All of lore.kernel.org
 help / color / mirror / Atom feed
From: Matthew Ranostay <mranostay@embeddedalley.com>
To: Andre Tomt <andre@tomt.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>, linux-kernel@vger.kernel.org
Subject: Re: 2.6.25-git regression with snd-hda-intel on Dell XPS M1330, no analog sound
Date: Fri, 21 Mar 2008 16:30:35 -0400	[thread overview]
Message-ID: <47E41AEB.2060901@embeddedalley.com> (raw)
In-Reply-To: <47E40684.2030608@tomt.net>

Andre Tomt wrote:
> [Rafael & Matthew: this is a resend - original was sent to wrong
> linux-kernel address. Also updated, so just ignore the earlier emails.]
> 
> With 2.6.25-git I lost sound on my Dell XPS M1330 laptop. There seems to
> be two issues at hand here: 1. Analog output is listed, but emits no
> sound (just silence), and 2. Digital out device is missing.
> 
Ok this is puzzling can you paste the results of 'cat /proc/asound/card0/codec0#*'?

Thanks,

Matthew Ranostay

> Issue #1 is bisected in this thread. #2 is still work in progress, and
> will be posted as a separate thread.
> 
> git bisect nailed down the missing audio issue to this commit:
>> 2f32d909f3a85a96074801f6cf20f93324f87646 is first bad commit
>> commit 2f32d909f3a85a96074801f6cf20f93324f87646
>> Author: Matthew Ranostay <mranostay@embeddedalley.com>
>> Date:   Thu Jan 10 13:06:26 2008 +0100
>>
>>     [ALSA] hda: STAC9228 VT fixes
>>
>>     Moved 2 systems PCI_QUIRK values to STAC_DELL_BIOS. Also the second
>>     front HP jack is incorrect defined in the BIOS VT's for some laptops,
>>     this patch corrects this.
>>
>>     Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
>>     Signed-off-by: Takashi Iwai <tiwai@suse.de>
>>     Signed-off-by: Jaroslav Kysela <perex@perex.cz>
>>
>> :040000 040000 98d7878c8addc0b1595d4b42524cf9cb6cf8759a
>> e32416d5e02694320e8aac369b260d86b2eb2508 M   sound
> 
> lspci:
>> 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD
>> Audio Controller [8086:284b] (rev 02)
>>         Subsystem: Dell Unknown device [1028:0209]
>>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR+ FastB2B- DisINTx+
>>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>         Latency: 0, Cache Line Size: 64 bytes
>>         Interrupt: pin A routed to IRQ 217
>>         Region 0: Memory at febfc000 (64-bit, non-prefetchable)
>> [size=16K]
>>         Capabilities: [50] Power Management version 2
>>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
>> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>         Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
>> Queue=0/0 Enable+
>>                 Address: 00000000fee0300c  Data: 414a
>>         Capabilities: [70] Express (v1) Root Complex Integrated
>> Endpoint, MSI 00
>>                 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
>> unlimited, L1 unlimited
>>                         ExtTag- RBE- FLReset-
>>                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
>> Unsupported-
>>                         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>>                         MaxPayload 128 bytes, MaxReadReq 128 bytes
>>                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
>> AuxPwr+ TransPend-
>>                 LnkCap: Port #0, Speed unknown, Width x0, ASPM
>> unknown, Latency L0 <64ns, L1 <1us
>>                         ClockPM- Suprise- LLActRep- BwNot-
>>                 LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
>>                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>                 LnkSta: Speed unknown, Width x0, TrErr- Train-
>> SlotClk- DLActive- BWMgmt- ABWMgmt-
>>         Capabilities: [100] Virtual Channel <?>
>>         Capabilities: [130] Root Complex Link <?>
>>         Kernel driver in use: HDA Intel
>>         Kernel modules: snd-hda-intel
>> 00: 86 80 4b 28 06 05 10 00 02 00 03 04 10 00 00 00
>> 10: 04 c0 bf fe 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 09 02
>> 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00
>> 40: 01 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00
>> 50: 01 60 42 c8 00 00 00 00 00 00 00 00 00 00 00 00
>> 60: 05 70 81 00 0c 30 e0 fe 00 00 00 00 4a 41 00 00
>> 70: 10 00 91 00 c0 0f 00 00 00 08 10 00 00 00 00 00
>> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> c0: 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> f0: 00 00 00 00 00 00 00 00 86 0f 05 00 00 00 00 00
> 
> 
> 


  reply	other threads:[~2008-03-21 20:37 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-03-21 19:03 2.6.25-git regression with snd-hda-intel on Dell XPS M1330, no analog sound Andre Tomt
2008-03-21 20:30 ` Matthew Ranostay [this message]
2008-03-21 21:31   ` Andre Tomt
2008-03-22 16:44 ` Takashi Iwai
2008-03-23 22:49   ` Andre Tomt
  -- strict thread matches above, loose matches on Subject: below --
2008-04-03 22:49 2.6.25-rc8-git2: Reported regressions from 2.6.24 Rafael J. Wysocki
2008-04-03 23:22 ` 2.6.25-git regression with snd-hda-intel on Dell XPS M1330, no analog sound Rafael J. Wysocki
2008-04-05 19:49   ` Bill Davidsen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=47E41AEB.2060901@embeddedalley.com \
    --to=mranostay@embeddedalley.com \
    --cc=andre@tomt.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rjw@sisk.pl \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.