Re: [PATCH] [POWERPC] 8xx: timebase frequency should not depend on bus-frequency

[Scott Wood <scottwood@freescale.com>]

Anton Vorontsov wrote:
> On Thu, Feb 21, 2008 at 01:48:23PM -0600, Scott Wood wrote:
>> Anton Vorontsov wrote:
>>> diff --git a/arch/powerpc/platforms/8xx/m8xx_setup.c 
>>> b/arch/powerpc/platforms/8xx/m8xx_setup.c
>>> index 184f998..0d9f75c 100644
>>> --- a/arch/powerpc/platforms/8xx/m8xx_setup.c
>>> +++ b/arch/powerpc/platforms/8xx/m8xx_setup.c
>>> @@ -111,17 +111,12 @@ void __init mpc8xx_calibrate_decr(void)
>>>
>>> 	/* Processor frequency is MHz.
>>> 	 */
>>> -	ppc_tb_freq = 50000000;
>>> -	if (!get_freq("bus-frequency", &ppc_tb_freq)) {
>>> -		printk(KERN_ERR "WARNING: Estimating decrementer frequency "
>>> -		                "(not found)\n");
>>> -	}
>>> -	ppc_tb_freq /= 16;
>>> 	ppc_proc_freq = 50000000;
>>> 	if (!get_freq("clock-frequency", &ppc_proc_freq))
>>> 		printk(KERN_ERR "WARNING: Estimating processor frequency "
>>> 		                "(not found)\n");
>>>
>>> +	ppc_tb_freq = ppc_proc_freq / 16;
>> Shouldn't we just use the timebase-frequency property?
> 
> Nope. Most u-boots currently do not setup timebase-frequency, and if
> they are setting it up, they're doing it wrong, in sense that Linux
> overwrites timebase setup (yeah, in this regard MPC8xx is special).

Current u-boots don't support device trees at all on 8xx.  The most 
recent 8xx FDT patch I saw called get_tbclk() to fill in 
timebase-frequency; does get_tbclk() not work?

Obviously, when booting with a cuImage we can't use u-boot's value, 
since it's not in the bd_t.  In that case, we should fix the wrapper's 
calculation of the timebase frequency.

-Scott