[U-Boot-Users] [PATCH 9/13] SPARC: Added LEON3 board GR-XC3S-1500.

[Daniel Hellstrom <daniel@gaisler.com>]

Hello Wolfgang,

This patch adds support for the LEON3 board:
 * GR-XC3S-1500 (Low cost Xilinx Spartan FPGA board)

Note that by board support I mean support for the
pre synthezied template design for the board. Supporting
any configuration is not possible but almost, due to the
Plug & Play system...
The FPGA can be programmed with the template design by:
 $ cd grlib/designs/BOARD
 $ make ise-prog-prom-ref

This patch is also available at 
ftp://ftp.gaisler.com/gaisler.com/u-boot/patches.

Best Regards,
Daniel Hellstrom



 MAKEALL                                   |    2 +-
 Makefile                                  |    4 +
 board/gaisler/gr_xc3s_1500/Makefile       |   52 +++++
 board/gaisler/gr_xc3s_1500/config.mk      |   34 +++
 board/gaisler/gr_xc3s_1500/gr_xc3s_1500.c |   39 ++++
 board/gaisler/gr_xc3s_1500/u-boot.lds     |  162 +++++++++++++++
 include/configs/gr_xc3s_1500.h            |  321 
+++++++++++++++++++++++++++++
 7 files changed, 613 insertions(+), 1 deletions(-)


diff --git a/MAKEALL b/MAKEALL
index d63a228..dc11ed8 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -714,7 +714,7 @@ LIST_sh="        \
 ## SPARC Systems
 #########################################################################
 
-LIST_sparc=""
+LIST_sparc="gr_xc3s_1500"
 
 #-----------------------------------------------------------------------
 
diff --git a/Makefile b/Makefile
index 8d4c10d..99811aa 100644
--- a/Makefile
+++ b/Makefile
@@ -2862,6 +2862,10 @@ ms7722se_config :    unconfig
 ## LEON3
 #########################################################################
 
+# Gaisler GR-XC3S-1500 board
+gr_xc3s_1500_config : unconfig
+    @$(MKCONFIG) $(@:_config=) sparc leon3 gr_xc3s_1500 gaisler
+
 #########################################################################
 ## LEON2
 #########################################################################
diff --git a/board/gaisler/gr_xc3s_1500/Makefile 
b/board/gaisler/gr_xc3s_1500/Makefile
new file mode 100644
index 0000000..d58f50d
--- /dev/null
+++ b/board/gaisler/gr_xc3s_1500/Makefile
@@ -0,0 +1,52 @@
+
+#
+# (C) Copyright 2003-2006
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB    = $(obj)lib$(BOARD).a
+
+COBJS    := $(BOARD).o
+
+#flash.o
+SRCS    := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS    := $(addprefix $(obj),$(COBJS))
+SOBJS    := $(addprefix $(obj),$(SOBJS))
+
+$(LIB):    $(obj).depend $(OBJS)
+    $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+    rm -f $(SOBJS) $(OBJS)
+
+distclean:    clean
+    rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/gaisler/gr_xc3s_1500/config.mk 
b/board/gaisler/gr_xc3s_1500/config.mk
new file mode 100644
index 0000000..35cbc1b
--- /dev/null
+++ b/board/gaisler/gr_xc3s_1500/config.mk
@@ -0,0 +1,34 @@
+#
+# (C) Copyright 2007
+# Daniel Hellstrom, Gaisler Research, daniel at gaisler.com.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# GR-XC3S-1500 board
+#
+
+# U-BOOT IN FLASH
+TEXT_BASE = 0x00000000
+
+# U-BOOT IN RAM
+#TEXT_BASE = 0x40000000
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
diff --git a/board/gaisler/gr_xc3s_1500/gr_xc3s_1500.c 
b/board/gaisler/gr_xc3s_1500/gr_xc3s_1500.c
new file mode 100644
index 0000000..1ee7024
--- /dev/null
+++ b/board/gaisler/gr_xc3s_1500/gr_xc3s_1500.c
@@ -0,0 +1,39 @@
+/*
+ * (C) Copyright 2007
+ * Daniel Hellstrom, daniel at gaisler.com.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#include <asm/leon.h>
+
+long int initdram(int board_type)
+{
+    return 1;
+}
+
+int checkboard(void)
+{
+    puts("Board: GR-XC3S-1500\n");
+    return 0;
+}
+
+int misc_init_r(void)
+{
+    return 0;
+}
diff --git a/board/gaisler/gr_xc3s_1500/u-boot.lds 
b/board/gaisler/gr_xc3s_1500/u-boot.lds
new file mode 100644
index 0000000..3848c68
--- /dev/null
+++ b/board/gaisler/gr_xc3s_1500/u-boot.lds
@@ -0,0 +1,162 @@
+/* Linker script for Gaisler Research AB's GR-XC3S-1500 board
+ * with template design.
+ *
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, daniel at gaisler.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+OUTPUT_FORMAT("elf32-sparc", "elf32-sparc", "elf32-sparc")
+OUTPUT_ARCH(sparc)
+ENTRY(_start)
+SECTIONS
+{
+
+/* Read-only sections, merged into text segment: */
+    . = + SIZEOF_HEADERS;
+    .interp : { *(.interp) }
+    .hash          : { *(.hash)        }
+    .dynsym        : { *(.dynsym)        }
+    .dynstr        : { *(.dynstr)        }
+    .rel.text      : { *(.rel.text)        }
+    .rela.text     : { *(.rela.text)    }
+    .rel.data      : { *(.rel.data)        }
+    .rela.data     : { *(.rela.data)    }
+    .rel.rodata    : { *(.rel.rodata)    }
+    .rela.rodata   : { *(.rela.rodata)    }
+    .rel.got       : { *(.rel.got)        }
+    .rela.got      : { *(.rela.got)        }
+    .rel.ctors     : { *(.rel.ctors)    }
+    .rela.ctors    : { *(.rela.ctors)    }
+    .rel.dtors     : { *(.rel.dtors)    }
+    .rela.dtors    : { *(.rela.dtors)    }
+    .rel.bss       : { *(.rel.bss)        }
+    .rela.bss      : { *(.rela.bss)        }
+    .rel.plt       : { *(.rel.plt)        }
+    .rela.plt      : { *(.rela.plt)        }
+    .init          : { *(.init)        }
+    .plt : { *(.plt) }
+
+    .text : {
+        _load_addr = .;
+        _text = .;
+
+        *(.start)
+        cpu/leon3/start.o (.text)
+/* 8k is the same as the PROM offset from end of main memory, 
(CFG_PROM_SIZE) */
+        . = ALIGN(8192);
+/* PROM CODE, Will be relocated to the end of memory,
+ * no global data accesses please.
+ */
+        __prom_start = .;
+        *(.prom.pgt)
+        *(.prom.data)
+        *(.prom.text)
+        . = ALIGN(16);
+        __prom_end = .;
+        *(.text)
+        *(.fixup)
+        *(.gnu.warning)
+/*        *(.got1)*/
+        . = ALIGN(16);
+        *(.rodata)
+        *(.rodata1)
+        *(.rodata.*)
+        *(.eh_frame)
+    }
+    . = ALIGN(4);
+    _etext = .;
+
+    /* CMD Table */
+
+    __u_boot_cmd_start = .;
+    .u_boot_cmd : { *(.u_boot_cmd) }
+    . = ALIGN(4);
+    __u_boot_cmd_end = .;
+
+    .data    :
+    {
+        *(.data)
+        *(.data1)
+        *(.data.rel)
+        *(.data.rel.*)
+        *(.sdata)
+        *(.sdata2)
+        *(.dynamic)
+        CONSTRUCTORS
+    }
+    _edata    =    .;
+    PROVIDE (edata = .);
+
+    . = ALIGN(4);
+    __got_start = .;
+    .got : {
+        *(.got)
+/*        *(.data.rel)
+        *(.data.rel.local)*/
+        . = ALIGN(16);
+    }
+    __got_end = .;
+
+/*    .data.rel : { } */
+
+
+    . = ALIGN(4096);
+    __init_begin = .;
+    .text.init : { *(.text.init) }
+    .data.init : { *(.data.init) }
+    . = ALIGN(4096);
+    __init_end = .;
+
+    __bss_start = .;
+    .bss        :
+    {
+     *(.sbss) *(.scommon)
+     *(.dynbss)
+     *(.bss)
+     *(COMMON)
+    . = ALIGN(16); /* to speed clearing of bss up */
+    }
+    __bss_end = . ;
+    _end = . ;
+    PROVIDE (end = .);
+
+/* Relocated into main memory */
+
+    /* Start of main memory */
+    /*. = 0x40000000;*/
+
+    .stack (NOLOAD)    : { *(.stack) }
+
+    /* PROM CODE */
+
+    /* global data in RAM passed to kernel after booting */
+
+
+  .stab 0        : { *(.stab) }
+  .stabstr 0        : { *(.stabstr) }
+  .stab.excl 0        : { *(.stab.excl) }
+  .stab.exclstr 0    : { *(.stab.exclstr) }
+  .stab.index 0        : { *(.stab.index) }
+  .stab.indexstr 0    : { *(.stab.indexstr) }
+  .comment 0        : { *(.comment) }
+
+}
diff --git a/include/configs/gr_xc3s_1500.h b/include/configs/gr_xc3s_1500.h
new file mode 100644
index 0000000..1fdef3d
--- /dev/null
+++ b/include/configs/gr_xc3s_1500.h
@@ -0,0 +1,321 @@
+/* Configuration header file for Gaisler GR-XC3S-1500
+ * spartan board.
+ *
+ * (C) Copyright 2003-2005
+ * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+ *
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, daniel at gaisler.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.     See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H__
+#define __CONFIG_H__
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_LEON3        /* This is an LEON3 CPU */
+#define CONFIG_LEON        1    /* This is an LEON CPU */
+#define CONFIG_GRXC3S1500    1    /* ... on GR-XC3S-1500 board */
+
+/* CPU / AMBA BUS configuration */
+#define CONFIG_SYS_CLK_FREQ     40000000    /* 40MHz */
+
+/* Number of SPARC register windows */
+#define CFG_SPARC_NWINDOWS 8
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_BAUDRATE        38400    /* ... at 38400 bps */
+#define CFG_BAUDRATE_TABLE    { 9600, 19200, 38400, 57600, 115200, 230400 }
+
+/* Partitions */
+#define CONFIG_DOS_PARTITION
+#define CONFIG_MAC_PARTITION
+#define CONFIG_ISO_PARTITION
+
+/*
+ * Supported commands
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_AMBAPP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_IRQ
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY    5    /* autoboot after 5 seconds */
+
+#define CONFIG_PREBOOT    "echo;"    \
+    "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+    "echo"
+
+#undef    CONFIG_BOOTARGS
+
+#define    CONFIG_EXTRA_ENV_SETTINGS                    \
+    "netdev=eth0\0"                            \
+    "nfsargs=setenv bootargs console=ttyS0,38400 root=/dev/nfs rw "    \
+        "nfsroot=${serverip}:${rootpath}\0"            \
+    "ramargs=setenv bootargs console=ttyS0,${baudrate} root=/dev/ram 
rw\0"            \
+    "addip=setenv bootargs ${bootargs} "                \
+        "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"    \
+        ":${hostname}:${netdev}:off panic=1\0"            \
+    "flash_nfs=run nfsargs addip;"                    \
+        "bootm ${kernel_addr}\0"                \
+    "flash_self=run ramargs addip;"                    \
+        "bootm ${kernel_addr} ${ramdisk_addr}\0"        \
+    "net_nfs=tftp 40000000 ${bootfile};run nfsargs addip;bootm\0"    \
+    "scratch=40200000\0"                    \
+    "getkernel=tftpboot \$\(scratch\)\ \$\(bootfile\)\0" \
+    "bootargs=console=ttyS0,38400 root=/dev/nfs rw 
nfsroot=192.168.0.20:/export/rootfs 
ip=192.168.0.206:192.168.0.20:192.168.0.1:255.255.255.0:grxc3s1500_daniel:eth0\0" 
\
+    ""
+
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_GATEWAYIP 192.168.0.1
+#define CONFIG_SERVERIP 192.168.0.20
+#define CONFIG_IPADDR 192.168.0.206
+#define CONFIG_ROOTPATH /export/rootfs
+#define CONFIG_HOSTNAME  grxc3s1500
+#define CONFIG_BOOTFILE  /uImage
+
+#define CONFIG_BOOTCOMMAND    "run flash_self"
+
+/* Memory MAP
+ *
+ *  Flash:
+ *  |--------------------------------|
+ *  | 0x00000000 Text & Data & BSS   | *
+ *  |            for Monitor         | *
+ *  | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~| *
+ *  | UNUSED / Growth                | * 256kb
+ *  |--------------------------------|
+ *  | 0x00050000 Base custom area    | *
+ *  |            kernel / FS         | *
+ *  |                                | * Rest of Flash
+ *  |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
+ *  | END-0x00008000 Environment     | * 32kb
+ *  |--------------------------------|
+ *
+ *
+ *
+ *  Main Memory:
+ *  |--------------------------------|
+ *  | UNUSED / scratch area          |
+ *  |                                |
+ *  |                                |
+ *  |                                |
+ *  |                                |
+ *  |--------------------------------|
+ *  | Monitor .Text / .DATA / .BSS   | * 256kb
+ *  | Relocated!                     | *
+ *  |--------------------------------|
+ *  | Monitor Malloc                 | * 128kb (contains relocated 
environment)
+ *  |--------------------------------|
+ *  | Monitor/kernel STACK           | * 64kb
+ *  |--------------------------------|
+ *  | Page Table for MMU systems     | * 2k
+ *  |--------------------------------|
+ *  | PROM Code accessed from Linux  | * 6kb-128b
+ *  |--------------------------------|
+ *  | Global data (avail from kernel)| * 128b
+ *  |--------------------------------|
+ *
+ */
+
+/*
+ * Flash configuration (8,16 or 32 MB)
+ * TEXT base always at 0xFFF00000
+ * ENV_ADDR always at  0xFFF40000
+ * FLASH_BASE at 0xFC000000 for 64 MB
+ *               0xFE000000 for 32 MB
+ *               0xFF000000 for 16 MB
+ *               0xFF800000 for  8 MB
+ */
+/*#define CFG_NO_FLASH        1*/
+#define CFG_FLASH_BASE        0x00000000
+#define CFG_FLASH_SIZE        0x00800000
+
+#define PHYS_FLASH_SECT_SIZE    0x00020000    /* 128 KB sectors */
+#define CFG_MAX_FLASH_SECT    64    /* max num of sects on one chip */
+#define CFG_MAX_FLASH_BANKS    1    /* max num of memory banks      */
+
+#define CFG_FLASH_ERASE_TOUT    240000    /* Flash Erase Timeout (in 
ms)  */
+#define CFG_FLASH_WRITE_TOUT    500    /* Flash Write Timeout (in ms)  */
+#define CFG_FLASH_LOCK_TOUT    5    /* Timeout for Flash Set Lock Bit 
(in ms) */
+#define CFG_FLASH_UNLOCK_TOUT    10000    /* Timeout for Flash Clear 
Lock Bits (in ms) */
+#define CFG_FLASH_PROTECTION    /* "Real" (hardware) sectors protection */
+
+/*** CFI CONFIG ***/
+#define CFG_FLASH_CFI_WIDTH    FLASH_CFI_8BIT
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+/* Bypass cache when reading regs from flash memory */
+#define CFG_FLASH_CFI_BYPASS_READ
+/* Buffered writes (32byte/go) instead of single accesses */
+#define CFG_FLASH_USE_BUFFER_WRITE
+
+/*
+ * Environment settings
+ */
+/*#define CFG_ENV_IS_NOWHERE 1*/
+#define CFG_ENV_IS_IN_FLASH    1
+/* CFG_ENV_ADDR need to be at sector boundary */
+#define CFG_ENV_SIZE        0x8000
+#define CFG_ENV_SECT_SIZE    0x20000
+#define CFG_ENV_ADDR       
 (CFG_FLASH_BASE+CFG_FLASH_SIZE-CFG_ENV_SECT_SIZE)
+#define CONFIG_ENV_OVERWRITE    1
+
+/*
+ * Memory map
+ */
+#define CFG_SDRAM_BASE        0x40000000
+#define CFG_SDRAM_SIZE        0x4000000
+#define CFG_SDRAM_END        (CFG_SDRAM_BASE+CFG_SDRAM_SIZE)
+
+/* no SRAM available */
+#undef CFG_SRAM_BASE
+#undef CFG_SRAM_SIZE
+
+/* Always Run U-Boot from SDRAM */
+#define CFG_RAM_BASE CFG_SDRAM_BASE
+#define CFG_RAM_SIZE CFG_SDRAM_SIZE
+#define CFG_RAM_END CFG_SDRAM_END
+
+#define CFG_GBL_DATA_SIZE    128    /* size in bytes reserved for 
initial data */
+#define CFG_GBL_DATA_OFFSET    (CFG_RAM_END - CFG_GBL_DATA_SIZE)
+
+#define CFG_PROM_SIZE        (8192-CFG_GBL_DATA_SIZE)
+#define CFG_PROM_OFFSET        (CFG_GBL_DATA_OFFSET-CFG_PROM_SIZE)
+
+#define CFG_INIT_SP_OFFSET    (CFG_PROM_OFFSET-32)
+#define CFG_STACK_SIZE        (0x10000-32)
+
+#define CFG_MONITOR_BASE    TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#   define CFG_RAMBOOT        1
+#endif
+
+#define CFG_MONITOR_LEN        (256 << 10)    /* Reserve 256 kB for 
Monitor   */
+#define CFG_MALLOC_LEN        (128 << 10)    /* Reserve 128 kB for 
malloc()  */
+#define CFG_BOOTMAPSZ        (8 << 20)    /* Initial Memory map for 
Linux */
+
+#define CFG_MALLOC_END        (CFG_INIT_SP_OFFSET-CFG_STACK_SIZE)
+#define CFG_MALLOC_BASE        (CFG_MALLOC_END-CFG_MALLOC_LEN)
+
+/* relocated monitor area */
+#define CFG_RELOC_MONITOR_MAX_END   CFG_MALLOC_BASE
+#define CFG_RELOC_MONITOR_BASE     
(CFG_RELOC_MONITOR_MAX_END-CFG_MONITOR_LEN)
+
+/* make un relocated address from relocated address */
+#define UN_RELOC(address) (address-(CFG_RELOC_MONITOR_BASE-TEXT_BASE))
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_GRETH    1
+#define CONFIG_NET_MULTI    1
+
+/* Default GRETH Ethernet HARDWARE address */
+#define GRETH_HWADDR_0 0x00
+#define GRETH_HWADDR_1 0x00
+#define GRETH_HWADDR_2 0x7a
+#define GRETH_HWADDR_3 0xcc
+#define GRETH_HWADDR_4 0x00
+#define GRETH_HWADDR_5 0x12
+
+#define CONFIG_ETHADDR   00:00:7a:cc:00:12
+#define CONFIG_PHY_ADDR     0x00
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP        /* undef to save memory     */
+#define CFG_PROMPT        "=> "    /* Monitor Command Prompt   */
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE        1024    /* Console I/O Buffer Size  */
+#else
+#define CFG_CBSIZE        256    /* Console I/O Buffer Size  */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)    /* Print 
Buffer Size */
+#define CFG_MAXARGS        16    /* max number of command args   */
+#define CFG_BARGSIZE        CFG_CBSIZE    /* Boot Argument Buffer 
Size    */
+
+#define CFG_MEMTEST_START    0x00100000    /* memtest works on */
+#define CFG_MEMTEST_END        0x00f00000    /* 1 ... 15 MB in DRAM  */
+
+#define CFG_LOAD_ADDR        0x100000    /* default load address */
+
+#define CFG_HZ            1000    /* decrementer freq: 1 ms ticks */
+
+/*
+ * Various low-level settings
+ */
+
+/*-----------------------------------------------------------------------
+ * USB stuff
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_USB_CLOCK    0x0001BBBB
+#define CONFIG_USB_CONFIG    0x00005000
+
+/***** Gaisler GRLIB IP-Cores Config ********/
+
+/* AMBA Plug & Play info display on startup */
+/*#define CFG_AMBAPP_PRINT_ON_STARTUP*/
+
+#define CFG_GRLIB_SDRAM    0
+
+/* See, GRLIB Docs (grip.pdf) on how to set up
+ * These the memory controller registers.
+ */
+#define CFG_GRLIB_MEMCFG1   (0x000000ff | (1<<11))
+#define CFG_GRLIB_MEMCFG2   0x82206000
+#define CFG_GRLIB_MEMCFG3   0x00136000
+
+#define CFG_GRLIB_FT_MEMCFG1   (0x000000ff | (1<<11))
+#define CFG_GRLIB_FT_MEMCFG2   0x82206000
+#define CFG_GRLIB_FT_MEMCFG3   0x00136000
+
+/* no DDR controller */
+#define CFG_GRLIB_DDR_CFG   0x00000000
+
+/* no DDR2 Controller */
+#define CFG_GRLIB_DDR2_CFG1 0x00000000
+#define CFG_GRLIB_DDR2_CFG3 0x00000000
+
+/* Calculate scaler register value from default baudrate */
+#define CFG_GRLIB_APBUART_SCALER \
+ ((((CONFIG_SYS_CLK_FREQ*10)/(CONFIG_BAUDRATE*8))-5)/10)
+
+/* Identification string */
+#define CONFIG_IDENT_STRING "GAISLER LEON3 GR-XC3S-1500"
+
+/* default kernel command line */
+#define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0"
+
+#endif                /* __CONFIG_H */