From: Plamen Petrov <plamen.petrov@fs.ru.acad.bg>
To: linux-kernel@vger.kernel.org
Subject: linux 2.6.25-rc8-00166-g6fdf5e6 BUG
Date: Mon, 07 Apr 2008 10:49:51 +0300 [thread overview]
Message-ID: <47F9D21F.4080804@fs.ru.acad.bg> (raw)
[-- Attachment #1: Type: text/plain, Size: 4470 bytes --]
Hi!
This morning, while closing KMail from the KDE desktop to
shutdown the machine, I got this:
[===snip===]
[145026.240307] general protection fault: 0000 [1] PREEMPT SMP
[145026.240313] CPU 0
[145026.240315] Modules linked in:
[145026.240318] Pid: 32546, comm: kmail Not tainted
2.6.25-rc8-00166-g6fdf5e6 #1
[145026.240320] RIP: 0010:[<ffffffff80275274>] [<ffffffff80275274>]
set_page_dirty+0x34/0x90
[145026.240327] RSP: 0018:ffff810004ba9d98 EFLAGS: 00010206
[145026.240328] RAX: 6b636f6c5f747369 RBX: ffff81000779cae0 RCX:
ffff8100010046e0
[145026.240330] RDX: ffffffff802c08d0 RSI: 8000000033d60067 RDI:
ffffe20000b56d00
[145026.240332] RBP: 000000000115c000 R08: 0000000000000006 R09:
0000000000000001
[145026.240334] R10: 0000000000000002 R11: 000000000000031b R12:
ffffe20000b56d00
[145026.240335] R13: 0000000001200000 R14: 0000000033d60067 R15:
0000000000000000
[145026.240338] FS: 0000000000000000(0000) GS:ffffffff80993000(0000)
knlGS:0000000000000000
[145026.240340] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[145026.240341] CR2: 00007f695e7aa3f0 CR3: 0000000000201000 CR4:
00000000000006e0
[145026.240343] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[145026.240345] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[145026.240347] Process kmail (pid: 32546, threadinfo ffff810004ba8000,
task ffff81002137a000)
[145026.240348] Stack: 0000000001155000 ffff81000779cae0
000000000115c000 ffffffff8027e271
[145026.240353] 0000000000000000 0000000001574fff 0000000000000000
ffff810004ba9ea8
[145026.240357] ffffffffffffffff 0000000000000000 ffff81003af86bd0
ffff810004ba9eb0
[145026.240360] Call Trace:
[145026.240364] [<ffffffff8027e271>] ? unmap_vmas+0x611/0x800
[145026.240367] [<ffffffff8028252a>] ? exit_mmap+0x8a/0x130
[145026.240370] [<ffffffff80236957>] ? mmput+0x57/0xe0
[145026.240373] [<ffffffff8023cc8a>] ? do_exit+0x19a/0x7e0
[145026.240377] [<ffffffff807079fb>] ? lockdep_sys_exit_thunk+0x35/0x67
[145026.240381] [<ffffffff803f6281>] ? __up_read+0x21/0xb0
[145026.240383] [<ffffffff8023d303>] ? do_group_exit+0x33/0xa0
[145026.240386] [<ffffffff8020b56b>] ? system_call_after_swapgs+0x7b/0x80
[145026.240387]
[145026.240388]
[145026.240389] Code: 48 8b 47 18 66 85 d2 78 70 a8 01 75 50 48 85 c0 74
4b 48 8b 80 b8 00 00 00 48 c7 c2 d0 08 2c 80 48 8b 40 20 48 85 c0 48 0f
44 c2 <ff> d0 85 c0 89 c5 74 21 65 48 8b 34 25 00 00 00 00 48 81 c6 d0
[145026.240416] RIP [<ffffffff80275274>] set_page_dirty+0x34/0x90
[145026.240419] RSP <ffff810004ba9d98>
[145026.240423] ---[ end trace 6b50f2d712edcd7a ]---
[145026.240424] Fixing recursive fault but reboot is needed!
[145026.240426] BUG: scheduling while atomic: kmail/32546/0x00000003
[145026.240428] INFO: lockdep is turned off.
[145026.240430] Pid: 32546, comm: kmail Tainted: G D
2.6.25-rc8-00166-g6fdf5e6 #1
[145026.240431]
[145026.240432] Call Trace:
[145026.240435] [<ffffffff80705a26>] thread_return+0x34c/0x576
[145026.240437] [<ffffffff80239469>] release_console_sem+0x49/0x200
[145026.240439] [<ffffffff80239e5e>] printk+0x4e/0x60
[145026.240441] [<ffffffff8023d29e>] do_exit+0x7ae/0x7e0
[145026.240444] [<ffffffff8022e223>] __wake_up+0x43/0x70
[145026.240446] [<ffffffff8020c8e7>] oops_end+0x87/0x90
[145026.240448] [<ffffffff8070884d>] error_exit+0x0/0x9a
[145026.240452] [<ffffffff802c08d0>] __set_page_dirty_buffers+0x0/0xc0
[145026.240454] [<ffffffff80275274>] set_page_dirty+0x34/0x90
[145026.240457] [<ffffffff8027b6f8>] __dec_zone_state+0x18/0x80
[145026.240459] [<ffffffff8027e271>] unmap_vmas+0x611/0x800
[145026.240461] [<ffffffff8028252a>] exit_mmap+0x8a/0x130
[145026.240463] [<ffffffff80236957>] mmput+0x57/0xe0
[145026.240466] [<ffffffff8023cc8a>] do_exit+0x19a/0x7e0
[145026.240468] [<ffffffff807079fb>] lockdep_sys_exit_thunk+0x35/0x67
[145026.240470] [<ffffffff803f6281>] __up_read+0x21/0xb0
[145026.240473] [<ffffffff8023d303>] do_group_exit+0x33/0xa0
[145026.240475] [<ffffffff8020b56b>] system_call_after_swapgs+0x7b/0x80
[145026.240476]
[===end-snip===]
Should I open a bugreport at bugzilla.kernel.org with this,
or should I try latest git tree?
Kernel config (gzipped) used, full dmesg output plus
lspci -vv (as root) attached.
P.S. I'm not subscribed to linux-kernel@vger.kernel.org.
--
Plamen Petrov, network & system administrator
Filial - Silistra
RU "Angel Kantchev"
http://fs.ru.acad.bg/
--------------------------------
this message is UTF8 encoded
[-- Attachment #2: config.gz --]
[-- Type: application/octet-stream, Size: 11344 bytes --]
[-- Attachment #3: linux-2.6.25-rc8-bug.txt --]
[-- Type: text/plain, Size: 47877 bytes --]
[ 0.000000] Linux version 2.6.25-rc8-00166-g6fdf5e6 (carpo@nomad64) (gcc version 4.1.2) #1 SMP PREEMPT Sat Apr 5 01:32:17 EEST 2008
[ 0.000000] Command line: ro root=/dev/sda2
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
[ 0.000000] BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[ 0.000000] Entering add_active_range(0, 256, 262064) 1 entries of 256 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F7E10, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 3FFB0000, 0038 (r1 A M I OEMRSDT 7000725 MSFT 97)
[ 0.000000] ACPI: FACP 3FFB0200, 0084 (r2 A M I OEMFACP 7000725 MSFT 97)
[ 0.000000] ACPI: DSDT 3FFB0450, 4AED (r1 4CDVT 4CDVT191 191 INTL 2002026)
[ 0.000000] ACPI: FACS 3FFC0000, 0040
[ 0.000000] ACPI: APIC 3FFB0390, 0078 (r1 A M I OEMAPIC 7000725 MSFT 97)
[ 0.000000] ACPI: MCFG 3FFB0410, 003C (r1 A M I OEMMCFG 7000725 MSFT 97)
[ 0.000000] ACPI: OEMB 3FFC0040, 0051 (r1 A M I AMI_OEM 7000725 MSFT 97)
[ 0.000000] ACPI: HPET 3FFB4F40, 0038 (r1 A M I OEMHPET 7000725 MSFT 97)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[ 0.000000] Entering add_active_range(0, 256, 262064) 1 entries of 256 used
[ 0.000000] early res: 0 [0-fff] BIOS data page
[ 0.000000] early res: 1 [6000-7fff] SMP_TRAMPOLINE
[ 0.000000] early res: 2 [200000-b9b71f] TEXT DATA BSS
[ 0.000000] early res: 3 [9fc00-a0bff] EBDA
[ 0.000000] early res: 4 [8000-afff] PGTABLE
[ 0.000000] [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
[ 0.000000] [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
[ 0.000000] [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
[ 0.000000] [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
[ 0.000000] [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
[ 0.000000] [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
[ 0.000000] [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 262064
[ 0.000000] On node 0 totalpages: 261967
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 2468 pages reserved
[ 0.000000] DMA zone: 1475 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3526 pages used for memmap
[ 0.000000] DMA32 zone: 254442 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 3, address 0xfecc0000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x11068201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bee00000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 43012 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 255917
[ 0.000000] Kernel command line: ro root=/dev/sda2
[ 0.000000] Initializing CPU#0
[ 0.000000] Preemptible RCU implementation.
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000002] time.c: Detected 2419.823 MHz processor.
[ 0.002136] Console: colour VGA+ 80x25
[ 0.002140] console [tty0] enabled
[ 0.010000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.010000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.010000] ... MAX_LOCK_DEPTH: 48
[ 0.010000] ... MAX_LOCKDEP_KEYS: 2048
[ 0.010000] ... CLASSHASH_SIZE: 1024
[ 0.010000] ... MAX_LOCKDEP_ENTRIES: 8192
[ 0.010000] ... MAX_LOCKDEP_CHAINS: 16384
[ 0.010000] ... CHAINHASH_SIZE: 8192
[ 0.010000] memory used by lock dependency info: 1648 kB
[ 0.010000] per task-struct memory footprint: 2688 bytes
[ 0.010000] ------------------------
[ 0.010000] | Locking API testsuite:
[ 0.010000] ----------------------------------------------------------------------------
[ 0.010000] | spin |wlock |rlock |mutex | wsem | rsem |
[ 0.010000] --------------------------------------------------------------------------
[ 0.010000] A-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.010000] A-B-B-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.010000] A-B-B-C-C-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.010000] A-B-C-A-B-C deadlock:failed|failed| ok |failed|failed|failed|
[ 0.010000] A-B-B-C-C-D-D-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.010000] A-B-C-D-B-D-D-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.010000] A-B-C-D-B-C-D-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.010000] double unlock: ok | ok |failed| ok |failed|failed|
[ 0.010000] initialize held:failed|failed|failed|failed|failed|failed|
[ 0.010000] bad unlock order: ok | ok | ok | ok | ok | ok |
[ 0.010000] --------------------------------------------------------------------------
[ 0.010000] recursive read-lock: | ok | |failed|
[ 0.010000] recursive read-lock #2: | ok | |failed|
[ 0.010000] mixed read-write-lock: |failed| |failed|
[ 0.010000] mixed write-read-lock: |failed| |failed|
[ 0.010000] --------------------------------------------------------------------------
[ 0.010000] hard-irqs-on + irq-safe-A/12:failed|failed| ok |
[ 0.010000] soft-irqs-on + irq-safe-A/12:failed|failed| ok |
[ 0.010000] hard-irqs-on + irq-safe-A/21:failed|failed| ok |
[ 0.010000] soft-irqs-on + irq-safe-A/21:failed|failed| ok |
[ 0.010000] sirq-safe-A => hirqs-on/12:failed|failed| ok |
[ 0.010000] sirq-safe-A => hirqs-on/21:failed|failed| ok |
[ 0.010000] hard-safe-A + irqs-on/12:failed|failed| ok |
[ 0.010000] soft-safe-A + irqs-on/12:failed|failed| ok |
[ 0.010000] hard-safe-A + irqs-on/21:failed|failed| ok |
[ 0.010000] soft-safe-A + irqs-on/21:failed|failed| ok |
[ 0.010000] hard-safe-A + unsafe-B #1/123:failed|failed| ok |
[ 0.010000] soft-safe-A + unsafe-B #1/123:failed|failed| ok |
[ 0.010000] hard-safe-A + unsafe-B #1/132:failed|failed| ok |
[ 0.010000] soft-safe-A + unsafe-B #1/132:failed|failed| ok |
[ 0.010000] hard-safe-A + unsafe-B #1/213:failed|failed| ok |
[ 0.010000] soft-safe-A + unsafe-B #1/213:failed|failed| ok |
[ 0.010000] hard-safe-A + unsafe-B #1/231:failed|failed| ok |
[ 0.010000] soft-safe-A + unsafe-B #1/231:failed|failed| ok |
[ 0.010000] hard-safe-A + unsafe-B #1/312:failed|failed| ok |
[ 0.010000] soft-safe-A + unsafe-B #1/312:failed|failed| ok |
[ 0.010000] hard-safe-A + unsafe-B #1/321:failed|failed| ok |
[ 0.010000] soft-safe-A + unsafe-B #1/321:failed|failed| ok |
[ 0.010000] hard-safe-A + unsafe-B #2/123:failed|failed| ok |
[ 0.010000] soft-safe-A + unsafe-B #2/123:failed|failed| ok |
[ 0.010000] hard-safe-A + unsafe-B #2/132:failed|failed| ok |
[ 0.010000] soft-safe-A + unsafe-B #2/132:failed|failed| ok |
[ 0.010000] hard-safe-A + unsafe-B #2/213:failed|failed| ok |
[ 0.010000] soft-safe-A + unsafe-B #2/213:failed|failed| ok |
[ 0.010000] hard-safe-A + unsafe-B #2/231:failed|failed| ok |
[ 0.010000] soft-safe-A + unsafe-B #2/231:failed|failed| ok |
[ 0.010000] hard-safe-A + unsafe-B #2/312:failed|failed| ok |
[ 0.010000] soft-safe-A + unsafe-B #2/312:failed|failed| ok |
[ 0.010000] hard-safe-A + unsafe-B #2/321:failed|failed| ok |
[ 0.010000] soft-safe-A + unsafe-B #2/321:failed|failed| ok |
[ 0.010000] hard-irq lock-inversion/123:failed|failed| ok |
[ 0.010000] soft-irq lock-inversion/123:failed|failed| ok |
[ 0.010000] hard-irq lock-inversion/132:failed|failed| ok |
[ 0.010000] soft-irq lock-inversion/132:failed|failed| ok |
[ 0.010000] hard-irq lock-inversion/213:failed|failed| ok |
[ 0.010000] soft-irq lock-inversion/213:failed|failed| ok |
[ 0.010000] hard-irq lock-inversion/231:failed|failed| ok |
[ 0.010000] soft-irq lock-inversion/231:failed|failed| ok |
[ 0.010000] hard-irq lock-inversion/312:failed|failed| ok |
[ 0.010000] soft-irq lock-inversion/312:failed|failed| ok |
[ 0.010000] hard-irq lock-inversion/321:failed|failed| ok |
[ 0.010000] soft-irq lock-inversion/321:failed|failed| ok |
[ 0.010000] hard-irq read-recursion/123: ok |
[ 0.010000] soft-irq read-recursion/123: ok |
[ 0.010000] hard-irq read-recursion/132: ok |
[ 0.010000] soft-irq read-recursion/132: ok |
[ 0.010000] hard-irq read-recursion/213: ok |
[ 0.010000] soft-irq read-recursion/213: ok |
[ 0.010000] hard-irq read-recursion/231: ok |
[ 0.010000] soft-irq read-recursion/231: ok |
[ 0.010000] hard-irq read-recursion/312: ok |
[ 0.010000] soft-irq read-recursion/312: ok |
[ 0.010000] hard-irq read-recursion/321: ok |
[ 0.010000] soft-irq read-recursion/321: ok |
[ 0.010000] --------------------------------------------------------
[ 0.010000] 142 out of 218 testcases failed, as expected. |
[ 0.010000] ----------------------------------------------------
[ 0.010000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.010000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.010000] Checking aperture...
[ 0.010000] Memory: 1021116k/1048256k available (5164k kernel code, 26112k reserved, 2589k data, 292k init)
[ 0.010000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.010000] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 0.010000] hpet clockevent registered
[ 0.150002] Calibrating delay using timer specific routine.. 4842.12 BogoMIPS (lpj=24210644)
[ 0.150999] Security Framework initialized
[ 0.151130] Capability LSM initialized
[ 0.151260] Mount-cache hash table entries: 256
[ 0.151542] Initializing cgroup subsys cpuacct
[ 0.151678] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.151849] CPU: L2 cache: 2048K
[ 0.151969] CPU: Physical Processor ID: 0
[ 0.152092] CPU: Processor Core ID: 0
[ 0.152220] CPU0: Thermal monitoring enabled (TM1)
[ 0.152348] using mwait in idle threads.
[ 0.152478] ACPI: Core revision 20070126
[ 0.263084] Using local APIC timer interrupts.
[ 0.270001] APIC timer calibration result 16804321
[ 0.270002] Detected 16.804 MHz APIC timer.
[ 0.270252] lockdep: fixing up alternatives.
[ 0.270397] Booting processor 1/2 APIC 0x1
[ 0.010000] Initializing CPU#1
[ 0.010000] Calibrating delay using timer specific routine.. 4839.69 BogoMIPS (lpj=24198487)
[ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.010000] CPU: L2 cache: 2048K
[ 0.010000] CPU: Physical Processor ID: 0
[ 0.010000] CPU: Processor Core ID: 1
[ 0.010000] CPU1: Thermal monitoring enabled (TM1)
[ 0.010000] Intel(R) Core(TM)2 CPU 4300 @ 1.80GHz stepping 02
[ 0.430341] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.440027] Brought up 2 CPUs
[ 0.440198] CPU0 attaching sched-domain:
[ 0.440200] domain 0: span 3
[ 0.440202] groups: 1 2
[ 0.440205] CPU1 attaching sched-domain:
[ 0.440206] domain 0: span 3
[ 0.440208] groups: 2 1
[ 0.440452] net_namespace: 1120 bytes
[ 0.440718] NET: Registered protocol family 16
[ 0.440958] No dock devices found.
[ 0.441165] ACPI: bus type pci registered
[ 0.441305] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[ 0.441442] PCI: Not using MMCONFIG.
[ 0.441563] PCI: Using configuration type 1
[ 0.445630] ACPI: EC: Look up EC in DSDT
[ 0.451517] ACPI: Interpreter enabled
[ 0.451641] ACPI: (supports S0 S5)
[ 0.451850] ACPI: Using IOAPIC for interrupt routing
[ 0.458200] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.459862] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.460095] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
[ 0.460191] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.471414] ACPI: PCI Root Bridge [PCI1] (0000:80)
[ 0.471629] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
[ 0.471818] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.472570] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.473798] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.474548] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.475297] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.476198] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.477098] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.477998] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.478806] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.478972] pnp: PnP ACPI init
[ 0.479096] ACPI: bus type pnp registered
[ 0.479395] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.479463] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.479546] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.479596] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.479652] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.480626] 00:05: calling quirk 0xffffffff80445e10: quirk_system_pci_resources+0x0/0x1b0()
[ 0.480684] pnp 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.480846] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.480925] 00:07: calling quirk 0xffffffff80445e10: quirk_system_pci_resources+0x0/0x1b0()
[ 0.480976] pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.481065] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.481187] pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.481446] 00:0a: calling quirk 0xffffffff80445e10: quirk_system_pci_resources+0x0/0x1b0()
[ 0.481502] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.481748] 00:0b: calling quirk 0xffffffff80445e10: quirk_system_pci_resources+0x0/0x1b0()
[ 0.481802] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.481959] pnp 00:0c: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.482241] pnp: PnP ACPI: found 13 devices
[ 0.482366] ACPI: ACPI bus type pnp unregistered
[ 0.482730] SCSI subsystem initialized
[ 0.482928] libata version 3.00 loaded.
[ 0.483105] usbcore: registered new interface driver usbfs
[ 0.483302] usbcore: registered new interface driver hub
[ 0.483481] usbcore: registered new device driver usb
[ 0.484021] PCI: Using ACPI for IRQ routing
[ 0.484147] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.550012] Bluetooth: Core ver 2.11
[ 0.550288] NET: Registered protocol family 31
[ 0.550415] Bluetooth: HCI device and connection manager initialized
[ 0.550553] Bluetooth: HCI socket layer initialized
[ 0.670037] DMAR:parse DMAR table failure.
[ 0.670169] PCI-GART: No AMD northbridge found.
[ 0.670300] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.670601] hpet0: 3 32-bit timers, 14318180 Hz
[ 0.671756] ACPI: RTC can wake from S4
[ 0.680011] Switched to high resolution mode on CPU 0
[ 0.240015] Switched to high resolution mode on CPU 1
[ 0.790013] pnp: the driver 'system' has been registered
[ 0.790024] system 00:05: ioport range 0x295-0x296 has been reserved
[ 0.790161] system 00:05: ioport range 0x3e0-0x3e7 has been reserved
[ 0.790298] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[ 0.790435] system 00:05: ioport range 0x800-0x87f has been reserved
[ 0.790571] system 00:05: ioport range 0x400-0x41f has been reserved
[ 0.790709] system 00:05: iomem range 0xfffffff0-0xffffffff could not be reserved
[ 0.790911] system 00:05: iomem range 0xffb80000-0xffbfffff could not be reserved
[ 0.791113] system 00:05: driver attached
[ 0.791118] system 00:07: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.791259] system 00:07: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.791461] system 00:07: driver attached
[ 0.791467] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.791607] system 00:0a: driver attached
[ 0.791612] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
[ 0.791750] system 00:0b: iomem range 0xc0000-0xcffff has been reserved
[ 0.791889] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved
[ 0.792029] system 00:0b: iomem range 0x100000-0x3fffffff could not be reserved
[ 0.792230] system 00:0b: iomem range 0xfff80000-0xffffffff could not be reserved
[ 0.792431] system 00:0b: driver attached
[ 0.792943] PCI: Bridge: 0000:00:01.0
[ 0.793065] IO window: disabled.
[ 0.793188] MEM window: 0xfa800000-0xfa8fffff
[ 0.793317] PREFETCH window: disabled.
[ 0.793444] PCI: Bridge: 0000:00:02.0
[ 0.793567] IO window: c000-cfff
[ 0.793690] MEM window: 0xfa900000-0xfe9fffff
[ 0.793819] PREFETCH window: 0x00000000aff00000-0x00000000cfefffff
[ 0.793976] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.793993] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27
[ 0.794241] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 0.794249] NET: Registered protocol family 2
[ 1.150048] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 1.150410] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 1.151534] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
[ 1.154199] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.154341] TCP reno registered
[ 0.842374] NTFS driver 2.1.29 [Flags: R/O].
[ 0.842643] fuse init (API version 7.9)
[ 0.843001] SGI XFS with ACLs, large block/inode numbers, no debug enabled
[ 0.844098] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.844301] io scheduler noop registered
[ 0.844425] io scheduler deadline registered (default)
[ 0.844566] PCI: VIA PCI bridge detected. Disabling DAC.
[ 0.844796] pci 0000:02:00.0: Boot video device
[ 0.844893] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 0.844927] assign_interrupt_mode Found MSI capability
[ 0.845108] Allocate Port Service[0000:00:02.0:pcie00]
[ 0.845145] Allocate Port Service[0000:00:02.0:pcie02]
[ 0.845351] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.845556] ACPI: Power Button (FF) [PWRF]
[ 0.845778] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.845987] ACPI: Power Button (CM) [PWRB]
[ 0.846598] ACPI: ACPI0007:00 is registered as cooling_device0
[ 0.846994] ACPI: ACPI0007:01 is registered as cooling_device1
[ 1.055487] Real Time Clock Driver v1.12ac
[ 1.055828] hpet_resources: 0xfed00000 is busy
[ 1.055909] Linux agpgart interface v0.103
[ 1.056049] agpgart: Detected VIA PT880 Ultra chipset
[ 1.065332] agpgart: AGP aperture is 256M @ 0xd0000000
[ 1.065531] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
[ 1.065740] Hangcheck: Using get_cycles().
[ 1.066226] loop: module loaded
[ 1.066423] Ethernet Channel Bonding Driver: v3.2.5 (March 21, 2008)
[ 1.066560] bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
[ 1.067132] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 1.067292] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 1.067768] eth0: VIA Rhine II at 0xfebffc00, 00:19:66:12:22:a6, IRQ 23.
[ 1.068613] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
[ 1.069744] tun: Universal TUN/TAP device driver, 1.6
[ 1.069874] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.070113] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 1.070363] PCI: Disallowing DAC for device 0000:00:0b.0
[ 1.076607] phy0 -> rt61pci_validate_eeprom: EEPROM recovery - NIC: 0xff80
[ 1.076609] phy0 -> rt61pci_validate_eeprom: EEPROM recovery - RSSI OFFSET BG: 0x0000
[ 1.076611] phy0 -> rt61pci_validate_eeprom: EEPROM recovery - RSSI OFFSET BG: 0x0000
[ 1.076615] phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 0301, rf: 0003, rev: 0002561c.
[ 1.077207] phy0: Selected rate control algorithm 'simple'
[ 1.077676] Driver 'sd' needs updating - please use bus_type methods
[ 1.077844] Driver 'sr' needs updating - please use bus_type methods
[ 1.078144] sata_via 0000:00:0f.0: version 2.3
[ 1.078162] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 21
[ 1.078429] sata_via 0000:00:0f.0: routed to hard irq line 7
[ 1.078630] scsi0 : sata_via
[ 1.078813] scsi1 : sata_via
[ 1.080225] ata1: SATA max UDMA/133 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 21
[ 1.080366] ata2: SATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 21
[ 1.610014] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.638956] ata1.00: ATA-8: WDC WD5000AAKS-07YGA0, 12.01C02, max UDMA/133
[ 1.639095] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.651041] ata1.00: configured for UDMA/133
[ 1.670012] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 1.180012] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
[ 1.180012] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 1.180012] sd 0:0:0:0: [sda] Write Protect is off
[ 1.180012] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.180012] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.180012] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 1.180012] sd 0:0:0:0: [sda] Write Protect is off
[ 1.180012] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.180012] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.180012] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 >
[ 1.749378] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.749584] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.749854] pata_via 0000:00:0f.1: version 0.3.3
[ 1.749950] scsi2 : pata_via
[ 1.750073] scsi3 : pata_via
[ 1.752462] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 1.752603] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 1.400368] ata3.00: ATAPI: HL-DT-ST DVDRAM GSA-4163B, A105, max UDMA/33
[ 1.400514] ata3.01: ATAPI: HL-DT-ST GCE-8523B, 1.04, max UDMA/33
[ 1.430239] ata3.00: configured for UDMA/33
[ 1.460238] ata3.01: configured for UDMA/33
[ 1.880007] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4163B A105 PQ: 0 ANSI: 5
[ 1.886387] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.886590] Uniform CD-ROM driver Revision: 3.20
[ 1.886806] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.886883] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 1.887295] scsi 2:0:1:0: CD-ROM HL-DT-ST CD-RW GCE-8523B 1.04 PQ: 0 ANSI: 5
[ 1.890345] sr1: scsi3-mmc drive: 40x/52x writer cd/rw xa/form2 cdda tray
[ 1.890540] sr 2:0:1:0: Attached scsi CD-ROM sr1
[ 1.890614] sr 2:0:1:0: Attached scsi generic sg2 type 5
[ 1.890980] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
[ 1.891235] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 1.891466] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 1.891697] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfebff800
[ 1.910011] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 1.910373] usb usb1: configuration #1 chosen from 1 choice
[ 1.910548] hub 1-0:1.0: USB hub found
[ 1.910675] hub 1-0:1.0: 8 ports detected
[ 2.020108] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.020251] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.020452] usb usb1: Product: EHCI Host Controller
[ 2.020580] usb usb1: Manufacturer: Linux 2.6.25-rc8-00166-g6fdf5e6 ehci_hcd
[ 2.020720] usb usb1: SerialNumber: 0000:00:10.4
[ 2.020885] USB Universal Host Controller Interface driver v3.0
[ 2.021052] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 2.021301] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 2.021521] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 2.021745] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000e000
[ 2.022008] usb usb2: configuration #1 chosen from 1 choice
[ 2.022181] hub 2-0:1.0: USB hub found
[ 2.022307] hub 2-0:1.0: 2 ports detected
[ 2.130110] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.130253] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.130454] usb usb2: Product: UHCI Host Controller
[ 2.130582] usb usb2: Manufacturer: Linux 2.6.25-rc8-00166-g6fdf5e6 uhci_hcd
[ 2.130722] usb usb2: SerialNumber: 0000:00:10.0
[ 2.130873] ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 22 (level, low) -> IRQ 22
[ 2.131121] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 2.131341] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 2.131563] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000e080
[ 2.131830] usb usb3: configuration #1 chosen from 1 choice
[ 2.132003] hub 3-0:1.0: USB hub found
[ 2.132129] hub 3-0:1.0: 2 ports detected
[ 2.230111] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.230250] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.230450] usb usb3: Product: UHCI Host Controller
[ 2.230579] usb usb3: Manufacturer: Linux 2.6.25-rc8-00166-g6fdf5e6 uhci_hcd
[ 2.230719] usb usb3: SerialNumber: 0000:00:10.1
[ 2.230867] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 21
[ 2.231115] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 2.231330] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 2.231548] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e400
[ 2.231807] usb usb4: configuration #1 chosen from 1 choice
[ 2.231979] hub 4-0:1.0: USB hub found
[ 2.232105] hub 4-0:1.0: 2 ports detected
[ 2.340115] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.340254] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.340454] usb usb4: Product: UHCI Host Controller
[ 2.340583] usb usb4: Manufacturer: Linux 2.6.25-rc8-00166-g6fdf5e6 uhci_hcd
[ 2.340723] usb usb4: SerialNumber: 0000:00:10.2
[ 2.340871] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 23
[ 2.341120] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 2.341342] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 2.341563] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000e480
[ 2.341825] usb usb5: configuration #1 chosen from 1 choice
[ 2.341998] hub 5-0:1.0: USB hub found
[ 2.342124] hub 5-0:1.0: 2 ports detected
[ 2.440104] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.440243] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.440444] usb usb5: Product: UHCI Host Controller
[ 2.440572] usb usb5: Manufacturer: Linux 2.6.25-rc8-00166-g6fdf5e6 uhci_hcd
[ 2.440712] usb usb5: SerialNumber: 0000:00:10.3
[ 2.440885] Initializing USB Mass Storage driver...
[ 2.640007] usbcore: registered new interface driver usb-storage
[ 2.640007] USB Mass Storage support registered.
[ 2.640007] pnp: the driver 'i8042 kbd' has been registered
[ 2.640007] i8042 kbd 00:08: driver attached
[ 2.640007] pnp: the driver 'i8042 aux' has been registered
[ 2.640007] i8042 aux 00:09: driver attached
[ 2.640007] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 2.640007] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.640007] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.640007] mice: PS/2 mouse device common for all mice
[ 2.649592] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 2.724068] I2O subsystem v1.325
[ 2.724188] i2o: max drivers = 8
[ 2.724453] pnp: the driver 'rtc_cmos' has been registered
[ 2.724461] rtc_cmos 00:02: disabling not supported
[ 2.724465] rtc_cmos: probe of 00:02 failed with error -16
[ 2.724628] i2c /dev entries driver
[ 2.725101] Driver for 1-wire Dallas network protocol.
[ 2.725423] usbcore: registered new interface driver DS9490R
[ 2.725594] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko
[ 2.725819] w83627hf: Found W83697HF chip at 0x290
[ 2.870007] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[ 2.983363] coretemp coretemp.0: Using relative temperature scale!
[ 2.983583] coretemp coretemp.1: Using relative temperature scale!
[ 2.983888] WDT driver for the Winbond(TM) W83627HF/THF/HG Super I/O chip initialising.
[ 2.984120] w83627hf/thf/hg WDT: Watchdog already running. Resetting timeout to 60 sec
[ 2.984388] w83627hf/thf/hg WDT: initialized. timeout=60 sec (nowayout=0)
[ 2.984527] w83697hf/hg WDT: WDT driver for W83697HF/HG initializing
[ 2.984663] w83697hf/hg WDT: I/O address 0x2e already in use
[ 2.984796] w83697hf/hg WDT: No W83697HF/HG could be found
[ 2.984928] SoftDog: cannot register miscdev on minor=130 (err=-16)
[ 2.985064] Bluetooth: HCI USB driver ver 2.9
[ 2.985228] usbcore: registered new interface driver hci_usb
[ 2.985362] Bluetooth: HCI UART driver ver 2.2
[ 2.985490] Bluetooth: HCI H4 protocol initialized
[ 2.985617] Bluetooth: HCI BCSP protocol initialized
[ 2.985746] Bluetooth: HCILL protocol initialized
[ 2.985873] Bluetooth: Broadcom Blutonium firmware driver ver 1.1
[ 2.986046] usbcore: registered new interface driver bcm203x
[ 2.986180] Bluetooth: Digianswer Bluetooth USB driver ver 0.9
[ 2.986350] usbcore: registered new interface driver bpa10x
[ 2.986483] EDAC MC: Ver: 2.1.0 Apr 5 2008
[ 2.986761] cpuidle: using governor ladder
[ 2.986886] cpuidle: using governor menu
[ 2.987081] usbcore: registered new interface driver usbhid
[ 2.987214] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 2.987401] Advanced Linux Sound Architecture Driver Version 1.0.16rc2 (Thu Jan 31 16:40:16 2008 UTC).
[ 2.987950] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 3.002100] ALSA device list:
[ 3.002221] #0: SB Live 5.1 (rev.8, serial:0x80641102) at 0xef00, irq 16
[ 3.002419] oprofile: using NMI interrupt.
[ 3.002667] GACT probability on
[ 3.002786] Mirror/redirect action on
[ 3.002908] Simple TC action Loaded
[ 3.003314] netem: version 1.2
[ 3.003433] u32 classifier
[ 3.003549] Performance counters on
[ 3.003671] input device check on
[ 3.003793] Actions configured
[ 3.003917] Netfilter messages via NETLINK v0.30.
[ 3.004483] IPv4 over IPv4 tunneling driver
[ 3.004889] GRE over IPv4 tunneling driver
[ 3.005346] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.005495] arp_tables: (C) 2002 David S. Miller
[ 3.005636] TCP bic registered
[ 3.005755] TCP cubic registered
[ 3.005874] TCP westwood registered
[ 3.005994] TCP highspeed registered
[ 3.006116] TCP hybla registered
[ 3.006235] TCP htcp registered
[ 3.006353] TCP vegas registered
[ 3.006473] TCP scalable registered
[ 3.006593] Initializing XFRM netlink socket
[ 3.006791] NET: Registered protocol family 1
[ 3.007013] NET: Registered protocol family 10
[ 3.007625] lo: Disabled Privacy Extensions
[ 3.009888] tunl0: Disabled Privacy Extensions
[ 3.010713] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 3.010862] IPv6 over IPv4 tunneling driver
[ 3.011403] sit0: Disabled Privacy Extensions
[ 3.012688] NET: Registered protocol family 17
[ 3.012818] NET: Registered protocol family 15
[ 3.012950] Bluetooth: L2CAP ver 2.9
[ 3.013792] Bluetooth: L2CAP socket layer initialized
[ 3.013923] Bluetooth: SCO (Voice Link) ver 0.5
[ 3.014049] Bluetooth: SCO socket layer initialized
[ 3.014211] Bluetooth: RFCOMM socket layer initialized
[ 3.014343] Bluetooth: RFCOMM ver 1.8
[ 3.014465] Bluetooth: BNEP (Ethernet Emulation) ver 1.2
[ 3.014596] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 3.016147] SCTP: Hash tables configured (established 18724 bind 18724)
[ 3.220119] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 3.220258] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 3.220465] ieee80211_crypt: registered algorithm 'NULL'
[ 3.220467] ieee80211_crypt: registered algorithm 'WEP'
[ 3.220468] ieee80211_crypt: registered algorithm 'CCMP'
[ 3.220470] ieee80211_crypt: registered algorithm 'TKIP'
[ 3.254852] UDF-fs: No VRS found
[ 3.270199] XFS mounting filesystem sda2
[ 3.328057] Ending clean XFS mount for filesystem: sda2
[ 3.328089] VFS: Mounted root (xfs filesystem) readonly.
[ 3.328234] Freeing unused kernel memory: 292k freed
[ 3.328472] Write protecting the kernel read-only data: 2012k
[ 5.344802] Adding 2008084k swap on /dev/sda5. Priority:-1 extents:1 across:2008084k
[ 6.540334] XFS mounting filesystem sda1
[ 6.560007] Ending clean XFS mount for filesystem: sda1
[ 7.022503] XFS mounting filesystem sda6
[ 7.070007] Ending clean XFS mount for filesystem: sda6
[ 8.231141] XFS mounting filesystem sda11
[ 8.290008] Ending clean XFS mount for filesystem: sda11
[ 9.552123] phy0 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt2561s.bin'.
[ 8.008777] phy0 -> rt2x00lib_request_firmware: Info - Firmware detected - version: 0.8.
[ 8.050051] phy0 -> rt61pci_init_bbp: Debug - Start initialization from EEPROM...
[ 8.050055] phy0 -> rt61pci_init_bbp: Debug - ...End initialization from EEPROM.
[ 8.070103] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8.070811] eth0: link down
[ 8.070913] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.131065] phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 0 - CWmin: 4, CWmax: 10, Aifs: 2.
[ 10.131071] phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 1 - CWmin: 4, CWmax: 10, Aifs: 2.
[ 10.131074] phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 2 - CWmin: 4, CWmax: 10, Aifs: 2.
[ 10.131076] phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 3 - CWmin: 4, CWmax: 10, Aifs: 2.
[ 10.131125] phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 4 - CWmin: 4, CWmax: 10, Aifs: 2.
[ 10.133516] phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 0 - CWmin: 4, CWmax: 10, Aifs: 2.
[ 10.133521] phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 1 - CWmin: 4, CWmax: 10, Aifs: 2.
[ 10.133524] phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 2 - CWmin: 4, CWmax: 10, Aifs: 2.
[ 10.133560] phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 3 - CWmin: 4, CWmax: 10, Aifs: 2.
[ 10.133563] phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 4 - CWmin: 4, CWmax: 10, Aifs: 2.
[ 11.060027] wlan0: Initial auth_alg=0
[ 11.060035] wlan0: authenticate with AP 00:1d:7e:e3:82:84
[ 12.703932] wlan0: RX authentication from 00:1d:7e:e3:82:84 (alg=0 transaction=2 status=0)
[ 12.703936] wlan0: authenticated
[ 12.703938] wlan0: associate with AP 00:1d:7e:e3:82:84
[ 12.706536] wlan0: RX AssocResp from 00:1d:7e:e3:82:84 (capab=0x401 status=0 aid=2)
[ 12.706539] wlan0: associated
[ 12.706560] wlan0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 burst=0
[ 12.706562] phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 2 - CWmin: 4, CWmax: 10, Aifs: 3.
[ 12.706565] wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
[ 12.706566] phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 3 - CWmin: 4, CWmax: 10, Aifs: 7.
[ 12.706569] wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
[ 12.706571] phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 1 - CWmin: 3, CWmax: 4, Aifs: 2.
[ 12.706573] wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
[ 12.706575] phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 0 - CWmin: 2, CWmax: 3, Aifs: 2.
[ 12.706714] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 21.460012] wlan0: no IPv6 routers present
[ 529.059933] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 529.623388] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 638.319116] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 642.726665] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 784.657477] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 1250.997877] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 1436.436535] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 1443.114019] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 3897.809274] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 3898.300801] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 4227.856143] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 4228.183831] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 4302.335325] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 4306.349423] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 4758.349027] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 4762.415062] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 4864.820295] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 4868.732489] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 4946.775772] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 6499.435386] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 6797.994598] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 6803.299427] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 6816.960161] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 6853.017115] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[28585.709062] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[55381.364441] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[63637.196606] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[67239.003480] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[94867.264304] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[94867.264477] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[94878.160360] eth0: no IPv6 routers present
[95252.009675] eth0: link down
[95259.029973] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[95289.992603] eth0: link down
[102367.866055] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[102664.055026] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[103599.021786] ISO 9660 Extensions: Microsoft Joliet Level 3
[103599.112820] ISO 9660 Extensions: RRIP_1991A
[110251.324775] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[111319.289927] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[111488.947414] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[112784.669300] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[113245.151307] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[113951.240506] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[114075.690400] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[141153.801425] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[142827.089647] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[143373.845483] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[145026.240307] general protection fault: 0000 [1] PREEMPT SMP
[145026.240313] CPU 0
[145026.240315] Modules linked in:
[145026.240318] Pid: 32546, comm: kmail Not tainted 2.6.25-rc8-00166-g6fdf5e6 #1
[145026.240320] RIP: 0010:[<ffffffff80275274>] [<ffffffff80275274>] set_page_dirty+0x34/0x90
[145026.240327] RSP: 0018:ffff810004ba9d98 EFLAGS: 00010206
[145026.240328] RAX: 6b636f6c5f747369 RBX: ffff81000779cae0 RCX: ffff8100010046e0
[145026.240330] RDX: ffffffff802c08d0 RSI: 8000000033d60067 RDI: ffffe20000b56d00
[145026.240332] RBP: 000000000115c000 R08: 0000000000000006 R09: 0000000000000001
[145026.240334] R10: 0000000000000002 R11: 000000000000031b R12: ffffe20000b56d00
[145026.240335] R13: 0000000001200000 R14: 0000000033d60067 R15: 0000000000000000
[145026.240338] FS: 0000000000000000(0000) GS:ffffffff80993000(0000) knlGS:0000000000000000
[145026.240340] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[145026.240341] CR2: 00007f695e7aa3f0 CR3: 0000000000201000 CR4: 00000000000006e0
[145026.240343] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[145026.240345] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[145026.240347] Process kmail (pid: 32546, threadinfo ffff810004ba8000, task ffff81002137a000)
[145026.240348] Stack: 0000000001155000 ffff81000779cae0 000000000115c000 ffffffff8027e271
[145026.240353] 0000000000000000 0000000001574fff 0000000000000000 ffff810004ba9ea8
[145026.240357] ffffffffffffffff 0000000000000000 ffff81003af86bd0 ffff810004ba9eb0
[145026.240360] Call Trace:
[145026.240364] [<ffffffff8027e271>] ? unmap_vmas+0x611/0x800
[145026.240367] [<ffffffff8028252a>] ? exit_mmap+0x8a/0x130
[145026.240370] [<ffffffff80236957>] ? mmput+0x57/0xe0
[145026.240373] [<ffffffff8023cc8a>] ? do_exit+0x19a/0x7e0
[145026.240377] [<ffffffff807079fb>] ? lockdep_sys_exit_thunk+0x35/0x67
[145026.240381] [<ffffffff803f6281>] ? __up_read+0x21/0xb0
[145026.240383] [<ffffffff8023d303>] ? do_group_exit+0x33/0xa0
[145026.240386] [<ffffffff8020b56b>] ? system_call_after_swapgs+0x7b/0x80
[145026.240387]
[145026.240388]
[145026.240389] Code: 48 8b 47 18 66 85 d2 78 70 a8 01 75 50 48 85 c0 74 4b 48 8b 80 b8 00 00 00 48 c7 c2 d0 08 2c 80 48 8b 40 20 48 85 c0 48 0f 44 c2 <ff> d0 85 c0 89 c5 74 21 65 48 8b 34 25 00 00 00 00 48 81 c6 d0
[145026.240416] RIP [<ffffffff80275274>] set_page_dirty+0x34/0x90
[145026.240419] RSP <ffff810004ba9d98>
[145026.240423] ---[ end trace 6b50f2d712edcd7a ]---
[145026.240424] Fixing recursive fault but reboot is needed!
[145026.240426] BUG: scheduling while atomic: kmail/32546/0x00000003
[145026.240428] INFO: lockdep is turned off.
[145026.240430] Pid: 32546, comm: kmail Tainted: G D 2.6.25-rc8-00166-g6fdf5e6 #1
[145026.240431]
[145026.240432] Call Trace:
[145026.240435] [<ffffffff80705a26>] thread_return+0x34c/0x576
[145026.240437] [<ffffffff80239469>] release_console_sem+0x49/0x200
[145026.240439] [<ffffffff80239e5e>] printk+0x4e/0x60
[145026.240441] [<ffffffff8023d29e>] do_exit+0x7ae/0x7e0
[145026.240444] [<ffffffff8022e223>] __wake_up+0x43/0x70
[145026.240446] [<ffffffff8020c8e7>] oops_end+0x87/0x90
[145026.240448] [<ffffffff8070884d>] error_exit+0x0/0x9a
[145026.240452] [<ffffffff802c08d0>] __set_page_dirty_buffers+0x0/0xc0
[145026.240454] [<ffffffff80275274>] set_page_dirty+0x34/0x90
[145026.240457] [<ffffffff8027b6f8>] __dec_zone_state+0x18/0x80
[145026.240459] [<ffffffff8027e271>] unmap_vmas+0x611/0x800
[145026.240461] [<ffffffff8028252a>] exit_mmap+0x8a/0x130
[145026.240463] [<ffffffff80236957>] mmput+0x57/0xe0
[145026.240466] [<ffffffff8023cc8a>] do_exit+0x19a/0x7e0
[145026.240468] [<ffffffff807079fb>] lockdep_sys_exit_thunk+0x35/0x67
[145026.240470] [<ffffffff803f6281>] __up_read+0x21/0xb0
[145026.240473] [<ffffffff8023d303>] do_group_exit+0x33/0xa0
[145026.240475] [<ffffffff8020b56b>] system_call_after_swapgs+0x7b/0x80
[145026.240476]
[-- Attachment #4: lspci-output.txt --]
[-- Type: text/plain, Size: 15626 bytes --]
00:00.0 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
Subsystem: ASRock Incorporation Unknown device 0308
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+
Latency: 8, Cache Line Size: 32 bytes
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Capabilities: [80] AGP version 3.5
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:00.1 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
Subsystem: ASRock Incorporation Unknown device 1308
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
00:00.2 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
Subsystem: ASRock Incorporation Unknown device 2308
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:00.4 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
Subsystem: ASRock Incorporation Unknown device 4308
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
00:00.5 PIC: VIA Technologies, Inc. PT894 I/O APIC Interrupt Controller (prog-if 20 [IO(X)-APIC])
Subsystem: ASRock Incorporation Unknown device 5308
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
00:00.7 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: fa800000-fa8fffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.0 PCI bridge: VIA Technologies, Inc. PT890 PCI to PCI Bridge Controller (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fa900000-fe9fffff
Prefetchable memory behind bridge: aff00000-cfefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <1us, L1 unlimited
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 0
Link: Latency L0s <64ns, L1 <1us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
Slot: Number 16, PowerLimit 75.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Unknown, PwrInd Unknown, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable+
Address: 00000000fee0300c Data: 4151
Masking: 00000001 Pending: 00000000
00:0b.0 Network controller: RaLink RT2561/RT61 802.11g PCI
Subsystem: RaLink Unknown device 2561
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at febf0000 (32-bit, non-prefetchable) [size=32K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0c.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 08)
Subsystem: Creative Labs SBLive! 5.1 Model SB0100
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at ef00 [size=32]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0c.1 Input device controller: Creative Labs SB Live! Game Port (rev 08)
Subsystem: Creative Labs Gameport Joystick
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 0: I/O ports at ec00 [size=8]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 IDE interface: VIA Technologies, Inc. VT8237A SATA 2-Port Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASRock Incorporation Unknown device 0591
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin B routed to IRQ 21
Region 0: I/O ports at dc00 [size=8]
Region 1: I/O ports at d880 [size=4]
Region 2: I/O ports at d800 [size=8]
Region 3: I/O ports at d480 [size=4]
Region 4: I/O ports at d400 [size=16]
Region 5: I/O ports at d000 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 07) (prog-if 8a [Master SecP PriP])
Subsystem: ASRock Incorporation K7VT2/K7VT6 motherboard
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at fc00 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0) (prog-if 00 [UHCI])
Subsystem: ASRock Incorporation K7VT6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at e000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0) (prog-if 00 [UHCI])
Subsystem: ASRock Incorporation K7VT6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 22
Region 4: I/O ports at e080 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0) (prog-if 00 [UHCI])
Subsystem: ASRock Incorporation K7VT6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 21
Region 4: I/O ports at e400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0) (prog-if 00 [UHCI])
Subsystem: ASRock Incorporation K7VT6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 23
Region 4: I/O ports at e480 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20 [EHCI])
Subsystem: ASRock Incorporation K7VT6 motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 21
Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237A PCI to ISA Bridge
Subsystem: ASRock Incorporation Unknown device 3337
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK Controller
Subsystem: VIA Technologies, Inc. Unknown device 337e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+
Latency: 32
Capabilities: [58] HyperTransport: Interrupt Discovery and Configuration
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c)
Subsystem: ASRock Incorporation K7VT6 motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at e800 [size=256]
Region 1: Memory at febffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:13.0 Host bridge: VIA Technologies, Inc. VT8237A Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: [60] HyperTransport: MSI Mapping
02:00.0 VGA compatible controller: nVidia Corporation G70 [GeForce 7300 GT] (rev a1) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at b0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
Region 5: I/O ports at cc00 [size=128]
Expansion ROM at fe9e0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <1us, L1 <4us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
Link: Latency L0s <1us, L1 <4us
Link: ASPM Disabled RCB 128 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
next reply other threads:[~2008-04-07 7:55 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-07 7:49 Plamen Petrov [this message]
2008-04-07 9:01 ` linux 2.6.25-rc8-00166-g6fdf5e6 BUG Rafael J. Wysocki
2008-04-07 9:40 ` Plamen Petrov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47F9D21F.4080804@fs.ru.acad.bg \
--to=plamen.petrov@fs.ru.acad.bg \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.