From: lokowich <lokowich@acdstar.com>
To: ALSA-devel <alsa-devel@alsa-project.org>
Subject: [Fwd: Re: Davinci ASoC support (patch)]
Date: Fri, 28 Mar 2008 09:27:04 -0500 [thread overview]
Message-ID: <47ED0038.9020808@acdstar.com> (raw)
Forwarded from davinci-linux-open-source list:
I've built this ASoC patch into my DaVinci git kernel (thanks for the
SENSORS tip), and can use aplay and speaker-test, but no sound. Figured
it may be a mixer/volume control issue, but the alsamixer is unable to
open for a failed ioctl on USBDEVFS_IOCTL. Not sure why there is a USB
dependency. Noted that there is no /sys/class/sound/mixer in my sysfs.
Any ideas?
Mark
Bernard Blackham wrote:
> Behme wrote:
>
>> While searching something different, I just found
>>
>> http://www.spinics.net/lists/alsa-devel/msg12535.html
>>
>> As I'm not subscribed to alsa-devel, I don't have the original post.
>> Maybe any of the authors can post it do this list as well?
>>
>> The patch mainly applies to our git. I fixed two small rejects in
>> Kconfig and Makefile as the patch is for newer kernel than our git.
>> Untested patch against our git in attachment. Anybody likes to test?
>>
>
> Well, I tried compiling it and it failed to build. It appears that it's
> built on a set of patches for Davinci posted to LAK, including this
> completely revamped EDMA support[1]:
>
> http://www.spinics.net/lists/arm-kernel/msg47450.html
>
> So I had to change a few definitions, import a few functions from the new
> DMA support and managed to get it compiling and loading, but not yet working
> (tried various sample rates and formats):
>
> root@davinci-dvevm:/tst$ aplay test.wav
> Playing WAVE 'test.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
> ALSA lib pcm_params.c:2152:(snd_pcm_hw_refine_slave) Slave PCM not usable
> aplay: set_params:878: Broken configuration for this PCM: no configurations
> available
>
> root@davinci-dvevm:/tst$ arecord -r 48000 -f S16_LE
> Recording WAVE 'stdin' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
> ALSA lib pcm_params.c:2152:(snd_pcm_hw_refine_slave) Slave PCM not usable
> arecord: set_params:878: Broken configuration for this PCM: no
> configurations available
>
>
> And this is the extent of my knowledge of ALSA - I can continue digging, but
> maybe somebody else will beat me to it =) It's looking promising though.
>
> Attached is the patch I have so far that applies against current git. This
> is not for going upstream, but just for testing. Notes:
> - Apply patch
> - Enable SND_SOC, SND_DAVINCI_SOC, SND_DAVINCI_SOC_I2S, SND_DAVINCI_SOC_EVM
> and SND_SOC_TLV320AIC3X.
> - Make sure CONFIG_I2C_DAVINCI is enabled, but disable the
> CONFIG_SENSORS_TLV320* options.
> - Build.
> - Load the snd-soc-evm module.
>
> Bernard.
>
> [1] These patches appear to have gone absolutely nowhere beyond that list. I
> can't find them in any tree. But they are cleaner and more conforming to the
> Linux Kernel style than what's currently in git.
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Davinci-linux-open-source mailing list
> Davinci-linux-open-source@linux.davincidsp.com
> http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
>
next reply other threads:[~2008-03-28 14:27 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-28 14:27 lokowich [this message]
2008-03-28 15:03 ` [Fwd: Re: Davinci ASoC support (patch)] Mark Brown
2008-03-28 15:39 ` Any wigets for ADC to DAC ? Alexandre BOUIN
2008-03-28 16:46 ` ALSA Lib : snd_dlopen lib error Alexandre BOUIN
2008-03-28 23:13 ` [Fwd: Re: Davinci ASoC support (patch)] Vova Barinov
[not found] ` <47F0E8C0.5070907@acdstar.com>
2008-04-01 20:08 ` Vova Barinov
-- strict thread matches above, loose matches on Subject: below --
2008-03-31 20:30 lokowich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47ED0038.9020808@acdstar.com \
--to=lokowich@acdstar.com \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.