All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tejun Heo <htejun@gmail.com>
To: Jeff Garzik <jeff@garzik.org>, Mark Lord <liml@rtr.ca>,
	IDE/ATA development list <linux-ide@vger.kernel.org>
Subject: [PATCH #upstream 1/2] libata: kill dead code paths in reset path
Date: Tue, 08 Apr 2008 01:25:35 +0900	[thread overview]
Message-ID: <47FA4AFF.2010209@gmail.com> (raw)

Some code paths which had been made obsolete by recent reset
simplification were still around.  Kill them.

* ata_eh_reset() checked for ATA_DEV_UNKNOWN to determine
  classification failure.  This is no longer applicable.

* ata_do_reset() should convert ATA_DEV_UNKNOWN to ATA_DEV_NONE
  regardless of reset result (e.g. -EAGAIN).

* LLDs don't need to convert ATA_DEV_UNKNOWN to ATA_DEV_NONE.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/libata-eh.c     |   19 +------------------
 drivers/ata/sata_inic162x.c |    2 --
 drivers/ata/sata_sil24.c    |    3 ---
 3 files changed, 1 insertion(+), 23 deletions(-)

Index: work/drivers/ata/libata-eh.c
===================================================================
--- work.orig/drivers/ata/libata-eh.c
+++ work/drivers/ata/libata-eh.c
@@ -2052,15 +2052,13 @@ static int ata_do_reset(struct ata_link 
 		classes[dev->devno] = ATA_DEV_UNKNOWN;
 
 	rc = reset(link, classes, deadline);
-	if (rc)
-		return rc;
 
 	/* convert all ATA_DEV_UNKNOWN to ATA_DEV_NONE */
 	ata_link_for_each_dev(dev, link)
 		if (classes[dev->devno] == ATA_DEV_UNKNOWN)
 			classes[dev->devno] = ATA_DEV_NONE;
 
-	return 0;
+	return rc;
 }
 
 static int ata_eh_followup_srst_needed(struct ata_link *link,
@@ -2209,21 +2207,6 @@ int ata_eh_reset(struct ata_link *link, 
 	if (rc && rc != -EAGAIN)
 		goto fail;
 
-	/* was classification successful? */
-	if (classify && classes[0] == ATA_DEV_UNKNOWN &&
-	    !(lflags & ATA_LFLAG_ASSUME_CLASS)) {
-		if (try < max_tries) {
-			ata_link_printk(link, KERN_WARNING,
-					"classification failed\n");
-			rc = -EINVAL;
-			goto fail;
-		}
-
-		ata_link_printk(link, KERN_WARNING,
-				"classfication failed, assuming ATA\n");
-		lflags |= ATA_LFLAG_ASSUME_ATA;
-	}
-
  done:
 	ata_link_for_each_dev(dev, link) {
 		/* After the reset, the device state is PIO 0 and the
Index: work/drivers/ata/sata_inic162x.c
===================================================================
--- work.orig/drivers/ata/sata_inic162x.c
+++ work/drivers/ata/sata_inic162x.c
@@ -428,8 +428,6 @@ static int inic_hardreset(struct ata_lin
 
 		ata_sff_tf_read(ap, &tf);
 		*class = ata_dev_classify(&tf);
-		if (*class == ATA_DEV_UNKNOWN)
-			*class = ATA_DEV_NONE;
 	}
 
 	return 0;
Index: work/drivers/ata/sata_sil24.c
===================================================================
--- work.orig/drivers/ata/sata_sil24.c
+++ work/drivers/ata/sata_sil24.c
@@ -693,9 +693,6 @@ static int sil24_softreset(struct ata_li
 	sil24_read_tf(ap, 0, &tf);
 	*class = ata_dev_classify(&tf);
 
-	if (*class == ATA_DEV_UNKNOWN)
-		*class = ATA_DEV_NONE;
-
  out:
 	DPRINTK("EXIT, class=%u\n", *class);
 	return 0;

             reply	other threads:[~2008-04-07 16:25 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-04-07 16:25 Tejun Heo [this message]
2008-04-07 16:46 ` [PATCH #upstream 2/2] libata: move link onlineness check out of softreset methods Tejun Heo
2008-04-12  4:35 ` [PATCH #upstream 1/2] libata: kill dead code paths in reset path Jeff Garzik
2008-04-13 16:27   ` Mark Lord
2008-04-14 20:52     ` sata_mv & pmp support Mark Lord
2008-04-15  2:01       ` Tejun Heo
2008-04-15 14:03         ` Mark Lord
2008-04-15 14:04           ` Mark Lord
     [not found]       ` <4803C850.9010901@rtr.ca>
2008-04-15  2:07         ` Tejun Heo
2008-04-15 19:59           ` Mark Lord
2008-04-15 20:14             ` Mark Lord
2008-04-15 22:36               ` Tejun Heo
2008-04-15 22:53                 ` Mark Lord
2008-04-16  2:03                   ` Mark Lord
2008-04-16  2:10                     ` Tejun Heo
2008-04-16  7:05                       ` Gwendal Grignou
2008-04-16 12:43                         ` Mark Lord
2008-04-16 12:37                       ` Mark Lord
2008-04-16 12:45                       ` Mark Lord
2008-04-16 15:41                         ` Mark Lord
2008-04-16 22:19                           ` Tejun Heo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=47FA4AFF.2010209@gmail.com \
    --to=htejun@gmail.com \
    --cc=jeff@garzik.org \
    --cc=liml@rtr.ca \
    --cc=linux-ide@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.