From mboxrd@z Thu Jan  1 00:00:00 1970
From: Eric BENARD <ebenard@free.fr>
Date: Mon, 07 Apr 2008 22:55:16 +0200
Subject: [U-Boot-Users] AT91SAM9260EK with KS8721 PHY
In-Reply-To: <1207601357.5709.25.camel@galileo>
References: <47FA1E97.50706@vermin.nl>
	<1207576185.6290.4.camel@galileo>	<47FA2C30.7050609@vermin.nl>
	<1207598435.5709.14.camel@galileo>	<47FA82C3.70002@free.fr>
	<1207601357.5709.25.camel@galileo>
Message-ID: <47FA8A34.8080603@free.fr>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Stelian Pop a ?crit :
> Hmm, if I sed:
> 	s/KS8721/DM9161/g
> and
> 	s/ks8721/dm9161/g
> 
> on your files I find almost no change with regard to the original
> version, except:
> 
> #define PHY_ADDRESS (1<<5)
> 
> and a #if 0 commenting out a bit of the initialisation sequence...
> 
yes, goal was to make a clean driver starting from dm9161 with 
PHY_ADDRESS in the config file ... but I didn't had time to progress on 
it :-(
Isolate problem can happen depending on the pullup/down configuration I 
think (I didn't check in tthe datasheet, but I once met the problem).

> This makes me think it may only be a PHY_ADDRESS issue: what happens if
> you change in cpu/arm926ejs/at91sam9/ether.c :
> 
> macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 0x00);
> 
> to
> 
> macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 1<<5);
> 
It's not running on a 9260 so I can't test but it should work (and this 
may be the problem Sander have).

Eric