Re: SPI Framework chip select

[Ned Forrester <nforrester-/d+BM93fTQY@public.gmane.org>]

David Brownell wrote:
> On Saturday 01 March 2008, Ned Forrester wrote:
>> You can assign spi_device.chip_select=0 for all chips, and as
>> long as you supply a unique
>> spi_device->controller_data->pxa2xx_spi_chip.cs_control for each chip,
>> chip select will work as intended.
> 
> The SPI core would reject such an atrocity.  :)

Well, if you are sure, I suppose it must be somewhere.  I could only
find a check for chip->chip_select >= master->num_chipselect in
spi_new_device(), but not any comparison between chp_select values of
different chips.  Probably I don't know where to find all the files of
the SPI core.

-- 
Ned Forrester                                       nforrester-/d+BM93fTQY@public.gmane.org
Oceanographic Systems Lab                                  508-289-2226
Applied Ocean Physics and Engineering Dept.
Woods Hole Oceanographic Institution          Woods Hole, MA 02543, USA
http://www.whoi.edu/sbl/liteSite.do?litesiteid=7212
http://www.whoi.edu/hpb/Site.do?id=1532
http://www.whoi.edu/page.do?pid=10079


-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/