From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <47BED507.3080706@domain.hid> Date: Fri, 22 Feb 2008 14:58:31 +0100 From: Philippe Gerum MIME-Version: 1.0 References: <1203688198.3228.1.camel@domain.hid> In-Reply-To: <1203688198.3228.1.camel@domain.hid> Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Sender: Philippe Gerum Subject: Re: [Xenomai-help] Error while executioning xeno-test Reply-To: rpm@xenomai.org List-Id: Help regarding installation and common use of Xenomai List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: jwl Cc: xenomai@xenomai.org jwl wrote: > Hello, > > I have to install xenomai2.3.0 on a PPC architecture board. The current stable version is 2.4.2. 2.3.0 is not supported anymore. > I patched linux2.6.19.2 with adeos-ipipe-2.6.19-ppc-1.5-02.patch > and > built an Ramdisk with buildroot and ELDK. > > The kernel boot correctly. when I run /usr/xenomai/bin/xeno-test > I met this error: > > ------------------ > /usr/xenomai/bin/xeno-load: line 239: /usr/xenomai/bin/latency: > No such file or directory > ------------------ > Check your shell. /bin/sh should be on your ramdisk. > But latency exists and has the correct permissions. > > By the way I didn`t change anything in the kernel > configuration(Real-time sub-system -->) > > Does anyone know why this happend? > > Best Regards > William Jing > > > _______________________________________________ > Xenomai-help mailing list > Xenomai-help@domain.hid > https://mail.gna.org/listinfo/xenomai-help > -- Philippe.