From: "Daniele (Mastro)" <daniele.bilug@gmail.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org
Subject: Re: Notebook Toshiba satellite x200-21g with realtek snd-hda-intel audio device still not supported (codec ALC268)
Date: Tue, 19 Feb 2008 18:29:40 +0100 [thread overview]
Message-ID: <47BB1204.5010801@gmail.com> (raw)
In-Reply-To: <s5hir0kudkz.wl%tiwai@suse.de>
Takashi Iwai ha scritto:
>> - Digital = 68
>
> Keep this 50%. It's a digital attenuation/gain control and changing
> this makes no sense unless you have a digital mic without the hardware
> volume control.
if i put 50% there the mic it's a bit "low" with volume and i have to
spoke really near to it
(however sound is cleaner, lower but cleaner)
>> - Input Source = Front mic
>> - Input Source 1 = Front mic (playback - see below)
>
> Is "Front mic" the external mic jack? And the internal mic works as
> well?
"front mic" works as the jack in the front of my laptop
no internal mic doesn't work at all.. and i don't know if there's one to
be honest cause i never booted windows here
> The second capture could work independently, assigned to PCM#2.
sorry i think i didn't understand what do you mean..
so the behavior is "normal"? or it isn't? or it is "fixable" in some way?
with my previous laptop i used to have only 1 capture device and to
select if i want to use it only as playback, only as capture or both..
here i've to do this separately with 2 device.. it's not a big deal..
it's only strange
> No, you are fooled by marketing people. It has no MIDI hardware.
> It's a pure software thingy.
>
actually it say under "audio specification" for my notebook
Standard sonori supportati : MIDI support
which means:
Supported sound standard: MIDI support
you can read it here:
http://it.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=IT&toshibaShop=false&com.broadvision.session.new=Yes&PRODUCT_ID=137947
(i don't know if this page will still visible in future)
>> - no "mux","mix", or "aux" record source to directly record from desktop
>
> The codec has no function to record from the mixer amp (some other
> Realtek codecs have, though). It's again a software issue.
ok.. so i've no way to "record what I'm listening" right? (no way other
that using a microphone off course)
> No, you don't. aplay just shows the available "configuration" but it
> the device doesn't support surrounds.
oh ok :)
do you know how can i test subwoofer?
it seems active but if there's a way to actually "test" it would be nice
sorry for me bothering you :)
i hope one day I'll be able to pay back your kindness
--
Daniele
next prev parent reply other threads:[~2008-02-19 17:29 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-18 2:09 Notebook Toshiba satellite x200-21g with realtek snd-hda-intel audio device still not supported (codec ALC268) Daniele (Mastro)
2007-12-19 12:47 ` Daniele (Mastro)
2007-12-20 8:46 ` Daniele (Mastro)
2007-12-20 14:03 ` Takashi Iwai
2007-12-21 0:04 ` Daniele (Mastro)
2007-12-21 1:10 ` Tobin Davis
2007-12-21 10:14 ` Daniele (Mastro)
2007-12-24 20:40 ` Daniele (Mastro)
2007-12-26 16:08 ` Daniele (Mastro)
2007-12-26 21:13 ` Tobin Davis
2007-12-28 4:15 ` Tobin Davis
2008-02-11 15:46 ` Daniele (Mastro)
2008-02-11 16:09 ` Takashi Iwai
2008-02-11 16:31 ` Takashi Iwai
2008-02-11 22:58 ` Daniele (Mastro)
2008-02-12 10:23 ` Takashi Iwai
2008-02-13 0:32 ` Daniele (Mastro)
2008-02-15 17:56 ` Daniele (Mastro)
2008-02-18 18:06 ` Daniele (Mastro)
2008-02-19 14:02 ` Takashi Iwai
2008-02-19 14:18 ` Daniele (Mastro)
2008-02-19 14:34 ` Takashi Iwai
2008-02-19 15:03 ` Daniele (Mastro)
2008-02-19 15:10 ` Takashi Iwai
2008-02-19 15:55 ` Daniele (Mastro)
2008-02-19 16:15 ` Takashi Iwai
2008-02-19 17:29 ` Daniele (Mastro) [this message]
2008-02-19 18:16 ` Tobin Davis
2008-02-19 18:52 ` Daniele (Mastro)
2008-02-19 19:01 ` Tobin Davis
-- strict thread matches above, loose matches on Subject: below --
2007-12-16 14:35 Daniele (Mastro)
2007-12-17 10:03 ` Takashi Iwai
2007-12-17 14:13 ` Daniele (Mastro)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47BB1204.5010801@gmail.com \
--to=daniele.bilug@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.