From: Gabriel C <nix.or.die@googlemail.com>
To: Dave Airlie <airlied@linux.ie>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Gabriel C <crazy@frugalware.org>
Subject: Re: modular intel-agp does not work on my box
Date: Fri, 22 Feb 2008 04:27:33 +0100 [thread overview]
Message-ID: <47BE4125.3080503@googlemail.com> (raw)
In-Reply-To: <47BE32C7.5060008@googlemail.com>
Gabriel C wrote:
> Dave Airlie wrote:
>>> Hi,
>>>
>>> When building agp* modular ( CONFIG_AGP=y/m and CONFIG_AGP_INTEL=m ) intel-agp does nothing on my box
>>> ( Dell Precision WorkStation 530 MT ) chipset is not being detected.
>>>
>>> Building both Y fixes that and agpgart works and also detects my chipset.
>> Have you got EDAC modules built as well? they might be taking ownership
>> when they shouldn't..
>>
>
> Yes I have EDAC built modular. I will build latest git without EDAC and agp modular
> and let you know if that fixes ( workarounds ;) ) the problem.
You are right without EDAC built , agp modular does work fine. I'm on 2.6.25-rc2-00477-g1a4c6be right now.
So it is an EDAC bug ?
>
>>> ..
>>>
>>> Linux agpgart interface v0.102
>>> agpgart: Detected an Intel i860 Chipset.
>>> agpgart: AGP aperture is 256M @ 0xe0000000
>>>
>>> ..
>>>
>>> Also I've tested kernel 2.6.24.2 and 2.6.25-rc2 both with same result.
>>>
>>> lspci -vvvxxx output :
>>>
>>> 00:00.0 Host bridge: Intel Corporation 82860 860 (Wombat) Chipset Host Bridge (MCH) (rev 04)
>>> Subsystem: Dell Unknown device 00d8
>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ INTx-
>>> Latency: 0
>>> Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
>>> Capabilities: [a0] AGP version 2.0
>>> Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
>>> Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW+ Rate=x4
>>> Kernel driver in use: agpgart-intel
>>> Kernel modules: i82860_edac
>>> 00: 86 80 31 25 06 01 90 a0 04 00 00 06 00 00 00 00
>>> 10: 08 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00
>>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 d8 00
>>> 30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
>>> 40: d4 d4 92 80 80 80 80 80 80 80 80 80 80 80 80 80
>>> 50: 05 6b 02 00 00 00 00 00 00 10 11 11 01 00 11 11
>>> 60: 10 00 20 08 28 10 28 10 28 10 28 10 28 10 28 10
>>> 70: 28 10 28 10 28 10 28 10 28 10 28 10 28 10 28 10
>>> 80: 00 00 00 00 00 00 00 00 0f 00 00 00 00 00 00 00
>>> 90: 0b 00 0b 00 61 01 01 08 55 19 00 00 81 0a 38 00
>>> a0: 02 00 20 00 17 02 00 1f 14 03 00 00 00 00 00 00
>>> b0: 80 00 00 00 00 00 00 00 00 00 04 27 20 10 8b 00
>>> c0: 44 c0 50 11 00 28 00 00 00 00 00 00 03 00 00 00
>>> d0: 02 28 00 0e 03 00 00 33 af 09 31 b5 01 00 0b 00
>>> e0: 00 00 6a 00 00 00 00 01 2a 25 2b 33 07 00 00 00
>>> f0: 00 00 01 00 74 f8 30 80 38 0f 00 00 00 00 00 00
>>>
>>> 00:01.0 PCI bridge: Intel Corporation 82850 850 (Tehama) Chipset AGP Bridge (rev 04) (prog-if 00 [Normal decode])
>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>>> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>> Latency: 64
>>> Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
>>> I/O behind bridge: 0000e000-0000efff
>>> Memory behind bridge: ff800000-ff9fffff
>>> Prefetchable memory behind bridge: d0000000-dfffffff
>>> Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>>> BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
>>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>>> Kernel modules: shpchp
>>> 00: 86 80 32 25 07 01 a0 00 04 00 04 06 00 40 01 00
>>> 10: 00 00 00 00 00 00 00 00 00 01 01 40 e0 e0 a0 22
>>> 20: 80 ff 90 ff 00 d0 f0 df 00 00 00 00 00 00 00 00
>>> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0e 00
>>> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>
>>> 00:02.0 PCI bridge: Intel Corporation 82860 860 (Wombat) Chipset AGP Bridge (rev 04) (prog-if 00 [Normal decode])
>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>>> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>> Latency: 64
>>> Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
>>> I/O behind bridge: 0000d000-0000dfff
>>> Memory behind bridge: ff500000-ff7fffff
>>> Prefetchable memory behind bridge: fff00000-000fffff
>>> Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>>> BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>>> Kernel modules: shpchp
>>> 00: 86 80 33 25 07 01 a0 00 04 00 04 06 00 40 01 00
>>> 10: 00 00 00 00 00 00 00 00 00 02 03 00 d0 d0 a0 02
>>> 20: 50 ff 70 ff f0 ff 00 00 00 00 00 00 00 00 00 00
>>> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00
>>> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 50: 02 28 00 0e 23 14 00 00 00 00 00 00 00 00 00 00
>>> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>
>>> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 04) (prog-if 00 [Normal decode])
>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>>> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>> Latency: 0
>>> Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
>>> I/O behind bridge: 0000c000-0000cfff
>>> Memory behind bridge: ff300000-ff4fffff
>>> Prefetchable memory behind bridge: fff00000-000fffff
>>> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>>> BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>>> Kernel modules: shpchp
>>> 00: 86 80 4e 24 07 01 80 00 04 00 04 06 00 00 01 00
>>> 10: 00 00 00 00 00 00 00 00 00 04 04 40 c0 c0 80 22
>>> 20: 30 ff 40 ff f0 ff 00 00 00 00 00 00 00 00 00 00
>>> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00
>>> 40: 00 28 20 20 00 00 00 00 00 00 00 00 00 00 00 00
>>> 50: 06 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 70: 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 80: 00 00 92 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 90: 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> a0: 10 00 08 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> b0: 01 00 02 00 03 00 c0 00 00 00 00 00 00 00 00 00
>>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> f0: 00 00 00 00 00 00 00 00 47 0f 00 00 00 00 00 00
>>>
>>> 00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 04)
>>> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>>> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>> Latency: 0
>>> Kernel modules: intel-rng, iTCO_wdt
>>> 00: 86 80 40 24 0f 00 80 02 04 00 01 06 00 00 80 00
>>> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 40: 01 08 00 00 10 00 00 00 00 00 00 00 00 00 00 00
>>> 50: 00 00 00 00 00 00 00 00 81 08 00 00 10 00 00 00
>>> 60: 8b 89 80 8b 90 00 00 00 80 80 8b 84 00 00 00 00
>>> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 90: df fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> a0: 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> b0: 00 00 00 00 00 00 00 00 00 00 40 00 00 00 00 00
>>> c0: 00 00 00 00 04 08 00 00 00 00 00 00 01 00 00 00
>>> d0: 86 21 00 00 02 1f 00 00 00 00 00 00 00 00 00 00
>>> e0: 00 00 00 c0 01 0c 04 14 33 22 11 00 00 00 67 45
>>> f0: 00 00 40 00 00 00 00 00 47 0f 00 00 00 00 00 02
>>>
>>> 00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 Controller (rev 04) (prog-if 80 [Master])
>>> Subsystem: Dell Unknown device 00d8
>>> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>>> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>> Latency: 0
>>> Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
>>> Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
>>> Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
>>> Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
>>> Region 4: I/O ports at ffa0 [size=16]
>>> Kernel driver in use: ata_piix
>>> 00: 86 80 4b 24 05 00 80 02 04 80 01 01 00 00 00 00
>>> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 20: a1 ff 00 00 00 00 00 00 00 00 00 00 28 10 d8 00
>>> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 40: 07 e3 03 e3 00 00 00 00 05 00 01 02 00 00 00 00
>>> 50: 00 00 00 00 50 10 00 00 00 00 00 00 00 00 00 00
>>> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> f0: 00 00 00 00 00 00 00 00 47 0f 00 00 00 00 00 00
>>>
>>> 00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB Controller #1 (rev 04) (prog-if 00 [UHCI])
>>> Subsystem: Dell Unknown device 00d8
>>> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>>> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>> Latency: 0
>>> Interrupt: pin D routed to IRQ 17
>>> Region 4: I/O ports at ff80 [size=32]
>>> Kernel driver in use: uhci_hcd
>>> Kernel modules: uhci-hcd
>>> 00: 86 80 42 24 05 00 80 02 04 00 03 0c 00 00 00 00
>>> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 20: 81 ff 00 00 00 00 00 00 00 00 00 00 28 10 d8 00
>>> 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 04 00 00
>>> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> c0: 00 27 00 00 03 00 00 00 00 00 00 00 00 00 00 00
>>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> f0: 00 00 00 00 00 00 00 00 47 0f 00 00 00 00 00 00
>>>
>>> 00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus Controller (rev 04)
>>> Subsystem: Dell Unknown device 00d8
>>> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>>> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>> Interrupt: pin B routed to IRQ 19
>>> Region 4: I/O ports at bcd0 [size=16]
>>> Kernel driver in use: i801_smbus
>>> Kernel modules: i2c-i801
>>> 00: 86 80 43 24 01 00 80 02 04 00 05 0c 00 00 00 00
>>> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 20: d1 bc 00 00 00 00 00 00 00 00 00 00 28 10 d8 00
>>> 30: 00 00 00 00 00 00 00 00 00 00 00 00 09 02 00 00
>>> 40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> f0: 00 00 00 00 00 00 00 00 47 0f 00 00 00 00 00 00
>>>
>>> 00:1f.4 USB Controller: Intel Corporation 82801BA/BAM USB Controller #1 (rev 04) (prog-if 00 [UHCI])
>>> Subsystem: Dell Unknown device 00d8
>>> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>>> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>> Latency: 0
>>> Interrupt: pin C routed to IRQ 18
>>> Region 4: I/O ports at ff60 [size=32]
>>> Kernel driver in use: uhci_hcd
>>> Kernel modules: uhci-hcd
>>> 00: 86 80 44 24 05 00 80 02 04 00 03 0c 00 00 00 00
>>> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 20: 61 ff 00 00 00 00 00 00 00 00 00 00 28 10 d8 00
>>> 30: 00 00 00 00 00 00 00 00 00 00 00 00 04 03 00 00
>>> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> c0: 00 27 00 00 03 00 00 00 00 00 00 00 00 00 00 00
>>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> f0: 00 00 00 00 00 00 00 00 47 0f 00 00 00 00 00 00
>>>
>>> 00:1f.5 Multimedia audio controller: Intel Corporation 82801BA/BAM AC'97 Audio Controller (rev 04)
>>> Subsystem: Dell Unknown device 00d8
>>> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>>> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>> Latency: 0
>>> Interrupt: pin B routed to IRQ 19
>>> Region 0: I/O ports at b800 [size=256]
>>> Region 1: I/O ports at bc40 [size=64]
>>> Kernel driver in use: Intel ICH
>>> Kernel modules: snd-intel8x0
>>> 00: 86 80 45 24 05 00 80 02 04 00 01 04 00 00 00 00
>>> 10: 01 b8 00 00 41 bc 00 00 00 00 00 00 00 00 00 00
>>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 d8 00
>>> 30: 00 00 00 00 00 00 00 00 00 00 00 00 09 02 00 00
>>> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> f0: 00 00 00 00 00 00 00 00 47 0f 00 00 00 00 00 00
>>>
>>> 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] (prog-if 00 [VGA controller])
>>> Subsystem: Hightech Information System Ltd. Unknown device 8500
>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping+ SERR+ FastB2B- DisINTx-
>>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>> Latency: 255 (2000ns min), Cache Line Size: 64 bytes
>>> Interrupt: pin A routed to IRQ 20
>>> Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
>>> Region 1: I/O ports at ec00 [size=256]
>>> Region 2: Memory at ff8f0000 (32-bit, non-prefetchable) [size=64K]
>>> Expansion ROM at ff800000 [disabled] [size=128K]
>>> Capabilities: [58] AGP version 2.0
>>> Status: RQ=80 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
>>> Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW+ Rate=x4
>>> Capabilities: [50] Power Management version 2
>>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>> Kernel modules: fglrx, radeonfb
>>> 00: 02 10 48 4e a7 01 b0 02 00 00 00 03 10 ff 80 00
>>> 10: 08 00 00 d8 01 ec 00 00 00 00 8f ff 00 00 00 00
>>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 87 17 00 85
>>> 30: 00 00 00 c1 58 00 00 00 00 00 00 00 0b 01 08 00
>>> 40: 00 00 00 00 00 00 00 00 00 00 00 00 87 17 00 85
>>> 50: 01 00 02 06 00 00 00 00 02 50 20 00 17 02 00 4f
>>> 60: 14 03 00 1f 00 00 00 00 00 00 00 00 00 00 00 00
>>> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 80: 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>
>>> 01:00.1 Display controller: ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] (Secondary)
>>> Subsystem: Hightech Information System Ltd. Unknown device 8501
>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
>>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>> Latency: 64 (2000ns min), Cache Line Size: 64 bytes
>>> Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
>>> Region 1: Memory at ff8e0000 (32-bit, non-prefetchable) [size=64K]
>>> Capabilities: [50] Power Management version 2
>>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>> 00: 02 10 68 4e 87 00 b0 02 00 00 80 03 10 40 00 00
>>> 10: 08 00 00 d0 00 00 8e ff 00 00 00 00 00 00 00 00
>>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 87 17 01 85
>>> 30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 08 00
>>> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 50: 01 00 02 06 00 00 00 00 02 50 20 00 17 02 00 4f
>>> 60: 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>
>>> 02:1f.0 PCI bridge: Intel Corporation 82806AA PCI64 Hub PCI Bridge (rev 03) (prog-if 00 [Normal decode])
>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>>> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>> Latency: 0
>>> Bus: primary=02, secondary=03, subordinate=03, sec-latency=64
>>> I/O behind bridge: 0000d000-0000dfff
>>> Memory behind bridge: ff600000-ff7fffff
>> Prefetchable memory behind bridge: fff00000-000fffff
>>> Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>>> BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>>> Kernel modules: shpchp
>>> 00: 86 80 60 13 07 01 20 00 03 00 04 06 00 00 01 00
>>> 10: 00 00 00 00 00 00 00 00 02 03 03 40 d0 d0 a0 02
>>> 20: 60 ff 70 ff f0 ff 00 00 00 00 00 00 00 00 00 00
>>> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 80
>> 40: 00 68 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 50: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> f0: 00 00 00 00 00 00 00 00 30 0f 00 00 00 00 00 00
>>>
>>> 03:00.0 PIC: Intel Corporation 82806AA PCI64 Hub Advanced Programmable Interrupt Controller (rev 01) (prog-if 20 [IO(X)-APIC])
>>> Subsystem: Intel Corporation 82806AA PCI64 Hub APIC
>>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>> Region 0: Memory at ff6ff000 (32-bit, non-prefetchable) [disabled] [size=4K]
>>> 00: 86 80 61 11 00 00 00 00 01 20 00 08 00 00 80 00
>>> 10: 00 f0 6f ff 00 00 00 00 00 00 00 00 00 00 00 00
>>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 61 11
>>> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>
>>> 03:0e.0 SCSI storage controller: Adaptec AIC-7892P U160/m (rev 02)
>>> Subsystem: Dell Unknown device 00d8
>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>> Latency: 64 (10000ns min, 6250ns max), Cache Line Size: 64 bytes
>>> Interrupt: pin A routed to IRQ 16
>>> BIST result: 00
>>> Region 0: I/O ports at dc00 [disabled] [size=256]
>>> Region 1: Memory at ff6fe000 (64-bit, non-prefetchable) [size=4K]
>>> Expansion ROM at ff700000 [disabled] [size=128K]
>>> Capabilities: [dc] Power Management version 2
>>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>> Kernel driver in use: aic7xxx
>>> 00: 05 90 8f 00 16 01 b0 02 02 00 00 01 10 40 00 80
>>> 10: 01 dc 00 00 04 e0 6f ff 00 00 00 00 00 00 00 00
>>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 d8 00
>>> 30: 00 00 70 ff dc 00 00 00 00 00 00 00 0b 01 28 19
>>> 40: 80 04 00 80 00 00 00 00 00 00 00 00 00 00 00 00
>>> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 02 00
>>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>
>>> 04:0b.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
>>> Subsystem: Dell Unknown device 00d8
>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>> Latency: 64 (2500ns min, 2500ns max), Cache Line Size: 64 bytes
>>> Interrupt: pin A routed to IRQ 18
>>> Region 0: I/O ports at cc80 [size=128]
>>> Region 1: Memory at ff3ffc00 (32-bit, non-prefetchable) [size=128]
>>> Expansion ROM at ff300000 [disabled] [size=128K]
>>> Capabilities: [dc] Power Management version 2
>>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>>> Kernel driver in use: 3c59x
>>> Kernel modules: 3c59x
>>> 00: b7 10 00 92 17 01 10 02 78 00 00 02 10 40 00 00
>>> 10: 81 cc 00 00 00 fc 3f ff 00 00 00 00 00 00 00 00
>>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 d8 00
>>> 30: 00 00 40 ff dc 00 00 00 00 00 00 00 04 01 0a 0a
>>> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 02 fe
>>> e0: 00 40 00 68 00 00 00 00 00 00 00 00 00 00 00 00
>>> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>
>>> 04:0f.0 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
>>> Subsystem: NEC Corporation Hama USB 2.0 CardBus
>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>> Latency: 64 (250ns min, 10500ns max), Cache Line Size: 64 bytes
>>> Interrupt: pin A routed to IRQ 17
>>> Region 0: Memory at ff3fe000 (32-bit, non-prefetchable) [size=4K]
>>> Capabilities: [40] Power Management version 2
>>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
>>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>> Kernel driver in use: ohci_hcd
>>> Kernel modules: ohci-hcd
>>> 00: 33 10 35 00 16 01 10 02 41 10 03 0c 10 40 80 00
>>> 10: 00 e0 3f ff 00 00 00 00 00 00 00 00 00 00 00 00
>>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 33 10 35 00
>>> 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 01 2a
>>> 40: 01 00 02 7e 00 00 00 00 00 00 00 00 00 00 00 00
>>> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> e0: 05 33 30 c4 00 00 00 00 00 00 00 00 00 00 00 00
>>> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>
>>> 04:0f.1 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
>>> Subsystem: NEC Corporation Hama USB 2.0 CardBus
>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>> Latency: 64 (250ns min, 10500ns max), Cache Line Size: 64 bytes
>>> Interrupt: pin B routed to IRQ 20
>>> Region 0: Memory at ff3fd000 (32-bit, non-prefetchable) [size=4K]
>>> Capabilities: [40] Power Management version 2
>>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
>>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>> Kernel driver in use: ohci_hcd
>>> Kernel modules: ohci-hcd
>>> 00: 33 10 35 00 16 01 10 02 41 10 03 0c 10 40 00 00
>>> 10: 00 d0 3f ff 00 00 00 00 00 00 00 00 00 00 00 00
>>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 33 10 35 00
>>> 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 02 01 2a
>>> 40: 01 00 02 7e 00 00 00 00 00 00 00 00 00 00 00 00
>>> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>
>>> 04:0f.2 USB Controller: NEC Corporation USB 2.0 (rev 02) (prog-if 20 [EHCI])
>>> Subsystem: Unknown device 1838:1074
>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>> Latency: 64 (4000ns min, 8500ns max), Cache Line Size: 128 bytes
>>> Interrupt: pin C routed to IRQ 19
>>> Region 0: Memory at ff3ff800 (32-bit, non-prefetchable) [size=256]
>>> Capabilities: [40] Power Management version 2
>>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
>>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>> Kernel driver in use: ehci_hcd
>>> Kernel modules: ehci-hcd
>>> 00: 33 10 e0 00 16 01 10 02 02 20 03 0c 20 40 00 00
>>> 10: 00 f8 3f ff 00 00 00 00 00 00 00 00 00 00 00 00
>>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 38 18 74 10
>>> 30: 00 00 00 00 40 00 00 00 00 00 00 00 09 03 10 22
>>> 40: 01 00 02 7e 00 00 00 00 00 00 00 00 00 00 00 00
>>> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 60: 20 20 3f 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> e0: 05 33 30 c4 00 00 00 00 00 00 00 00 00 00 00 00
>>> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>
>>>
>>> Regards,
>>>
>>> Gabriel
>>>
>>>
>
next prev parent reply other threads:[~2008-02-22 3:27 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-22 1:15 modular intel-agp does not work on my box Gabriel C
2008-02-22 2:06 ` Dave Airlie
2008-02-22 2:26 ` Gabriel C
2008-02-22 3:27 ` Gabriel C [this message]
2008-02-22 4:19 ` Dave Jones
2008-02-23 8:03 ` Andrew Morton
2008-02-23 18:14 ` Dave Jones
2008-02-23 19:30 ` Gabriel C
2008-02-23 19:45 ` Dave Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47BE4125.3080503@googlemail.com \
--to=nix.or.die@googlemail.com \
--cc=airlied@linux.ie \
--cc=crazy@frugalware.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.