Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3

[Tejun Heo <htejun@gmail.com>]

Volker Armin Hemmann wrote:
> 
> [   37.123980] ahci 0000:00:0a.0: version 3.0
> [   37.124155] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
> [   37.124199] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 
> (level, low) -> IRQ 23
> [   37.124533] ahci 0000:00:0a.0: controller can't do PMP, turning off CAP_PMP
> [   38.124731] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf 
> impl IDE mode
> [   38.124780] ahci 0000:00:0a.0: flags: 64bit sntf led clo pio
> [   38.124819] PCI: Setting latency timer of device 0000:00:0a.0 to 64
> [   38.125020] scsi0 : ahci
> [   38.125116] scsi1 : ahci
> [   38.125182] scsi2 : ahci
> [   38.125248] scsi3 : ahci
> [   38.125337] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 
> irq 315
> [   38.125384] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 
> irq 315
> [   38.125432] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 
> irq 315
> [   38.125479] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 
> irq 315
> [   38.597035] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [   38.597732] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
> [   38.597775] ata1.00: 312581808 sectors, multi 16: LBA48
> [   38.598405] ata1.00: configured for UDMA/133
> [   39.069342] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [   39.084225] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
> [   39.084264] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
> [   39.086268] ata2.00: configured for UDMA/133

So, just to confirm.  With the updated patch, you don't see any problem,
right?

-- 
tejun