From: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
To: kvm-ppc@vger.kernel.org
Subject: [kvm-ppc-devel] Profile kvmppc - #2 - guest idles two minutes in
Date: Fri, 04 Apr 2008 11:03:58 +0000 [thread overview]
Message-ID: <47F60B1E.6060802@linux.vnet.ibm.com> (raw)
Well without real perf counters it's semi-useless (might be misleading) but anyway here what I got so far - #2 - guest idles two minutes in shell prompt:
bash-3.00# opreport --session-dir=/mnt/usb/oprofile_idle/
CPU: CPU with timer interrupt, speed 0 MHz (estimated)
Profiling through timer interrupt
TIMER:0|
samples| %|
------------------
4818 nan vmlinux.host
36 nan qemu-system-ppcemb.viob_v1
26 nan libc-2.3.5.so
9 nan bash
7 nan ld-2.3.5.so
5 nan oprofiled
4 nan libpthread-2.3.5.so
1 nan librt-2.3.5.so
1 nan libpopt.so.0.0.0
Details:
bash-3.00# opreport --session-dir=/mnt/usb/oprofile_idle/ -l
CPU: CPU with timer interrupt, speed 0 MHz (estimated)
Profiling through timer interrupt
samples % app name symbol name
1625 nan vmlinux.host cpu_idle
1325 nan vmlinux.host kvmppc_handle_exit
730 nan vmlinux.host finish_task_switch
600 nan vmlinux.host tick_nohz_stop_sched_tick
129 nan vmlinux.host kvmppc_emulate_instruction
102 nan vmlinux.host tick_nohz_restart_sched_tick
63 nan vmlinux.host schedule
39 nan vmlinux.host do_softirq
31 nan vmlinux.host __do_softirq
27 nan vmlinux.host run_timer_softirq
26 nan libc-2.3.5.so (no symbols)
20 nan vmlinux.host ksoftirqd
14 nan vmlinux.host hrtimer_run_pending
10 nan vmlinux.host _cond_resched
9 nan bash (no symbols)
7 nan ld-2.3.5.so (no symbols)
7 nan vmlinux.host copy_page
4 nan qemu-system-ppcemb.viob_v1 kvm_run
4 nan vmlinux.host do_page_fault
4 nan vmlinux.host sigprocmask
4 nan vmlinux.host sys_select
3 nan qemu-system-ppcemb.viob_v1 __divdi3
3 nan qemu-system-ppcemb.viob_v1 dynticks_rearm_timer
3 nan qemu-system-ppcemb.viob_v1 kvm_arch_post_kvm_run
3 nan qemu-system-ppcemb.viob_v1 kvm_main_loop_cpu
3 nan qemu-system-ppcemb.viob_v1 post_kvm_run
3 nan qemu-system-ppcemb.viob_v1 virtio_net_poll
3 nan vmlinux.host __flush_dcache_icache
3 nan vmlinux.host do_select
3 nan vmlinux.host do_vfs_ioctl
3 nan vmlinux.host do_wp_page
3 nan vmlinux.host getnstimeofday
3 nan vmlinux.host sys_rt_sigtimedwait
3 nan vmlinux.host sys_timer_settime
2 nan libpthread-2.3.5.so __pthread_mutex_unlock_usercnt
2 nan qemu-system-ppcemb.viob_v1 __moddi3
2 nan vmlinux.host DoSyscall
2 nan vmlinux.host __mod_timer
2 nan vmlinux.host find_lock_page
2 nan vmlinux.host find_vma
2 nan vmlinux.host get_user_pages
2 nan vmlinux.host handle_IRQ_event
2 nan vmlinux.host kthread_should_stop
2 nan vmlinux.host kvmppc_44x_tlb_index
2 nan vmlinux.host sys_timer_gettime
2 nan vmlinux.host vm_normal_page
1 nan libpopt.so.0.0.0 (no symbols)
1 nan libpthread-2.3.5.so __errno_location
1 nan libpthread-2.3.5.so __libc_sigaction
1 nan librt-2.3.5.so (no symbols)
1 nan oprofiled clear_trans_current
1 nan oprofiled odb_update_node
1 nan oprofiled opd_process_samples
1 nan oprofiled pop_buffer_value
1 nan oprofiled sfile_put
1 nan qemu-system-ppcemb.viob_v1 dumb_refresh
1 nan qemu-system-ppcemb.viob_v1 gui_update
1 nan qemu-system-ppcemb.viob_v1 handle_io_window
1 nan qemu-system-ppcemb.viob_v1 kvm_eat_signal
1 nan qemu-system-ppcemb.viob_v1 main_loop_wait
1 nan qemu-system-ppcemb.viob_v1 qemu_del_timer
1 nan qemu-system-ppcemb.viob_v1 qemu_kvm_cpu_env
1 nan qemu-system-ppcemb.viob_v1 qemu_mod_timer
1 nan qemu-system-ppcemb.viob_v1 qemu_run_timers
1 nan qemu-system-ppcemb.viob_v1 qemu_shutdown_requested
1 nan qemu-system-ppcemb.viob_v1 tap_read_poll
1 nan qemu-system-ppcemb.viob_v1 virtio_net_can_receive
1 nan vmlinux.host __copy_tofrom_user
1 nan vmlinux.host __kfree_skb
1 nan vmlinux.host __rpc_execute
1 nan vmlinux.host __wake_up_bit
1 nan vmlinux.host copy_page_range
1 nan vmlinux.host copy_siginfo_to_user
1 nan vmlinux.host core_sys_select
1 nan vmlinux.host csum_partial
1 nan vmlinux.host down_write
1 nan vmlinux.host emac_poll_tx
1 nan vmlinux.host filemap_fault
1 nan vmlinux.host find_extend_vma
1 nan vmlinux.host find_next_bit
1 nan vmlinux.host find_vma_prev
1 nan vmlinux.host gfn_to_hva
1 nan vmlinux.host handle_mm_fault
1 nan vmlinux.host handle_page_fault
1 nan vmlinux.host ip_generic_getfrag
1 nan vmlinux.host ktime_get_ts
1 nan vmlinux.host kvm_arch_vcpu_ioctl_run
1 nan vmlinux.host kvmppc_check_and_deliver_interrupts
1 nan vmlinux.host kvmppc_emulate_dec
1 nan vmlinux.host kvmppc_mmu_map
1 nan vmlinux.host lock_sock_nested
1 nan vmlinux.host lock_timer_base
1 nan vmlinux.host mark_page_accessed
1 nan vmlinux.host mprotect_fixup
1 nan vmlinux.host mutex_lock
1 nan vmlinux.host nfs_permission
1 nan vmlinux.host normal_poll
1 nan vmlinux.host ppc_select
1 nan vmlinux.host remove_wait_queue
1 nan vmlinux.host rpcauth_lookup_credcache
1 nan vmlinux.host rt_hash_code
1 nan vmlinux.host sys_ioctl
1 nan vmlinux.host sys_read
1 nan vmlinux.host syscall_dotrace_cont
1 nan vmlinux.host tty_ldisc_deref
1 nan vmlinux.host udp_push_pending_frames
1 nan vmlinux.host udp_sendmsg
1 nan vmlinux.host unmap_vmas
1 nan vmlinux.host unx_marshal
1 nan vmlinux.host vfs_ioctl
--
Grüsse / regards,
Christian Ehrhardt
IBM Linux Technology Center, Open Virtualization
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
kvm-ppc-devel mailing list
kvm-ppc-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/kvm-ppc-devel
reply other threads:[~2008-04-04 11:03 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47F60B1E.6060802@linux.vnet.ibm.com \
--to=ehrhardt@linux.vnet.ibm.com \
--cc=kvm-ppc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.