All of lore.kernel.org
 help / color / mirror / Atom feed
From: Manish Ahuja <ahuja@austin.ibm.com>
To: linuxppc-dev@ozlabs.org, paulus@samba.org, michael@ellerman.id.au
Cc: mahuja@us.ibm.com, linasvepstas@gmail.com
Subject: [PATCH 5/8] pseries: phyp dump: debugging print routines.
Date: Fri, 21 Mar 2008 18:44:05 -0500	[thread overview]
Message-ID: <47E44845.4060505@austin.ibm.com> (raw)
In-Reply-To: <47E439C3.6050904@austin.ibm.com>



Provide some basic debugging support.

Signed-off-by: Manish Ahuja <mahuja@us.ibm.com>
Signed-off-by: Linas Vepstas <linasvepstas@gmail.com>
---

 arch/powerpc/platforms/pseries/phyp_dump.c |   61 ++++++++++++++++++++++++++++-
 1 file changed, 59 insertions(+), 2 deletions(-)

Index: 2.6.25-rc1/arch/powerpc/platforms/pseries/phyp_dump.c
===================================================================
--- 2.6.25-rc1.orig/arch/powerpc/platforms/pseries/phyp_dump.c	2008-03-21 22:52:53.000000000 -0500
+++ 2.6.25-rc1/arch/powerpc/platforms/pseries/phyp_dump.c	2008-03-21 22:54:44.000000000 -0500
@@ -123,6 +123,61 @@ static unsigned long init_dump_header(st
 	return addr_offset;
 }
 
+static void print_dump_header(const struct phyp_dump_header *ph)
+{
+#ifdef DEBUG
+	printk(KERN_INFO "dump header:\n");
+	/* setup some ph->sections required */
+	printk(KERN_INFO "version = %d\n", ph->version);
+	printk(KERN_INFO "Sections = %d\n", ph->num_of_sections);
+	printk(KERN_INFO "Status = 0x%x\n", ph->status);
+
+	/* No ph->disk, so all should be set to 0 */
+	printk(KERN_INFO "Offset to first section 0x%x\n",
+		ph->first_offset_section);
+	printk(KERN_INFO "dump disk sections should be zero\n");
+	printk(KERN_INFO "dump disk section = %d\n", ph->dump_disk_section);
+	printk(KERN_INFO "block num = %ld\n", ph->block_num_dd);
+	printk(KERN_INFO "number of blocks = %ld\n", ph->num_of_blocks_dd);
+	printk(KERN_INFO "dump disk offset = %d\n", ph->offset_dd);
+	printk(KERN_INFO "Max auto time= %d\n", ph->maxtime_to_auto);
+
+	/*set cpu state and hpte states as well scratch pad area */
+	printk(KERN_INFO " CPU AREA \n");
+	printk(KERN_INFO "cpu dump_flags =%d\n", ph->cpu_data.dump_flags);
+	printk(KERN_INFO "cpu source_type =%d\n", ph->cpu_data.source_type);
+	printk(KERN_INFO "cpu error_flags =%d\n", ph->cpu_data.error_flags);
+	printk(KERN_INFO "cpu source_address =%lx\n",
+		ph->cpu_data.source_address);
+	printk(KERN_INFO "cpu source_length =%lx\n",
+		ph->cpu_data.source_length);
+	printk(KERN_INFO "cpu length_copied =%lx\n",
+		ph->cpu_data.length_copied);
+
+	printk(KERN_INFO " HPTE AREA \n");
+	printk(KERN_INFO "HPTE dump_flags =%d\n", ph->hpte_data.dump_flags);
+	printk(KERN_INFO "HPTE source_type =%d\n", ph->hpte_data.source_type);
+	printk(KERN_INFO "HPTE error_flags =%d\n", ph->hpte_data.error_flags);
+	printk(KERN_INFO "HPTE source_address =%lx\n",
+		ph->hpte_data.source_address);
+	printk(KERN_INFO "HPTE source_length =%lx\n",
+		ph->hpte_data.source_length);
+	printk(KERN_INFO "HPTE length_copied =%lx\n",
+		ph->hpte_data.length_copied);
+
+	printk(KERN_INFO " SRSD AREA \n");
+	printk(KERN_INFO "SRSD dump_flags =%d\n", ph->kernel_data.dump_flags);
+	printk(KERN_INFO "SRSD source_type =%d\n", ph->kernel_data.source_type);
+	printk(KERN_INFO "SRSD error_flags =%d\n", ph->kernel_data.error_flags);
+	printk(KERN_INFO "SRSD source_address =%lx\n",
+		ph->kernel_data.source_address);
+	printk(KERN_INFO "SRSD source_length =%lx\n",
+		ph->kernel_data.source_length);
+	printk(KERN_INFO "SRSD length_copied =%lx\n",
+		ph->kernel_data.length_copied);
+#endif
+}
+
 static void register_dump_area(struct phyp_dump_header *ph, unsigned long addr)
 {
 	int rc;
@@ -135,9 +190,11 @@ static void register_dump_area(struct ph
 				1, ph, sizeof(struct phyp_dump_header));
 	} while (rtas_busy_delay(rc));
 
-	if (rc)
+	if (rc) {
 		printk(KERN_ERR "phyp-dump: unexpected error (%d) on "
 						"register\n", rc);
+		print_dump_header(ph);
+	}
 }
 
 /* ------------------------------------------------- */
@@ -246,8 +303,8 @@ static int __init phyp_dump_setup(void)
 		of_node_put(rtas);
 	}
 
+	print_dump_header(dump_header);
 	dump_area_length = init_dump_header(&phdr);
-
 	/* align down */
 	dump_area_start = phyp_dump_info->init_reserve_start & PAGE_MASK;
 

  parent reply	other threads:[~2008-03-21 23:44 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-03-21 22:42 [PATCH 0/8] pseries: phyp dump: hypervisor-assisted dump Manish Ahuja
2008-03-21 23:33 ` [PATCH 1/8] pseries: phyp dump: Documentation Manish Ahuja
2008-03-21 23:37 ` [PATCH 2/8] pseries: phyp dump: reserve-release Manish Ahuja
2008-03-21 23:39 ` [PATCH 3/8] pseries: phyp dump: use sysfs to release reserved mem Manish Ahuja
2008-03-21 23:43 ` [PATCH 4/8] pseries: phyp dump: register dump area Manish Ahuja
2008-03-21 23:44 ` Manish Ahuja [this message]
2008-03-21 23:45 ` [PATCH 6/8] pseries: phyp dump: Invalidate and print dump areas Manish Ahuja
2008-03-21 23:47 ` [PATCH 7/8] pseries: phyp dump: Tracking memory range freed Manish Ahuja
2008-03-21 23:50 ` [PATCH 8/8] pseries: phyp dump: config file Manish Ahuja
  -- strict thread matches above, loose matches on Subject: below --
2008-02-18  4:53 [PATCH 0/8] pseries: phyp dump: hypervisor-assisted dump Manish Ahuja
2008-02-18  5:41 ` [PATCH 5/8] pseries: phyp dump: debugging print routines Manish Ahuja
2008-02-22  0:53 ` [PATCH 0/8] pseries: phyp dump: hypervisor-assisted dump Michael Ellerman
2008-02-28 23:57   ` Manish Ahuja
2008-02-29  0:31     ` [PATCH 5/8] pseries: phyp dump: debugging print routines Manish Ahuja
2008-01-22 19:12 [PATCH 0/8] pseries: phyp dump: hypervisor-assisted dump Manish Ahuja
2008-01-22 21:02 ` [PATCH 5/8] pseries: phyp dump: debugging print routines Manish Ahuja
2008-01-07 23:45 [PATCH 0/8] pseries: phyp dump: hypervisor-assisted dump Manish Ahuja
2008-02-12  6:31 ` Manish Ahuja
2008-02-12  7:16   ` [PATCH 5/8] pseries: phyp dump: debugging print routines Manish Ahuja

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=47E44845.4060505@austin.ibm.com \
    --to=ahuja@austin.ibm.com \
    --cc=linasvepstas@gmail.com \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=mahuja@us.ibm.com \
    --cc=michael@ellerman.id.au \
    --cc=paulus@samba.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.