Re: Domain status after shutdown command: ---s--

[Dominik Klein <dk@in-telegence.net>]

So I'm not alone with that problem.

I just tested with 3.2.1rc3 and the problem persists.

Regards
Dominik

Marc Patino Gómez wrote:
> Hi all,
> 
> I have the same problem, I'm using also Debian Etch on AMD64 and Xen 
> 3.2.0 builded from sources. At the moment, I am trying to find a 
> solution for this issue.
> 
> Regards,
> 
> Marc
> 
> Dominik Klein wrote:
>> Hi
>>
>> this was already on xen-users, but noone could help.
>>
>> I use Xen 3.2 on debian etch, build from source. domU is also debian 
>> etch.
>>
>> I can create the domain just fine, but when I shut it down, it stays 
>> in status "---s--" forever until I use "xm destroy".
>>
>> At first, I put domU on a DRBD disk with the block-drbd script, but I 
>> also tried with a file-backed domU, which results in the same problem.
>>
>> The logs do not show any errors. Or at least I cannot see anything 
>> that looks like an error.
>>
>> Here's what I see if I shutdown the domain from a console:
>>
>> debian dktestvmxen:~# halt
>> Broadcast message from root@dktestvmxen (tty1) (Mon Feb 11 08:32:34 
>> 2008):
>> The system is going down for system halt NOW!
>> INIT: Switching to runlevel: 0
>> INIT: Sending processes the TERM signal
>> Stopping periodic command scheduler: crond.
>> Stopping internet superserver: inetd.
>> Stopping OpenBSD Secure Shell server: sshd.
>> Stopping kernel log daemon: klogd.
>> Stopping system log daemon: syslogd.
>> Asking all remaining processes to terminate...done.
>> Killing all remaining processes...done.
>> Deconfiguring network interfaces...done.
>> Cleaning up ifupdown....
>> Deactivating swap...done.
>> Will now halt.
>> md: stopping all md devices.
>> xenbus_dev_shutdown: device/console/0: Initialising != Connected, 
>> skipping
>> System halted.
>>
>> At this point, the console is locked. If I quit the console with 
>> CTRL+5 and use "xm list", I see
>>
>> # xm list
>> Name                                        ID   Mem VCPUs      State 
>> Time(s)
>> Domain-0                                     0   256     1     r----- 
>> 37627.4
>> dktestvmxen                                  1   256     1     
>> ---s--    4.8
>>
>> Here's my domU config file:
>>
>> kernel='/boot/vmlinuz-2.6.18.8-xen'
>> ramdisk='/boot/initrd-2.6.18.8-xen.img'
>> disk = [ 'file:/dktestvmxen.img,hda1,w' ]
>> memory = 256
>> maxmem = 512
>> builder = 'linux'
>> name = 'dktestvmxen'
>> vif = [ 'mac=00:16:3e:13:71:7b,bridge=eth1' ]
>> localtime = 0
>> on_poweroff = 'destroy'
>> on_reboot = 'restart'
>> on_crash = 'restart'
>> root = '/dev/hda1'
>> extra='TERM=xterm xencons=tty console=tty1'
>>
>> This also happens if I shutdown the domain with "shutdown -hP now" or 
>> "xm shutdown $domid" from dom0.
>>
>> Any help would be much appreciated.
>>
>> Regards
>> Dominik
>>
>> _______________________________________________
>> Xen-devel mailing list
>> Xen-devel@lists.xensource.com
>> http://lists.xensource.com/xen-devel
> 
>