root@vdr:/usr/local/src/multiproto# modprobe dvb-core cam_debug=3D1
root@vdr:/usr/local/src/multiproto# modprobe budget-core debug=3D255
root@vdr:/usr/local/src/multiproto# modprobe budget-av
root@vdr:/usr/local/src/multiproto# dmesg
Linux video capture interface: v2.00
saa7146: register extension 'budget_av'.
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 22 (level, low) -> IRQ 22
saa7146: found saa7146 @ mem e0e5a000 (revision 1, irq 22) (0x153b,0x1156).
budget_av: budget_av_attach(): dev: dd2e5600
budget_core: ttpci_budget_init(): dev: dd2e5600, budget: de19a800
budget_core: ttpci_budget_init(): saa7146 (0): buffer type = single, width = 188, height = 1024
saa7146 (0): dma buffer size 192512
DVB: registering new adapter (Terratec Cinergy 1200 DVB-C)
adapter failed MAC signature check
encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff
budget_core: budget_register(): budget: de19a800
budget_av: saa7113_init(): saa7113 not found on KNC card
KNC1-0: MAC addr = 00:0a:ac:11:00:21
TDA10021: i2c-addr = 0x0c, id = 0x7c
DVB: registering frontend 0 (Philips TDA10021 DVB-C)...
dvb_ca_en50221_init
budget-av: ci interface initialised.
dvb_ca_en50221_thread
budget-av: cam inserted A
budget_av: ciintf_slot_reset(): ciintf_slot_reset
TUPLE type:0x1d length:4
  0x00: 0x00 .
  0x01: 0xdb .
  0x02: 0x08 .
  0x03: 0xff .
TUPLE type:0x1c length:3
  0x00: 0x00 .
  0x01: 0x08 .
  0x02: 0xff .
TUPLE type:0x15 length:27
  0x00: 0x05 .
  0x01: 0x00 .
  0x02: 0x54 T
  0x03: 0x65 e
  0x04: 0x63 c
  0x05: 0x68 h
  0x06: 0x6e n
  0x07: 0x69 i
  0x08: 0x53 S
  0x09: 0x61 a
  0x0a: 0x74 t
  0x0b: 0x00 .
  0x0c: 0x44 D
  0x0d: 0x56 V
  0x0e: 0x42 B
  0x0f: 0x20
  0x10: 0x43 C
  0x11: 0x41 A
  0x12: 0x20
  0x13: 0x4d M
  0x14: 0x6f o
  0x15: 0x64 d
  0x16: 0x75 u
  0x17: 0x6c l
  0x18: 0x65 e
  0x19: 0x00 .
  0x1a: 0xff .
TUPLE type:0x20 length:4
  0x00: 0x03 .
  0x01: 0x3d =
  0x02: 0x00 .
  0x03: 0x00 .
TUPLE type:0x1a length:21
  0x00: 0x01 .
  0x01: 0x0f .
  0x02: 0x00 .
  0x03: 0x02 .
  0x04: 0x01 .
  0x05: 0xc0 .
  0x06: 0x0e .
  0x07: 0x41 A
  0x08: 0x02 .
  0x09: 0x44 D
  0x0a: 0x56 V
  0x0b: 0x42 B
  0x0c: 0x5f _
  0x0d: 0x43 C
  0x0e: 0x49 I
  0x0f: 0x5f _
  0x10: 0x56 V
  0x11: 0x31 1
  0x12: 0x2e .
  0x13: 0x30 0
  0x14: 0x30 0
TUPLE type:0x1b length:37
  0x00: 0xcf .
  0x01: 0x04 .
  0x02: 0x09 .
  0x03: 0x37 7
  0x04: 0x55 U
  0x05: 0x4d M
  0x06: 0x5d ]
  0x07: 0x1d .
  0x08: 0x56 V
  0x09: 0x22 "
  0x0a: 0xc0 .
  0x0b: 0x09 .
  0x0c: 0x44 D
  0x0d: 0x56 V
  0x0e: 0x42 B
  0x0f: 0x5f _
  0x10: 0x48 H
  0x11: 0x4f O
  0x12: 0x53 S
  0x13: 0x54 T
  0x14: 0x00 .
  0x15: 0xc1 .
  0x16: 0x0e .
  0x17: 0x44 D
  0x18: 0x56 V
  0x19: 0x42 B
  0x1a: 0x5f _
  0x1b: 0x43 C
  0x1c: 0x49 I
  0x1d: 0x5f _
  0x1e: 0x4d M
  0x1f: 0x4f O
  0x20: 0x44 D
  0x21: 0x55 U
  0x22: 0x4c L
  0x23: 0x45 E
  0x24: 0x00 .
TUPLE type:0x14 length:0
END OF CHAIN TUPLE type:0xff
Valid DVB CAM detected MANID:3d03 DEVID:0 CONFIGBASE:0x200 CONFIGOPTION:0xf
dvb_ca_en50221_set_configoption
Set configoption 0xf, read configoption 0xf
DVB CAM validated successfully
dvb_ca_en50221_link_init
dvb_ca_en50221_wait_if_status
dvb_ca_en50221_wait_if_status succeeded timeout:0
dvb_ca_en50221_read_data
Received CA packet for slot 0 connection id 0x0 last_frag:1 size:0x2
Chosen link buffer size of 16
dvb_ca_en50221_wait_if_status
dvb_ca_en50221_wait_if_status succeeded timeout:0
dvb_ca_en50221_write_data
Wrote CA packet for slot 0, connection id 0x0 last_frag:1 size:0x2
budget_av: ciintf_slot_ts_enable(): ciintf_slot_ts_enable: 8
dvb_ca adapter 0: DVB CAM detected and initialised successfully
