kern:29781a by kenmcd.
Remove Makefile wrappers in XFS.
Index: linux-2.6/fs/xfs/Kbuild
===================================================================
--- linux-2.6.orig/fs/xfs/Kbuild
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# The xfs people like to share Makefile with 2.6 and 2.4.
-# Utilise file named Kbuild file which has precedence over Makefile.
-#
-
-include $(srctree)/$(obj)/Makefile-linux-2.6
Index: linux-2.6/fs/xfs/Makefile
===================================================================
--- linux-2.6.orig/fs/xfs/Makefile
+++ linux-2.6/fs/xfs/Makefile
@@ -1 +1,117 @@
-include $(TOPDIR)/fs/xfs/Makefile-linux-$(VERSION).$(PATCHLEVEL)
+#
+# Copyright (c) 2000-2005 Silicon Graphics, Inc.
+# All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+
+EXTRA_CFLAGS += -Ifs/xfs -Ifs/xfs/linux-2.6 -funsigned-char
+
+XFS_LINUX := linux-2.6
+
+ifeq ($(CONFIG_XFS_DEBUG),y)
+ EXTRA_CFLAGS += -g
+endif
+
+obj-$(CONFIG_XFS_FS) += xfs.o
+
+xfs-$(CONFIG_XFS_QUOTA) += $(addprefix quota/, \
+ xfs_dquot.o \
+ xfs_dquot_item.o \
+ xfs_trans_dquot.o \
+ xfs_qm_syscalls.o \
+ xfs_qm_bhv.o \
+ xfs_qm.o)
+
+ifeq ($(CONFIG_XFS_QUOTA),y)
+xfs-$(CONFIG_PROC_FS) += quota/xfs_qm_stats.o
+endif
+
+xfs-$(CONFIG_XFS_RT) += xfs_rtalloc.o
+xfs-$(CONFIG_XFS_POSIX_ACL) += xfs_acl.o
+xfs-$(CONFIG_PROC_FS) += $(XFS_LINUX)/xfs_stats.o
+xfs-$(CONFIG_SYSCTL) += $(XFS_LINUX)/xfs_sysctl.o
+xfs-$(CONFIG_COMPAT) += $(XFS_LINUX)/xfs_ioctl32.o
+
+
+xfs-y += xfs_alloc.o \
+ xfs_alloc_btree.o \
+ xfs_attr.o \
+ xfs_attr_leaf.o \
+ xfs_bit.o \
+ xfs_bmap.o \
+ xfs_bmap_btree.o \
+ xfs_btree.o \
+ xfs_buf_item.o \
+ xfs_da_btree.o \
+ xfs_dir2.o \
+ xfs_dir2_block.o \
+ xfs_dir2_data.o \
+ xfs_dir2_leaf.o \
+ xfs_dir2_node.o \
+ xfs_dir2_sf.o \
+ xfs_error.o \
+ xfs_extfree_item.o \
+ xfs_filestream.o \
+ xfs_fsops.o \
+ xfs_ialloc.o \
+ xfs_ialloc_btree.o \
+ xfs_iget.o \
+ xfs_inode.o \
+ xfs_inode_item.o \
+ xfs_iomap.o \
+ xfs_itable.o \
+ xfs_dfrag.o \
+ xfs_log.o \
+ xfs_log_recover.o \
+ xfs_mount.o \
+ xfs_mru_cache.o \
+ xfs_rename.o \
+ xfs_trans.o \
+ xfs_trans_ail.o \
+ xfs_trans_buf.o \
+ xfs_trans_extfree.o \
+ xfs_trans_inode.o \
+ xfs_trans_item.o \
+ xfs_utils.o \
+ xfs_vfsops.o \
+ xfs_vnodeops.o \
+ xfs_rw.o \
+ xfs_dmops.o \
+ xfs_qmops.o
+
+xfs-$(CONFIG_XFS_TRACE) += xfs_dir2_trace.o
+
+# Objects in linux/
+xfs-y += $(addprefix $(XFS_LINUX)/, \
+ kmem.o \
+ xfs_aops.o \
+ xfs_buf.o \
+ xfs_export.o \
+ xfs_file.o \
+ xfs_fs_subr.o \
+ xfs_globals.o \
+ xfs_ioctl.o \
+ xfs_iops.o \
+ xfs_lrw.o \
+ xfs_super.o \
+ xfs_vnode.o)
+
+# Objects in support/
+xfs-y += $(addprefix support/, \
+ debug.o \
+ uuid.o)
+
+xfs-$(CONFIG_XFS_TRACE) += support/ktrace.o
+
Index: linux-2.6/fs/xfs/Makefile-linux-2.6
===================================================================
--- linux-2.6.orig/fs/xfs/Makefile-linux-2.6
+++ /dev/null
@@ -1,117 +0,0 @@
-#
-# Copyright (c) 2000-2005 Silicon Graphics, Inc.
-# All Rights Reserved.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it would be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-#
-
-EXTRA_CFLAGS += -Ifs/xfs -Ifs/xfs/linux-2.6 -funsigned-char
-
-XFS_LINUX := linux-2.6
-
-ifeq ($(CONFIG_XFS_DEBUG),y)
- EXTRA_CFLAGS += -g
-endif
-
-obj-$(CONFIG_XFS_FS) += xfs.o
-
-xfs-$(CONFIG_XFS_QUOTA) += $(addprefix quota/, \
- xfs_dquot.o \
- xfs_dquot_item.o \
- xfs_trans_dquot.o \
- xfs_qm_syscalls.o \
- xfs_qm_bhv.o \
- xfs_qm.o)
-
-ifeq ($(CONFIG_XFS_QUOTA),y)
-xfs-$(CONFIG_PROC_FS) += quota/xfs_qm_stats.o
-endif
-
-xfs-$(CONFIG_XFS_RT) += xfs_rtalloc.o
-xfs-$(CONFIG_XFS_POSIX_ACL) += xfs_acl.o
-xfs-$(CONFIG_PROC_FS) += $(XFS_LINUX)/xfs_stats.o
-xfs-$(CONFIG_SYSCTL) += $(XFS_LINUX)/xfs_sysctl.o
-xfs-$(CONFIG_COMPAT) += $(XFS_LINUX)/xfs_ioctl32.o
-
-
-xfs-y += xfs_alloc.o \
- xfs_alloc_btree.o \
- xfs_attr.o \
- xfs_attr_leaf.o \
- xfs_bit.o \
- xfs_bmap.o \
- xfs_bmap_btree.o \
- xfs_btree.o \
- xfs_buf_item.o \
- xfs_da_btree.o \
- xfs_dir2.o \
- xfs_dir2_block.o \
- xfs_dir2_data.o \
- xfs_dir2_leaf.o \
- xfs_dir2_node.o \
- xfs_dir2_sf.o \
- xfs_error.o \
- xfs_extfree_item.o \
- xfs_filestream.o \
- xfs_fsops.o \
- xfs_ialloc.o \
- xfs_ialloc_btree.o \
- xfs_iget.o \
- xfs_inode.o \
- xfs_inode_item.o \
- xfs_iomap.o \
- xfs_itable.o \
- xfs_dfrag.o \
- xfs_log.o \
- xfs_log_recover.o \
- xfs_mount.o \
- xfs_mru_cache.o \
- xfs_rename.o \
- xfs_trans.o \
- xfs_trans_ail.o \
- xfs_trans_buf.o \
- xfs_trans_extfree.o \
- xfs_trans_inode.o \
- xfs_trans_item.o \
- xfs_utils.o \
- xfs_vfsops.o \
- xfs_vnodeops.o \
- xfs_rw.o \
- xfs_dmops.o \
- xfs_qmops.o
-
-xfs-$(CONFIG_XFS_TRACE) += xfs_dir2_trace.o
-
-# Objects in linux/
-xfs-y += $(addprefix $(XFS_LINUX)/, \
- kmem.o \
- xfs_aops.o \
- xfs_buf.o \
- xfs_export.o \
- xfs_file.o \
- xfs_fs_subr.o \
- xfs_globals.o \
- xfs_ioctl.o \
- xfs_iops.o \
- xfs_lrw.o \
- xfs_super.o \
- xfs_vnode.o)
-
-# Objects in support/
-xfs-y += $(addprefix support/, \
- debug.o \
- uuid.o)
-
-xfs-$(CONFIG_XFS_TRACE) += support/ktrace.o
-
next prev parent reply other threads:[~2008-02-09 5:09 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-08 2:27 [GIT PULL] XFS update for 2.6.25 Lachlan McIlroy
2008-02-09 4:13 ` Eric Sandeen
2008-02-09 4:56 ` Christoph Hellwig
2008-02-09 4:58 ` Eric Sandeen
2008-02-09 5:03 ` Christoph Hellwig
2008-02-09 5:09 ` Eric Sandeen [this message]
2008-02-09 5:13 ` [PATCH 2/2] fix up out of tree builds (mainline only) Eric Sandeen
2008-02-11 4:57 ` [GIT PULL] XFS update for 2.6.25 Lachlan McIlroy
2008-02-11 4:57 ` Eric Sandeen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47AD3593.1060700@sandeen.net \
--to=sandeen@sandeen.net \
--cc=lachlan@sgi.com \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.