All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ke Wei <kewei@marvell.com>
To: linux-scsi@vger.kernel.org
Cc: james.bottomley@hansenpartnership.com, jeff@garzik.org
Subject: [PATCH 4/9][RESEND] mvsas: check hd whether unplugged
Date: Thu, 27 Mar 2008 14:54:50 +0800	[thread overview]
Message-ID: <47EB44BA.2060505@marvell.com> (raw)

if unplugged, driver's queuecommand function will return SAS_PHY_DOWN.
task->lldd_task is used for saving its slot info.

Signed-off-by: Ke Wei <kewei@marvell.com>
---
 drivers/scsi/mvsas.c |   76 +++++++++++++++++++++++++++++--------------------
 1 files changed, 45 insertions(+), 31 deletions(-)

diff --git a/drivers/scsi/mvsas.c b/drivers/scsi/mvsas.c
index f302970..ebfe164 100644
--- a/drivers/scsi/mvsas.c
+++ b/drivers/scsi/mvsas.c
@@ -1784,15 +1784,19 @@ static u8 mvs_assign_reg_set(struct mvs_info *mvi, struct mvs_port *port)
 	return MVS_ID_NOT_MAPPED;
 }
 
-static u32 mvs_get_ncq_tag(struct sas_task *task)
+static u32 mvs_get_ncq_tag(struct sas_task *task, u32 *tag)
 {
-	u32 tag = 0;
 	struct ata_queued_cmd *qc = task->uldd_task;
 
-	if (qc)
-		tag = qc->tag;
+	if (qc) {
+		if (qc->tf.command == ATA_CMD_FPDMA_WRITE ||
+			qc->tf.command == ATA_CMD_FPDMA_READ) {
+			*tag = qc->tag;
+			return 1;
+		}
+	}
 
-	return tag;
+	return 0;
 }
 
 static int mvs_task_prep_ata(struct mvs_info *mvi,
@@ -1836,11 +1840,9 @@ static int mvs_task_prep_ata(struct mvs_info *mvi,
 	hdr->flags = cpu_to_le32(flags);
 
 	/* FIXME: the low order order 5 bits for the TAG if enable NCQ */
-	if (task->ata_task.use_ncq) {
-		hdr->tags = cpu_to_le32(mvs_get_ncq_tag(task));
-		/*Fill in task file */
-		task->ata_task.fis.sector_count = hdr->tags << 3;
-	} else
+	if (task->ata_task.use_ncq && mvs_get_ncq_tag(task, &hdr->tags))
+		task->ata_task.fis.sector_count |= hdr->tags << 3;
+	else
 		hdr->tags = cpu_to_le32(tag);
 	hdr->data_len = cpu_to_le32(task->total_xfer_len);
 
@@ -1933,13 +1935,16 @@ static int mvs_task_prep_ssp(struct mvs_info *mvi,
 	u32 flags;
 	u32 resp_len, req_len, i, tag = tei->tag;
 	const u32 max_resp_len = SB_RFB_MAX;
+	u8 phy_mask;
 
 	slot = &mvi->slot_info[tag];
 
+	phy_mask = (port->wide_port_phymap) ? port->wide_port_phymap :
+		task->dev->port->phy_mask;
 	slot->tx = mvi->tx_prod;
 	mvi->tx[mvi->tx_prod] = cpu_to_le32(TXQ_MODE_I | tag |
 				(TXQ_CMD_SSP << TXQ_CMD_SHIFT) |
-				(port->wide_port_phymap << TXQ_PHY_SHIFT));
+				(phy_mask << TXQ_PHY_SHIFT));
 
 	flags = MCH_RETRY;
 	if (task->ssp_task.enable_first_burst) {
@@ -2040,22 +2045,32 @@ static int mvs_task_exec(struct sas_task *task, const int num, gfp_t gfp_flags)
 	void __iomem *regs = mvi->regs;
 	struct mvs_task_exec_info tei;
 	struct sas_task *t = task;
+	struct mvs_slot_info *slot;
 	u32 tag = 0xdeadbeef, rc, n_elem = 0;
 	unsigned long flags;
 	u32 n = num, pass = 0;
 
 	spin_lock_irqsave(&mvi->lock, flags);
-
 	do {
+		dev = t->dev;
 		tei.port = &mvi->port[dev->port->id];
 
 		if (!tei.port->port_attached) {
-			struct task_status_struct *ts = &t->task_status;
-			ts->stat = SAS_PHY_DOWN;
-			t->task_done(t);
-			rc = 0;
-			goto exec_exit;
+			if (sas_protocol_ata(t->task_proto)) {
+				rc = SAS_PHY_DOWN;
+				goto out_done;
+			} else {
+				struct task_status_struct *ts = &t->task_status;
+				ts->resp = SAS_TASK_UNDELIVERED;
+				ts->stat = SAS_PHY_DOWN;
+				t->task_done(t);
+				if (n > 1)
+					t = list_entry(t->list.next,
+							struct sas_task, list);
+				continue;
+			}
 		}
+
 		if (!sas_protocol_ata(t->task_proto)) {
 			if (t->num_scatter) {
 				n_elem = pci_map_sg(mvi->pdev, t->scatter,
@@ -2074,9 +2089,10 @@ static int mvs_task_exec(struct sas_task *task, const int num, gfp_t gfp_flags)
 		if (rc)
 			goto err_out;
 
-		mvi->slot_info[tag].task = t;
-		mvi->slot_info[tag].n_elem = n_elem;
-		memset(mvi->slot_info[tag].buf, 0, MVS_SLOT_BUF_SZ);
+		slot = &mvi->slot_info[tag];
+		t->lldd_task = NULL;
+		slot->n_elem = n_elem;
+		memset(slot->buf, 0, MVS_SLOT_BUF_SZ);
 		tei.task = t;
 		tei.hdr = &mvi->slot[tag];
 		tei.tag = tag;
@@ -2105,28 +2121,26 @@ static int mvs_task_exec(struct sas_task *task, const int num, gfp_t gfp_flags)
 		if (rc)
 			goto err_out_tag;
 
+		slot->task = t;
+		slot->port = tei.port;
+		t->lldd_task = (void *) slot;
+		list_add_tail(&slot->list, &slot->port->list);
 		/* TODO: select normal or high priority */
 
 		spin_lock(&t->task_state_lock);
 		t->task_state_flags |= SAS_TASK_AT_INITIATOR;
 		spin_unlock(&t->task_state_lock);
 
-		if (n == 1) {
-			spin_unlock_irqrestore(&mvi->lock, flags);
-			mw32(TX_PROD_IDX, mvi->tx_prod);
-		}
 		mvs_hba_memory_dump(mvi, tag, t->task_proto);
 
 		++pass;
 		mvi->tx_prod = (mvi->tx_prod + 1) & (MVS_CHIP_SLOT_SZ - 1);
-
-		if (n == 1)
-			break;
-
-		t = list_entry(t->list.next, struct sas_task, list);
+		if (n > 1)
+			t = list_entry(t->list.next, struct sas_task, list);
 	} while (--n);
 
-	return 0;
+	rc = 0;
+	goto out_done;
 
 err_out_tag:
 	mvs_tag_free(mvi, tag);
@@ -2136,7 +2150,7 @@ err_out:
 		if (n_elem)
 			pci_unmap_sg(mvi->pdev, t->scatter, n_elem,
 				     t->data_dir);
-exec_exit:
+out_done:
 	if (pass)
 		mw32(TX_PROD_IDX, (mvi->tx_prod - 1) & (MVS_CHIP_SLOT_SZ - 1));
 	spin_unlock_irqrestore(&mvi->lock, flags);
-- 
1.5.4




                 reply	other threads:[~2008-03-27  6:54 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=47EB44BA.2060505@marvell.com \
    --to=kewei@marvell.com \
    --cc=james.bottomley@hansenpartnership.com \
    --cc=jeff@garzik.org \
    --cc=linux-scsi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.