PM: Adding info for pnp:00:01 PM: Adding info for pnp:00:02 PM: Adding info for pnp:00:03 PM: Adding info for pnp:00:04 PM: Adding info for pnp:00:05 PM: Adding info for pnp:00:06 PM: Adding info for pnp:00:07 PM: Adding info for pnp:00:08 PM: Adding info for pnp:00:09 PM: Adding info for pnp:00:0a PM: Adding info for pnp:00:0b pnp: PnP ACPI: found 12 devices xen_mem: Initialising balloon driver. SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pciback 0000:07:01.0: seizing device PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:03.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:05.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:05:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:04:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:04:00.3 IO window: 2000-2fff MEM window: d8000000-d80fffff PREFETCH window: d8400000-d84fffff PCI: Bridge: 0000:00:07.0 IO window: 2000-2fff MEM window: d8000000-d81fffff PREFETCH window: d8400000-d84fffff PCI: Bridge: 0000:00:09.0 IO window: 3000-3fff MEM window: d8200000-d82fffff PREFETCH window: d8500000-d85fffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: 4000-4fff MEM window: d8300000-d83fffff PREFETCH window: d0000000-d7ffffff ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 48 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 50 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:03.0 to 64 ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 52 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:05.0 to 64 ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 54 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:07.0 to 64 ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 54 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:04:00.0 to 64 ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 54 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:05:00.0 to 64 PCI: Setting latency timer of device 0000:04:00.3 to 64 ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 56 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:09.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered PM: Adding info for platform:pcspkr Simple Boot Flag at 0x41 set to 0x1 IA-32 Microcode Update Driver: v1.14a-xen audit: initializing netlink socket (disabled) audit(1206629745.440:1): initialized highmem bounce pool size: 64 pages Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] PM: Adding info for pci_express:0000:00:01.0:pcie00 Allocate Port Service[0000:00:01.0:pcie01] PM: Adding info for pci_express:0000:00:01.0:pcie01 PCI: Setting latency timer of device 0000:00:03.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.0:pcie00] PM: Adding info for pci_express:0000:00:03.0:pcie00 Allocate Port Service[0000:00:03.0:pcie01] PM: Adding info for pci_express:0000:00:03.0:pcie01 PCI: Setting latency timer of device 0000:00:05.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:05.0:pcie00] PM: Adding info for pci_express:0000:00:05.0:pcie00 Allocate Port Service[0000:00:05.0:pcie01] PM: Adding info for pci_express:0000:00:05.0:pcie01 PCI: Setting latency timer of device 0000:00:07.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:07.0:pcie00] PM: Adding info for pci_express:0000:00:07.0:pcie00 Allocate Port Service[0000:00:07.0:pcie01] PM: Adding info for pci_express:0000:00:07.0:pcie01 PCI: Setting latency timer of device 0000:00:09.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:09.0:pcie00] PM: Adding info for pci_express:0000:00:09.0:pcie00 Allocate Port Service[0000:00:09.0:pcie01] PM: Adding info for pci_express:0000:00:09.0:pcie01 PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] PM: Adding info for pci_express:0000:00:1c.0:pcie00 Allocate Port Service[0000:00:1c.0:pcie02] PM: Adding info for pci_express:0000:00:1c.0:pcie02 Allocate Port Service[0000:00:1c.0:pcie03] PM: Adding info for pci_express:0000:00:1c.0:pcie03 PCI: Setting latency timer of device 0000:04:00.0 to 64 Allocate Port Service[0000:04:00.0:pcie10] PM: Adding info for pci_express:0000:04:00.0:pcie10 Allocate Port Service[0000:04:00.0:pcie11] PM: Adding info for pci_express:0000:04:00.0:pcie11 PCI: Setting latency timer of device 0000:05:00.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:05:00.0:pcie20] PM: Adding info for pci_express:0000:05:00.0:pcie20 Allocate Port Service[0000:05:00.0:pcie21] PM: Adding info for pci_express:0000:05:00.0:pcie21 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Linux agpgart interface v0.101 (c) Dave Jones RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 7.1.9-k4-NAPI Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt 0000:07:02.0[A] -> GSI 28 (level, low) -> IRQ 22 e1000: 0000:07:02.0: e1000_probe: (PCI:66MHz:32-bit) 00:0e:0c:d9:48:65 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection Intel(R) PRO/10GbE Network Driver - version 1.0.109-k2 Copyright (c) 1999-2006 Intel Corporation. e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky Xen virtual console successfully installed as xvc0 Event-channel device installed. ACPI: PCI Interrupt 0000:07:01.0[A] -> GSI 24 (level, low) -> IRQ 23 ACPI: PCI interrupt for device 0000:07:01.0 disabled Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx libata version 2.00 loaded. ata_piix 0000:00:1f.2: version 2.00 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 24 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x1880 irq 14 scsi0 : ata_piix PM: Adding info for No Bus:host0 ata1.00: ATA-7, max UDMA/133, 312500000 sectors: LBA48 ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/133 PM: Adding info for No Bus:target0:0:0 Vendor: ATA Model: Maxtor 6Y160M0 Rev: YAR5 Type: Direct-Access ANSI SCSI revision: 05 PM: Adding info for scsi:0:0:0:0 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15 scsi1 : ata_piix PM: Adding info for No Bus:host1 ata2.01: ATAPI, max UDMA/66 ata2.01: configured for UDMA/33 PM: Adding info for No Bus:target1:0:1 ATA: abnormal status 0x58 on port 0x177 ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.01: (BMDMA stat 0x46) ata2.01: tag 0 cmd 0xa0 Emask 0x20 stat 0x40 err 0x0 (host bus error) ATA: abnormal status 0x58 on port 0x177 ATA: abnormal status 0x58 on port 0x177 ATA: abnormal status 0x58 on port 0x177 ATA: abnormal status 0x58 on port 0x177 ATA: abnormal status 0x58 on port 0x177 ata2.01: failed to IDENTIFY (I/O error, err_mask=0x1) ata2.01: revalidation failed (errno=-5) ata2: failed to recover some devices, retrying in 5 secs ata2: soft resetting port ata2.01: configured for UDMA/33 ata2: EH complete ATA: abnormal status 0x58 on port 0x177 ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.01: (BMDMA stat 0x46) ata2.01: tag 0 cmd 0xa0 Emask 0x20 stat 0x40 err 0x0 (host bus error) ATA: abnormal status 0x58 on port 0x177 ATA: abnormal status 0x58 on port 0x177 ATA: abnormal status 0x58 on port 0x177 ATA: abnormal status 0x58 on port 0x177 ATA: abnormal status 0x58 on port 0x177 ata2.01: failed to IDENTIFY (I/O error, err_mask=0x1) ata2.01: revalidation failed (errno=-5) ata2: failed to recover some devices, retrying in 5 secs ata2: soft resetting port ata2.01: configured for UDMA/33 ata2: EH complete ATA: abnormal status 0x58 on port 0x177 ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.01: (BMDMA stat 0x46) ata2.01: tag 0 cmd 0xa0 Emask 0x20 stat 0x40 err 0x0 (host bus error) ATA: abnormal status 0x58 on port 0x177 ATA: abnormal status 0x58 on port 0x177 ATA: abnormal status 0x58 on port 0x177 ATA: abnormal status 0x58 on port 0x177 ATA: abnormal status 0x58 on port 0x177 ata2.01: failed to IDENTIFY (I/O error, err_mask=0x1) ata2.01: revalidation failed (errno=-5) ata2: failed to recover some devices, retrying in 5 secs ata2: soft resetting port ata2.01: configured for UDMA/33 ata2: EH complete ATA: abnormal status 0x58 on port 0x177 ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.01: (BMDMA stat 0x46) ata2.01: tag 0 cmd 0xa0 Emask 0x20 stat 0x40 err 0x0 (host bus error) ATA: abnormal status 0x58 on port 0x177 ATA: abnormal status 0x58 on port 0x177 ATA: abnormal status 0x58 on port 0x177 ATA: abnormal status 0x58 on port 0x177 ATA: abnormal status 0x58 on port 0x177 ata2.01: failed to IDENTIFY (I/O error, err_mask=0x1) ata2.01: revalidation failed (errno=-5) ata2: failed to recover some devices, retrying in 5 secs ata2: soft resetting port ata2.01: configured for UDMA/33 ata2: EH complete PM: Removing info for No Bus:target1:0:1 SCSI device sda: 312500000 512-byte hdwr sectors (160000 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 312500000 512-byte hdwr sectors (160000 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 < sda5 > sd 0:0:0:0: Attached scsi disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 SCSI Media Changer driver v0.25 ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 25 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 25, io mem 0xd8604000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 PM: Adding info for usb:usb1 PM: Adding info for No Bus:usbdev1.1_ep00 usb usb1: configuration #1 chosen from 1 choice PM: Adding info for usb:1-0:1.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected PM: Adding info for No Bus:usbdev1.1_ep81 USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 26 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 26, io base 0x00001800 PM: Adding info for usb:usb2 PM: Adding info for No Bus:usbdev2.1_ep00 usb usb2: configuration #1 chosen from 1 choice PM: Adding info for usb:2-0:1.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected PM: Adding info for No Bus:usbdev2.1_ep81 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 27 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 27, io base 0x00001820 PM: Adding info for usb:usb3 PM: Adding info for No Bus:usbdev3.1_ep00 usb usb3: configuration #1 chosen from 1 choice PM: Adding info for usb:3-0:1.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected PM: Adding info for No Bus:usbdev3.1_ep81 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 28 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 28, io base 0x00001840 PM: Adding info for usb:usb4 PM: Adding info for No Bus:usbdev4.1_ep00 usb usb4: configuration #1 chosen from 1 choice PM: Adding info for usb:4-0:1.0 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected PM: Adding info for No Bus:usbdev4.1_ep81 usb 2-2: new low speed USB device using uhci_hcd and address 2 PM: Adding info for usb:2-2 PM: Adding info for No Bus:usbdev2.2_ep00 usb 2-2: configuration #1 chosen from 1 choice PM: Adding info for usb:2-2:1.0 PM: Adding info for No Bus:usbdev2.2_ep81 PM: Adding info for usb:2-2:1.1 PM: Adding info for No Bus:usbdev2.2_ep82 input: Avocent Dell 03R874 as /class/input/input0 input: USB HID v1.10 Keyboard [Avocent Dell 03R874] on usb-0000:00:1d.0-2 input: Avocent Dell 03R874 as /class/input/input1 input: USB HID v1.10 Mouse [Avocent Dell 03R874] on usb-0000:00:1d.0-2 usbcore: registered new driver usbhid /data/work/linux-2.6.18-xen.hg/drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 PM: Adding info for platform:i8042 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 PM: Adding info for serio:serio0 PM: Adding info for serio:serio1 mice: PS/2 mouse device common for all mice Netfilter messages via NETLINK v0.30. IPv4 over IPv4 tunneling driver GRE over IPv4 tunneling driver TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 Bridge firewalling registered Ebtables v2.0 registered 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller Using IPI No-Shortcut mode ACPI: (supports S0 S1 S4 S5) BIOS EDD facility v0.16 2004-Jun-25, 1 devices found kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem). Freeing unused kernel memory: 192k freed Adding 2650684k swap on /dev/sda5. Priority:-1 extents:1 across:2650684k EXT3 FS on sda1, internal journal e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex