From: Anssi Hannula <anssi.hannula@gmail.com>
To: Jiri Kosina <jkosina@suse.cz>
Cc: linux-input@vger.kernel.org
Subject: [patch] hid: force feedback support for Logitech Rumblepad 2
Date: Mon, 31 Mar 2008 22:42:46 +0300 [thread overview]
Message-ID: <47F13EB6.2090200@gmail.com> (raw)
Add force feedback support for Logitech Rumblepad 2.
Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com>
Tested-By: Edgar Simo <bobbens@gmail.com>
---
Index: linux-2.6.24-hid-rumble/drivers/hid/usbhid/Kconfig
===================================================================
--- linux-2.6.24-hid-rumble/drivers/hid/usbhid/Kconfig
+++ linux-2.6.24-hid-rumble/drivers/hid/usbhid/Kconfig 2008-03-21 12:38:05.000000000 +0200
@@ -70,6 +70,14 @@
Note: if you say N here, this device will still be supported, but without
force feedback.
+config LOGIRUMBLEPAD2_FF
+ bool "Logitech Rumblepad 2 support"
+ depends on HID_FF
+ select INPUT_FF_MEMLESS if USB_HID
+ help
+ Say Y here if you want to enable force feedback support for Logitech
+ Rumblepad 2 devices.
+
config PANTHERLORD_FF
bool "PantherLord/GreenAsia based device support"
depends on HID_FF
Index: linux-2.6.24-hid-rumble/drivers/hid/usbhid/Makefile
===================================================================
--- linux-2.6.24-hid-rumble/drivers/hid/usbhid/Makefile
+++ linux-2.6.24-hid-rumble/drivers/hid/usbhid/Makefile 2008-03-21 12:47:21.000000000 +0200
@@ -16,6 +16,9 @@
ifeq ($(CONFIG_LOGITECH_FF),y)
usbhid-objs += hid-lgff.o
endif
+ifeq ($(CONFIG_LOGIRUMBLEPAD2_FF),y)
+ usbhid-objs += hid-lg2ff.o
+endif
ifeq ($(CONFIG_PANTHERLORD_FF),y)
usbhid-objs += hid-plff.o
endif
Index: linux-2.6.24-hid-rumble/drivers/hid/usbhid/hid-ff.c
===================================================================
--- linux-2.6.24-hid-rumble/drivers/hid/usbhid/hid-ff.c
+++ linux-2.6.24-hid-rumble/drivers/hid/usbhid/hid-ff.c 2008-03-21 12:24:40.000000000 +0200
@@ -59,6 +59,9 @@
{ 0x46d, 0xc295, hid_lgff_init }, /* Logitech MOMO force wheel */
{ 0x46d, 0xca03, hid_lgff_init }, /* Logitech MOMO force wheel */
#endif
+#ifdef CONFIG_LOGIRUMBLEPAD2_FF
+ { 0x46d, 0xc218, hid_lg2ff_init }, /* Logitech Rumblepad 2 */
+#endif
#ifdef CONFIG_PANTHERLORD_FF
{ 0x810, 0x0001, hid_plff_init }, /* "Twin USB Joystick" */
{ 0xe8f, 0x0003, hid_plff_init }, /* "GreenAsia Inc. USB Joystick " */
Index: linux-2.6.24-hid-rumble/drivers/hid/usbhid/hid-lg2ff.c
===================================================================
--- linux-2.6.24-hid-rumble/drivers/hid/usbhid/hid-lg2ff.c
+++ linux-2.6.24-hid-rumble/drivers/hid/usbhid/hid-lg2ff.c 2008-03-31 22:33:19.000000000 +0300
@@ -0,0 +1,114 @@
+/*
+ * Force feedback support for Logitech Rumblepad 2
+ *
+ * Copyright (c) 2008 Anssi Hannula <anssi.hannula@gmail.com>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+
+#include <linux/input.h>
+#include <linux/usb.h>
+#include <linux/hid.h>
+#include "usbhid.h"
+
+struct lg2ff_device {
+ struct hid_report *report;
+};
+
+static int play_effect(struct input_dev *dev, void *data,
+ struct ff_effect *effect)
+{
+ struct hid_device *hid = input_get_drvdata(dev);
+ struct lg2ff_device *lg2ff = data;
+ int weak, strong;
+
+ strong = effect->u.rumble.strong_magnitude;
+ weak = effect->u.rumble.weak_magnitude;
+
+ if (weak || strong) {
+ weak = weak * 0xff / 0xffff;
+ strong = strong * 0xff / 0xffff;
+
+ lg2ff->report->field[0]->value[0] = 0x51;
+ lg2ff->report->field[0]->value[2] = weak;
+ lg2ff->report->field[0]->value[4] = strong;
+ } else {
+ lg2ff->report->field[0]->value[0] = 0xf3;
+ lg2ff->report->field[0]->value[2] = 0x00;
+ lg2ff->report->field[0]->value[4] = 0x00;
+ }
+
+ usbhid_submit_report(hid, lg2ff->report, USB_DIR_OUT);
+ return 0;
+}
+
+int hid_lg2ff_init(struct hid_device *hid)
+{
+ struct lg2ff_device *lg2ff;
+ struct hid_report *report;
+ struct hid_input *hidinput = list_entry(hid->inputs.next,
+ struct hid_input, list);
+ struct list_head *report_list =
+ &hid->report_enum[HID_OUTPUT_REPORT].report_list;
+ struct input_dev *dev = hidinput->input;
+ int error;
+
+ if (list_empty(report_list)) {
+ printk(KERN_ERR "hid-lg2ff: no output report found\n");
+ return -ENODEV;
+ }
+
+ report = list_entry(report_list->next, struct hid_report, list);
+
+ if (report->maxfield < 1) {
+ printk(KERN_ERR "hid-lg2ff: output report is empty\n");
+ return -ENODEV;
+ }
+ if (report->field[0]->report_count < 7) {
+ printk(KERN_ERR "hid-lg2ff: not enough values in the field\n");
+ return -ENODEV;
+ }
+
+ lg2ff = kmalloc(sizeof(struct lg2ff_device), GFP_KERNEL);
+ if (!lg2ff)
+ return -ENOMEM;
+
+ set_bit(FF_RUMBLE, dev->ffbit);
+
+ error = input_ff_create_memless(dev, lg2ff, play_effect);
+ if (error) {
+ kfree(lg2ff);
+ return error;
+ }
+
+ lg2ff->report = report;
+ report->field[0]->value[0] = 0xf3;
+ report->field[0]->value[1] = 0x00;
+ report->field[0]->value[2] = 0x00;
+ report->field[0]->value[3] = 0x00;
+ report->field[0]->value[4] = 0x00;
+ report->field[0]->value[5] = 0x00;
+ report->field[0]->value[6] = 0x00;
+
+ usbhid_submit_report(hid, report, USB_DIR_OUT);
+
+ printk(KERN_INFO "Force feedback for Logitech Rumblepad 2 by "
+ "Anssi Hannula <anssi.hannula@gmail.com>\n");
+
+ return 0;
+}
Index: linux-2.6.24-hid-rumble/include/linux/hid.h
===================================================================
--- linux-2.6.24-hid-rumble/include/linux/hid.h
+++ linux-2.6.24-hid-rumble/include/linux/hid.h 2008-03-21 12:32:32.000000000 +0200
@@ -536,6 +536,7 @@
int hid_ff_init(struct hid_device *hid);
int hid_lgff_init(struct hid_device *hid);
+int hid_lg2ff_init(struct hid_device *hid);
int hid_plff_init(struct hid_device *hid);
int hid_tmff_init(struct hid_device *hid);
int hid_zpff_init(struct hid_device *hid);
--
Anssi Hannula
reply other threads:[~2008-03-31 19:42 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47F13EB6.2090200@gmail.com \
--to=anssi.hannula@gmail.com \
--cc=jkosina@suse.cz \
--cc=linux-input@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.