From: aldebaran <aldebx@yahoo.fr>
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] cx23885 and Xc3028 frontend type (ATSC) is not compatible with requested tuning type (OFDM)
Date: Sat, 05 Apr 2008 16:53:27 +0200 [thread overview]
Message-ID: <47F79267.7060307@yahoo.fr> (raw)
[-- Attachment #1.1: Type: text/plain, Size: 3927 bytes --]
Dear linux-dvb developers,
I own an HP rebranded Hauppauge Express Card shipped with several HP
laptops.
I know you recently added support for this device, however I cannot
manage to make it work.
Specifically I cannot use the 'scan' utility to generate a channels.conf
file usable with me-tv, thus I cannot use the tuner.
I had the same outcomes either with v4l-dvb and patched cx23885 drivers.
Thank you for your support!
here is the output of this tool:
scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/fr-Paris
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 810000000 0 2 1 3 1 0 0
initial transponder 730000000 0 2 1 3 1 0 0
initial transponder 626000000 0 2 1 3 1 0 0
WARNING: frontend type (ATSC) is not compatible with requested
tuning type (OFDM)
WARNING: frontend type (ATSC) is not compatible with requested
tuning type (OFDM)
WARNING: frontend type (ATSC) is not compatible with requested
tuning type (OFDM)
ERROR: initial tuning failed
dumping lists (0 services)
Done.
here are my card specs:
HP Hauppauge WinTv 885
model 77001 rev d4c0 (Model 77xxx Analog/ATSC Hybrid, Xc3028)
tuner: Xceive xc3028 http://www.xceive.com/technology_XC3028.htm
audio tuner: stereo cx23885
decoder: cx23885 http://www.conexant.com/products/entry.jsp?id=393
The card seems correctly recognised, here is my dmesg output:
[ 34.715408] cx23885 driver version 0.0.1 loaded
[ 34.715478] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level,
low) -> IRQ 17
[ 34.715495] CORE cx23885[0]: subsystem: 0070:7717, board:
Hauppauge WinTV-HVR1500 [card=6,autodetected]
[ 34.717889] uvcvideo: disagrees about version of symbol video_devdata
[ 34.717891] uvcvideo: Unknown symbol video_devdata
[ 34.718209] uvcvideo: disagrees about version of symbol
video_unregister_device
[ 34.718211] uvcvideo: Unknown symbol video_unregister_device
[ 34.718311] uvcvideo: disagrees about version of symbol
video_device_alloc
[ 34.718313] uvcvideo: Unknown symbol video_device_alloc
[ 34.718380] uvcvideo: disagrees about version of symbol
video_register_device
[ 34.718382] uvcvideo: Unknown symbol video_register_device
[ 34.718581] uvcvideo: disagrees about version of symbol
video_device_release
[ 34.718582] uvcvideo: Unknown symbol video_device_release
[ 34.814851] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver
for Linux, 1.2.25
[ 34.814854] iwl4965: Copyright(c) 2003-2007 Intel Corporation
[ 34.826010] cx23885[0]: i2c bus 0 registered
[ 34.826027] cx23885[0]: i2c bus 1 registered
[ 34.826041] cx23885[0]: i2c bus 2 registered
[ 34.853553] tveeprom 0-0050: Hauppauge model 77001, rev D4C0,
serial #68766589
[ 34.853556] tveeprom 0-0050: MAC address is 00-0D-FE-23-A3-DB
[ 34.853558] tveeprom 0-0050: tuner model is Xceive XC3028 (idx
120, type 71)
[ 34.853561] tveeprom 0-0050: TV standards NTSC(M) ATSC/DVB
Digital (eeprom 0x88)
[ 34.853563] tveeprom 0-0050: audio processor is CX23885 (idx 39)
[ 34.853565] tveeprom 0-0050: decoder processor is CX23885 (idx 33)
[ 34.853567] tveeprom 0-0050: has no radio, has no IR receiver,
has no IR transmitter
[ 34.853569] cx23885[0]: hauppauge eeprom: model=77001
[ 34.853571] cx23885[0]: cx23885 based dvb card
[ 34.980916] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
[ 34.980921] DVB: registering new adapter (cx23885[0])
[ 34.980924] DVB: registering frontend 0 (Samsung S5H1409 QAM/8VSB
Frontend)...
[ 34.981111] cx23885_dev_checkrevision() Hardware revision = 0xb0
[ 34.981120] cx23885[0]/0: found at 0000:04:00.0, rev: 2, irq: 17,
latency: 0, mmio: 0xbc000000
[ 34.981128] PCI: Setting latency timer of device 0000:04:00.0 to 64
[-- Attachment #1.2: Type: text/html, Size: 4641 bytes --]
[-- Attachment #2: Type: text/plain, Size: 150 bytes --]
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next reply other threads:[~2008-04-05 14:54 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-05 14:53 aldebaran [this message]
2008-04-05 15:02 ` [linux-dvb] cx23885 and Xc3028 frontend type (ATSC) is not compatible with requested tuning type (OFDM) Michael Krufky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47F79267.7060307@yahoo.fr \
--to=aldebx@yahoo.fr \
--cc=linux-dvb@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.