From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sean MacLennan Date: Mon, 18 Feb 2008 18:15:14 +0000 Subject: Re: [lm-sensors] [PATCH] Add driver for AD7414 i2c temperature Message-Id: <47B9CB32.40709@seanm.ca> List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Jean Delvare wrote: > Hi Sean, > > On Sun, 17 Feb 2008 15:33:14 -0500, Sean MacLennan wrote: > >> I tried this driver and it didn't detect my ad7414 chip... the probe >> function is never called >> >> I am using the i2c-ibm_iic.c driver for the i2c bus and running 2.6.25-rc2. >> >> It works using a different version of the driver and the attach and >> detach methods. Could the ibm iic driver be missing something? >> > > Frank's driver is a "new-style" i2c driver. These drivers do not probe > the i2c adapters for supported chips automatically. Instead, platform > code should explicitly instantiate the I2C devices that are present on > the system. In the case of embedded designs, this is typically done by > calling i2c_register_board_info() in platform code. > That works, thanks! So the patch works for me. Cheers, Sean _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors