Re: MPC8641D PCI-Express error

[Marco Stornelli <marco.stornelli@coritel.it>]

Jon Loeliger ha scritto:
> Timur Tabi wrote:
>> Marco Stornelli wrote:
>>
>>> No, it didn't. I have the same problem even with the 2.6.18 plus the
>>> 2.6.24 PCI-Express code. I performed this action because I can't change
>>> kernel version but I can modify it.
>>
>> Please try 2.6.24 (or even better, 2.6.25-rc2).  You may have done
>> something wrong in back-porting the code to 2.6.18.  There's no reason
>> why you can't at least try the latest version of the code for testing
>> purposes, even if you can't use it in production.
>>
> 
> Also, once you back-ported it and all the DTS changes, and all
> the fsl_soc.c changes needed and , and, and otherwise made it
> look _like_, 2.6.24 but still called it 2.6.18, after all that,
> can you remind us what was the error or failure mode that you saw?
> 
> jdl
> 
> 

When I try to read some register from my FPGA (virtex5) I have this bus
error:

Machine check in kernel mode.
Caused by (from SRR1=149030): Transfer error ack signal
Oops: Machine check, sig: 7 [#1]
PREEMPT SMP NR_CPUS=2
Modules linked in: virtex5
LTT NESTING LEVEL : 0
NIP: F108019C LR: F1080198 CTR: 00000001
REGS: c044dd60 TRAP: 0200   Not tainted      (2.6.18-mpc8641d_hpcn)
MSR: 00149030 <EE,ME,IR,DR>  CR: 22000222  XER: 00000000
TASK = c20e9990[568] 'insmod' THREAD: c044c000 CPU: 0
GPR00: F1080198 C044DE10 C20E9990 0000002E 80000000 FFFFFFFF 00008000
00002EA3
GPR08: C20E9990 00000000 C04C0220 C044C000 22000222 1001956C 00000000
00000000
GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000
GPR24: 3000EAA0 7FD6FDC0 00000000 C045FCC0 F107E594 F10A0000 00000000
C2036000
NIP [F108019C] virtex5_probe+0x130/0x1c4 [virtex5]
LR [F1080198] virtex5_probe+0x12c/0x1c4 [virtex5]
Call Trace:
[C044DE10] [F1080198] virtex5_probe+0x12c/0x1c4 [virtex5] (unreliable)
[C044DE30] [C01D2A58] pci_device_probe+0x84/0xbc
[C044DE50] [C0213754] driver_probe_device+0x60/0x118
[C044DE70] [C0213890] __driver_attach+0x84/0x88
[C044DE90] [C02130F4] bus_for_each_dev+0x58/0x94
[C044DEC0] [C02135D4] driver_attach+0x24/0x34
[C044DED0] [C0212AC8] bus_add_driver+0x88/0x164
[C044DEF0] [C021397C] driver_register+0x70/0xb8
[C044DF00] [C01D284C] __pci_register_driver+0x64/0x98
[C044DF10] [F1080030] init_module+0x30/0x6c [virtex5]
[C044DF20] [C004CBFC] sys_init_module+0xc8/0x25c
[C044DF40] [C0011358] ret_from_syscall+0x0/0x38
--- Exception: c00 at 0xff6de0c
    LR = 0x10000de4
Instruction dump:
40820060 3c60f108 3863cea0 48000311 807f0238 3c800001 48000395 7c7d1b78
3c60f108 3863ced4 480002f5 809d0000 <3c60f108> 3863cf04 480002e5 3c60f108