From: Bachman Kharazmi <bachman@tor.lindesign.se>
To: Tomas Winkler <tomasw@gmail.com>
Cc: Johannes Berg <johannes@sipsolutions.net>,
linux-wireless@vger.kernel.org
Subject: [SOLVED] Re: compat-wireless iwl4965 on hp/compaq 2510p
Date: Sat, 05 Apr 2008 16:39:43 +0200 [thread overview]
Message-ID: <47F78F2F.8000605@tor.lindesign.se> (raw)
In-Reply-To: <47F78349.8080704@tor.lindesign.se>
Here's what I did:
(-Compiled my own 2.6.24-4 instead of using debian kernel.)
-Booted XPee and hoped that all the clicking enabled the WLAN device. It
seem to be a software button, like a touch panel.
-Entered BIOS, disabled switching wlan button to hopefully keep the
state constant(ON).
And finally I did configure my WEP, and requested IP and now I'm online ;)
thx guys! /Bachman
Bachman Kharazmi wrote:
> Not that easy.
> When the module is loaded I press the (touch) panel where the wireless
> icon is. This still doesn't turn on the WLAN LED.
> Nothing in dmesg then I press the touchbutton.
>
> lapp:/tmp# cat /sys/bus/pci/drivers/iwl4965/0000\:10\:00.0/rf_kill
> 2
>
> echo "1" > /sys/bus/pci/drivers/iwl4965/0000\:10\:00.0/rf_kill
> iwl4965: Error sending REPLY_CARD_STATE_CMD: enqueue_hcmd failed: -5
>
> echo "0" > /sys/bus/pci/drivers/iwl4965/0000\:10\:00.0/rf_kill
> iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC
>
> lapp:/tmp# cat /sys/bus/pci/drivers/iwl4965/0000\:10\:00.0/rf_kill
> 2
>
> /Bachman
> Tomas Winkler wrote:
>> On Sat, Apr 5, 2008 at 3:01 PM, Bachman Kharazmi
>> <bachman@tor.lindesign.se> wrote:
>>> lapp:/tmp# ip link set wlan0 up
>>> SIOCSIFFLAGS: No such device
>>>
>>> lapp:/tmp# iwconfig
>>> lo no wireless extensions.
>>>
>>> eth1 no wireless extensions.
>>>
>>> wmaster0 no wireless extensions.
>>>
>>> wlan0 IEEE 802.11 ESSID:"planet_mars"
>>> Mode:Managed Frequency:2.412 GHz Access Point:
>>> Not-Associated
>>> Tx-Power=0 dBm
>>> Retry min limit:7 RTS thr:off Fragment thr=2352 B
>>> Encryption key:B200-A927-32DA-86E9-0DEF-EFF3-FB
>>> Link Quality:0 Signal level:0 Noise level:0
>>> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
>>> Tx excessive retries:0 Invalid misc:0 Missed beacon:0
>>>
>>>
>>> note that dmesg sais
>>> iwl4965: Detected Intel Wireless WiFi Link 4965AGN
>>> iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels
>>> phy1: Selected rate control algorithm 'iwl-4965-rs'
>>> ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>>> iwl4965: Radio disabled by HW RF Kill switch
>>
>> ___iwl4965: Radio disabled by HW RF Kill switch___ this would explain
>> the problem
>>
>> can you please enable the RF?
>> --
>> To unsubscribe from this list: send the line "unsubscribe
>> linux-wireless" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
> --
> To unsubscribe from this list: send the line "unsubscribe
> linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2008-04-05 14:39 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-05 11:12 compat-wireless iwl4965 on hp/compaq 2510p Bachman Kharazmi
2008-04-05 11:50 ` Johannes Berg
2008-04-05 11:52 ` Bachman Kharazmi
2008-04-05 11:54 ` Johannes Berg
2008-04-05 12:01 ` Bachman Kharazmi
2008-04-05 13:37 ` Tomas Winkler
2008-04-05 13:48 ` Bachman Kharazmi
2008-04-05 14:39 ` Bachman Kharazmi [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47F78F2F.8000605@tor.lindesign.se \
--to=bachman@tor.lindesign.se \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=tomasw@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.