From: Daniel Hellstrom <daniel@gaisler.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] [PATCH 8/8] SPARC: Added LEON2 and LEON3 boards and simulators
Date: Thu, 13 Mar 2008 10:40:17 +0100 [thread overview]
Message-ID: <47D8F681.4010306@gaisler.com> (raw)
This patch adds support for three LEON3 boards:
* GR-XC3S-1500 (Low cost Xilinx Spartan FPGA board)
* GR-CPCI-AX2000 (AX system with switchable AX FPGA)
* ALTERA NIOS Development board, Stratix II edition
The simulators GRSIM and TSIM for LEON2 and LEON3 has
been added as a board. A separate board is needed due to
that the FLASH CFI interface has not been implemented
in the simulators. Configuring the GR-XC3S-1500 board
without FLASH support should run in the simulator.
Note that by board support I mean support for the
pre synthezied template design for the board in
question. Supporting any configuration is not possible
but almost, due to the Plug & Play system...
The FPGA can be programmed with the template design by:
$ cd grlib/designs/BOARD
$ make ise-prog-prom-ref
Best Regards,
Daniel Hellstrom
MAKEALL | 2 +-
Makefile | 21 ++
board/gaisler/gr_cpci_ax2000/Makefile | 52 ++++
board/gaisler/gr_cpci_ax2000/config.mk | 37 +++
board/gaisler/gr_cpci_ax2000/gr_cpci_ax2000.c | 54 ++++
board/gaisler/gr_cpci_ax2000/u-boot.lds | 160 ++++++++++
board/gaisler/gr_ep2s60/Makefile | 52 ++++
board/gaisler/gr_ep2s60/config.mk | 35 +++
board/gaisler/gr_ep2s60/gr_ep2s60.c | 54 ++++
board/gaisler/gr_ep2s60/u-boot.lds | 160 ++++++++++
board/gaisler/gr_xc3s_1500/Makefile | 52 ++++
board/gaisler/gr_xc3s_1500/config.mk | 34 ++
board/gaisler/gr_xc3s_1500/gr_xc3s_1500.c | 54 ++++
board/gaisler/gr_xc3s_1500/u-boot.lds | 162 ++++++++++
board/gaisler/grsim/Makefile | 50 +++
board/gaisler/grsim/config.mk | 34 ++
board/gaisler/grsim/grsim.c | 43 +++
board/gaisler/grsim/u-boot.lds | 161 ++++++++++
board/gaisler/grsim_leon2/Makefile | 50 +++
board/gaisler/grsim_leon2/config.mk | 34 ++
board/gaisler/grsim_leon2/grsim_leon2.c | 44 +++
board/gaisler/grsim_leon2/u-boot.lds | 159 ++++++++++
include/configs/gr_cpci_ax2000.h | 398
+++++++++++++++++++++++++
include/configs/gr_ep2s60.h | 348 +++++++++++++++++++++
include/configs/grsim.h | 388
++++++++++++++++++++++++
include/configs/grsim_leon2.h | 378
+++++++++++++++++++++++
include/configs/grxc3s1500.h | 334 +++++++++++++++++++++
27 files changed, 3349 insertions(+), 1 deletions(-)
The patch is larger than 40Kb, you can find it at
ftp://ftp.gaisler.com/gaisler.com/u-boot/patches/8_sparc_boards.patch
next reply other threads:[~2008-03-13 9:40 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-13 9:40 Daniel Hellstrom [this message]
2008-03-13 12:24 ` [U-Boot-Users] [PATCH 8/8] SPARC: Added LEON2 and LEON3 boards and simulators Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47D8F681.4010306@gaisler.com \
--to=daniel@gaisler.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.