From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Daniele (Mastro)" Subject: Re: Notebook Toshiba satellite x200-21g with realtek snd-hda-intel audio device still not supported (codec ALC268) Date: Tue, 19 Feb 2008 16:55:02 +0100 Message-ID: <47BAFBD6.8050903@gmail.com> References: <47672BCB.9080608@gmail.com> <476912F3.8090609@gmail.com> <476A2BCC.4060109@gmail.com> <47727C6C.6080401@gmail.com> <1198815321.3732.229.camel@razman.gruemaster.com> <47B06DEF.4070609@gmail.com> <47B0D319.2000702@gmail.com> <47B23AB8.6000301@gmail.com> <47B5D230.4050402@gmail.com> <47B9C909.9010100@gmail.com> <47BAE549.2080009@gmail.com> <47BAEFB6.8040209@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mu-out-0910.google.com (mu-out-0910.google.com [209.85.134.191]) by alsa0.perex.cz (Postfix) with ESMTP id 4C0E910392C for ; Tue, 19 Feb 2008 16:55:10 +0100 (CET) Received: by mu-out-0910.google.com with SMTP id i10so2075854mue.3 for ; Tue, 19 Feb 2008 07:55:09 -0800 (PST) In-Reply-To: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Takashi Iwai Cc: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org Takashi Iwai ha scritto: > The mixer setting? You should set "Digital Capture Volume" 50%, > corresponding to 0dB. The capture volume doesn't have to be too > high, too. oh.. i had to play a bit with alsamixer but finally i got a good result... my setting: - front mic boost = 50 (option: 0, 50, 100) - Capture enabled = 65 - Capture 1 disabled (see below) - Digital = 68 - Input Source = Front mic - Input Source 1 = Front mic (playback - see below) i've discovered some oddity: - i have 2 capture device.... (capture and capure 1) - the first one is *really* a capture device and work only if i select "front mic", not "mic" - the second one is the mic playback device... and again it work only if i use "front mic" should it work this way? > The vref level could be a different one depending on the mic device > you are using. But VREF80 is OK in most cases. i don't know what "VREF80" but now capturing with mic work... now remaining problems: - midi hardware (my card should have it): i've loaded snd-seq-midi module and i've an alsa hardware device but i can't play midi files (they play but i hear nothing...). i've created another alsa-info log taken with the snd-seq-midi loaded http://pastebin.ca/909849 - no "mux","mix", or "aux" record source to directly record from desktop - surround still doesn't work i should have surround $ aplay -L default:CARD=Intel HDA Intel, ALC268 Analog Default Audio Device front:CARD=Intel,DEV=0 HDA Intel, ALC268 Analog Front speakers surround40:CARD=Intel,DEV=0 HDA Intel, ALC268 Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=Intel,DEV=0 HDA Intel, ALC268 Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Intel,DEV=0 HDA Intel, ALC268 Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Intel,DEV=0 HDA Intel, ALC268 Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Intel,DEV=0 HDA Intel, ALC268 Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers null Discard all samples (playback) or generate zero samples (capture) but trying speaker-test -c5 -Dplug:surround41 or any of that other devices produce this error: Playback device is plug:surround41 Stream parameters are 48000Hz, S16_LE, 5 channels Using 16 octaves of pink noise Playback open error: -16,Device or resource busy the last error repeat itself until i stop it (CTRL+C) and i hear nothing are some of this fixable? and can i help in some way fixing them? thanks again... A LOT! -- Daniele