From: Daniel Schroeder <sec@dschroeder.info>
To: linux-ide@vger.kernel.org
Subject: [MCP-55] IDE problem after bios update
Date: Fri, 22 Feb 2008 20:57:54 +0100 [thread overview]
Message-ID: <47BF2942.90901@dschroeder.info> (raw)
hi there,
this is an asus m2n32-sli deluxe with nvidia chipset. After updating the
bios from 1503 to 1701 following in dmesg, and ide drive doesn't work.
Kernel is 2.6.24.2
<dmesg>
..snip...
Feb 21 22:37:02 isla-magica Uniform Multi-Platform E-IDE driver
Revision: 7.00alpha2
Feb 21 22:37:02 isla-magica ide: Assuming 33MHz system bus speed for PIO
modes; override with idebus=xx
Feb 21 22:37:02 isla-magica NFORCE-MCP55: IDE controller (0x10de:0x036e
rev 0xa1) at PCI slot 0000:00:0c.0
Feb 21 22:37:02 isla-magica NFORCE-MCP55: not 100% native mode: will
probe irqs later
Feb 21 22:37:02 isla-magica NFORCE-MCP55: 0000:00:0c.0 (rev a1) UDMA133
controller
Feb 21 22:37:02 isla-magica ide0: BM-DMA at 0xf400-0xf407, BIOS
settings: hda:DMA, hdb:DMA
Feb 21 22:37:02 isla-magica NFORCE-MCP55: IDE port disabled
Feb 21 22:37:02 isla-magica Probing IDE interface ide0...
Feb 21 22:37:02 isla-magica hda: PLEXTOR DVDR PX-740A, ATAPI CD/DVD-ROM
drive
Feb 21 22:37:02 isla-magica hda: host max PIO5 wanted PIO255(auto-tune)
selected PIO4
Feb 21 22:37:02 isla-magica hda: UDMA/33 mode selected
Feb 21 22:37:02 isla-magica ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Feb 21 22:37:02 isla-magica hda: lost interrupt
Feb 21 22:37:02 isla-magica hda: task_in_intr: status=0x59 { DriveReady
SeekComplete DataRequest Error }
Feb 21 22:37:02 isla-magica hda: task_in_intr: error=0x00 { }
Feb 21 22:37:02 isla-magica ide: failed opcode was: 0xa1
Feb 21 22:37:02 isla-magica Probing IDE interface ide1...
Feb 21 22:37:02 isla-magica hda: status error: status=0x59 { DriveReady
SeekComplete DataRequest Error }
Feb 21 22:37:02 isla-magica hda: status error: error=0x00 { }
Feb 21 22:37:02 isla-magica ide: failed opcode was: unknown
Feb 21 22:37:02 isla-magica hda: drive not ready for command
Feb 21 22:37:02 isla-magica hda: ATAPI CD-ROM drive, 0kB Cache
Feb 21 22:37:02 isla-magica Uniform CD-ROM driver Revision: 3.20
Feb 21 22:37:02 isla-magica hda: status error: status=0x59 { DriveReady
SeekComplete DataRequest Error }
Feb 21 22:37:02 isla-magica hda: status error: error=0x00 { }
Feb 21 22:37:02 isla-magica ide: failed opcode was: unknown
Feb 21 22:37:02 isla-magica hda: drive not ready for command
Feb 21 22:37:02 isla-magica hda: status error: status=0x59 { DriveReady
SeekComplete DataRequest Error }
Feb 21 22:37:02 isla-magica hda: status error: error=0x00 { }
Feb 21 22:37:02 isla-magica ide: failed opcode was: unknown
Feb 21 22:37:02 isla-magica hda: drive not ready for command
Feb 21 22:37:02 isla-magica hda: status error: status=0x59 { DriveReady
SeekComplete DataRequest Error }
Feb 21 22:37:02 isla-magica hda: status error: error=0x00 { }
Feb 21 22:37:02 isla-magica ide: failed opcode was: unknown
Feb 21 22:37:02 isla-magica hda: drive not ready for command
Feb 21 22:37:02 isla-magica hda: status error: status=0x59 { DriveReady
SeekComplete DataRequest Error }
Feb 21 22:37:02 isla-magica hda: status error: error=0x00 { }
Feb 21 22:37:02 isla-magica ide: failed opcode was: unknown
Feb 21 22:37:02 isla-magica hda: drive not ready for command
Feb 21 22:37:02 isla-magica hda: status error: status=0x59 { DriveReady
SeekComplete DataRequest Error }
Feb 21 22:37:02 isla-magica hda: status error: error=0x00 { }
Feb 21 22:37:02 isla-magica ide: failed opcode was: unknown
Feb 21 22:37:02 isla-magica hda: drive not ready for command
Feb 21 22:37:02 isla-magica hda: status error: status=0x59 { DriveReady
SeekComplete DataRequest Error }
Feb 21 22:37:02 isla-magica hda: status error: error=0x00 { }
Feb 21 22:37:02 isla-magica ide: failed opcode was: unknown
Feb 21 22:37:02 isla-magica hda: drive not ready for command
Feb 21 22:37:02 isla-magica hda: status error: status=0x59 { DriveReady
SeekComplete DataRequest Error }
Feb 21 22:37:02 isla-magica hda: status error: error=0x00 { }
Feb 21 22:37:02 isla-magica ide: failed opcode was: unknown
Feb 21 22:37:02 isla-magica hda: drive not ready for command
Feb 21 22:37:02 isla-magica Driver 'sd' needs updating - please use
bus_type methods
Feb 21 22:37:02 isla-magica Driver 'sr' needs updating - please use
bus_type methods
Feb 21 22:37:02 isla-magica sata_sil24 0000:02:00.0: version 1.1
...snip...
</dmesg>
tia
daniel
next reply other threads:[~2008-02-22 19:57 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-22 19:57 Daniel Schroeder [this message]
2008-02-22 19:58 ` [MCP-55] IDE problem after bios update Alan Cox
2008-03-10 20:08 ` Daniel Schroeder
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47BF2942.90901@dschroeder.info \
--to=sec@dschroeder.info \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.